LinuxLists.cc - [PATCH RFC] mhi: Enable unique QRTR node ID support

2020-10-16 20:04:00

Subject: [PATCH RFC] mhi: Enable unique QRTR node ID support

2020-10-16 20:04:09

Subject: [PATCH RFC] bus: mhi: core: Enable unique QRTR node ID support

On multi-mhi platforms, host WiFi driver and
QMI test driver needs to differntiate between
QMI packets received from multiple mhi devices.

With QCN9000 PCI cards, once SBL gets loaded, we
utilize ERRDBG2 register to write a unique value
per mhi device from device-tree that the device
utilizes to set a unique QRTR node ID and
instance ID for the QMI service. This helps QRTR
stack in differenting the packets in a multi-mhi
environment and can route them accordingly.

sample:
root@OpenWrt:/# qrtr-lookup
Service Version Instance Node Port
69 1 40 40 2 ATH10k WLAN firmware service
15 1 0 40 1 Test service
69 1 39 39 2 ATH10k WLAN firmware service
15 1 0 39 1 Test service

Here on column 4, 39 and 40 are the node IDs that
is unique per mhi device.

Signed-off-by: Gokul Sriram Palanisamy <[email protected]>
---
.../devicetree/bindings/mhi/qcom,mhi.yaml | 36 ++++++++++++++++++++++
drivers/bus/mhi/core/boot.c | 14 +++++++++
2 files changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mhi/qcom,mhi.yaml

diff --git a/Documentation/devicetree/bindings/mhi/qcom,mhi.yaml b/Documentation/devicetree/bindings/mhi/qcom,mhi.yaml
new file mode 100644
index 0000000..f763e9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mhi/qcom,mhi.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/qcom,pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Modem Host Interface
+
+maintainers:
+ - Gokul Sriram Palanisamy <[email protected]>
+
+properties:
+ qrtr-instance-id:
+ const: 32
+
+required:
+ - reg
+ - qrtr-instance-id
+
+examples:
+ - |
+ pcie: pci@10000000 {
+ compatible = "qcom,pcie-qcs404";
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+
+ pcie0_rp: pcie0_rp {
+ reg = <0 0 0 0 0>;
+ status = "ok";
+ mhi_0: qcom,mhi@0 {
+ reg = <0 0 0 0 0 >;
+ qrtr_instance_id = <0x20>;
+ };
+ };
+ };
diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 0b38014..7406f28 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -18,6 +18,9 @@
#include <linux/wait.h>
#include "internal.h"

+#define QRTR_INSTANCE_MASK 0x0000FFFF
+#define QRTR_INSTANCE_SHIFT 0
+
/* Setup RDDM vector table for RDDM transfer and program RXVEC */
void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
struct image_info *img_info)
@@ -445,6 +448,17 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
return;
}

+ if (!ret && mhi_cntrl->cntrl_dev->of_node) {
+ ret = of_property_read_u32(mhi_cntrl->cntrl_dev->of_node,
+ "qrtr-instance-id", &instance);
+ if (!ret) {
+ instance &= QRTR_INSTANCE_MASK;
+ mhi_write_reg_field(mhi_cntrl, mhi_cntrl->bhi,
+ BHI_ERRDBG2, QRTR_INSTANCE_MASK,
+ QRTR_INSTANCE_SHIFT, instance);
+ }
+ }
+
if (mhi_cntrl->ee == MHI_EE_EDL)
return;

--
2.7.4

2020-10-16 22:54:29

by Jeffrey Hugo

[permalink] [raw]

Subject: Re: [PATCH RFC] bus: mhi: core: Enable unique QRTR node ID support

On 10/16/2020 1:04 PM, Gokul Sriram Palanisamy wrote:
> On multi-mhi platforms, host WiFi driver and
> QMI test driver needs to differntiate between
> QMI packets received from multiple mhi devices.
>
> With QCN9000 PCI cards, once SBL gets loaded, we
> utilize ERRDBG2 register to write a unique value
> per mhi device from device-tree that the device
> utilizes to set a unique QRTR node ID and
> instance ID for the QMI service. This helps QRTR
> stack in differenting the packets in a multi-mhi
> environment and can route them accordingly.
>
> sample:
> root@OpenWrt:/# qrtr-lookup
> Service Version Instance Node Port
> 69 1 40 40 2 ATH10k WLAN firmware service
> 15 1 0 40 1 Test service
> 69 1 39 39 2 ATH10k WLAN firmware service
> 15 1 0 39 1 Test service
>
> Here on column 4, 39 and 40 are the node IDs that
> is unique per mhi device.
>
> Signed-off-by: Gokul Sriram Palanisamy <[email protected]>
> ---
> .../devicetree/bindings/mhi/qcom,mhi.yaml | 36 ++++++++++++++++++++++
> drivers/bus/mhi/core/boot.c | 14 +++++++++
> 2 files changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mhi/qcom,mhi.yaml
>
> diff --git a/Documentation/devicetree/bindings/mhi/qcom,mhi.yaml b/Documentation/devicetree/bindings/mhi/qcom,mhi.yaml
> new file mode 100644
> index 0000000..f763e9f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mhi/qcom,mhi.yaml
> @@ -0,0 +1,36 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/qcom,pcie.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Modem Host Interface
> +
> +maintainers:
> + - Gokul Sriram Palanisamy <[email protected]>
> +
> +properties:
> + qrtr-instance-id:
> + const: 32
> +
> +required:
> + - reg
> + - qrtr-instance-id
> +
> +examples:
> + - |
> + pcie: pci@10000000 {
> + compatible = "qcom,pcie-qcs404";
> + status = "ok";
> + perst-gpio = <&tlmm 58 0x1>;
> +
> + pcie0_rp: pcie0_rp {
> + reg = <0 0 0 0 0>;
> + status = "ok";
> + mhi_0: qcom,mhi@0 {
> + reg = <0 0 0 0 0 >;
> + qrtr_instance_id = <0x20>;
> + };
> + };
> + };

So, its impossible for me to have multiple QCN9000 PCI devices on say an
x86 host, since x86 doesn't support DT?

Also, I have to know ahead of time, when I'm writing the DT, how many of
these devices I'm going to have in a system, and if I decide to add N
more at a later time, I'm back at square 1?

> diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
> index 0b38014..7406f28 100644
> --- a/drivers/bus/mhi/core/boot.c
> +++ b/drivers/bus/mhi/core/boot.c
> @@ -18,6 +18,9 @@
> #include <linux/wait.h>
> #include "internal.h"
>
> +#define QRTR_INSTANCE_MASK 0x0000FFFF
> +#define QRTR_INSTANCE_SHIFT 0

I fail to understand why IPC Router specific stuff is being clobbered
into MHI.

> +
> /* Setup RDDM vector table for RDDM transfer and program RXVEC */
> void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
> struct image_info *img_info)
> @@ -445,6 +448,17 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
> return;
> }
>
> + if (!ret && mhi_cntrl->cntrl_dev->of_node) {
> + ret = of_property_read_u32(mhi_cntrl->cntrl_dev->of_node,
> + "qrtr-instance-id", &instance);
> + if (!ret) {
> + instance &= QRTR_INSTANCE_MASK;
> + mhi_write_reg_field(mhi_cntrl, mhi_cntrl->bhi,
> + BHI_ERRDBG2, QRTR_INSTANCE_MASK,
> + QRTR_INSTANCE_SHIFT, instance);

This violates the BHI spec which states that this register is read only
from the host perspective. You cannot write to it.

Overall, I get why you are attempting to do this, but solution proposed
in this RFC is pretty bad. I'm thinking it would be better to have the
QCN9000 "generate" its node id based on the assigned PCI bus address
(SBDF) The current Router maintainers should probably weigh in to
ensure that won't cause conflicts in the node id space.

--
Jeffrey Hugo
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.