2020-10-30 05:59:49

by Willy Liu

[permalink] [raw]
Subject: [PATCH net-next] net: phy: realtek: Add support for RTL8221B-CG series

Realtek single-port 2.5Gbps Ethernet PHYs are list as below:
RTL8226-CG: the 1st generation 2.5Gbps single port PHY
RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY
RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY
RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature

This patch adds the minimal drivers to manage these transceivers.

Signed-off-by: Willy Liu <[email protected]>
---
drivers/net/phy/realtek.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
mode change 100644 => 100755 drivers/net/phy/realtek.c

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
old mode 100644
new mode 100755
index fb1db71..2ba0d73
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -660,6 +660,46 @@ static int rtlgen_resume(struct phy_device *phydev)
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
}, {
+ PHY_ID_MATCH_EXACT(0x001cc838),
+ .name = "RTL8226-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc848),
+ .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc849),
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc84a),
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
.config_init = &rtl8366rb_config_init,
--
1.9.1


2020-10-30 15:36:05

by Jakub Kicinski

[permalink] [raw]
Subject: Re: [PATCH net-next] net: phy: realtek: Add support for RTL8221B-CG series

On Fri, 30 Oct 2020 13:56:20 +0800 Willy Liu wrote:
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> old mode 100644
> new mode 100755
> index fb1db71..2ba0d73

checkpatch says:

ERROR: do not set execute permissions for source files
#23: FILE: drivers/net/phy/realtek.c

total: 1 errors, 0 warnings, 0 checks, 46 lines checked

2020-10-30 15:57:43

by Andrew Lunn

[permalink] [raw]
Subject: Re: [PATCH net-next] net: phy: realtek: Add support for RTL8221B-CG series

On Fri, Oct 30, 2020 at 01:56:20PM +0800, Willy Liu wrote:
> Realtek single-port 2.5Gbps Ethernet PHYs are list as below:
> RTL8226-CG: the 1st generation 2.5Gbps single port PHY
> RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY
> RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY
> RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature
>
> This patch adds the minimal drivers to manage these transceivers.
>
> Signed-off-by: Willy Liu <[email protected]>

Reviewed-by: Andrew Lunn <[email protected]>

Andrew