add subject
On Thu, 2020-10-15 at 11:20 +0800, Neal Liu wrote:
> These patch series introduce a MediaTek MT6779 devapc driver.
>
> MediaTek bus fabric provides TrustZone security support and data protection to prevent slaves from being accessed by unexpected masters.
> The security violation is logged and sent to the processor for further analysis or countermeasures.
>
> Any occurrence of security violation would raise an interrupt, and it will be handled by mtk-devapc driver.
> The violation information is printed in order to find the murderer.
>
> changes since v7:
> - fix VIO_MOD_TO_REG_IND calculation wrong problem.
> - revise parameter type of ISR.
>
> changes since v6:
> - remove unnecessary mask/unmask module irq during ISR.
>
> changes since v5:
> - remove redundant write reg operation.
> - use static variable of vio_dbgs instead.
> - add stop_devapc() if driver is removed.
>
> changes since v4:
> - refactor data structure.
> - merge two simple functions into one.
> - refactor register setting to prevent too many function call overhead.
>
> changes since v3:
> - revise violation handling flow to make it more easily to understand
> hardware behavior.
> - add more comments to understand how hardware works.
>
> changes since v2:
> - pass platform info through DT data.
> - remove unnecessary function.
> - remove slave_type because it always equals to 1 in current support SoC.
> - use vio_idx_num instread of list all devices' index.
> - add more comments to describe hardware behavior.
>
> changes since v1:
> - move SoC specific part to DT data.
> - remove unnecessary boundary check.
> - remove unnecessary data type declaration.
> - use read_poll_timeout() instread of for loop polling.
> - revise coding style elegantly.
>
>
> *** BLURB HERE ***
>
> Neal Liu (2):
> dt-bindings: devapc: add bindings for mtk-devapc
> soc: mediatek: add mt6779 devapc driver
>
> .../bindings/soc/mediatek/devapc.yaml | 58 ++++
> drivers/soc/mediatek/Kconfig | 9 +
> drivers/soc/mediatek/Makefile | 1 +
> drivers/soc/mediatek/mtk-devapc.c | 308 ++++++++++++++++++
> 4 files changed, 376 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
> create mode 100644 drivers/soc/mediatek/mtk-devapc.c
>
Gentle ping for these patch series.
Thanks !
On Thu, 2020-10-15 at 11:24 +0800, Neal Liu wrote:
> add subject
>
> On Thu, 2020-10-15 at 11:20 +0800, Neal Liu wrote:
> > These patch series introduce a MediaTek MT6779 devapc driver.
> >
> > MediaTek bus fabric provides TrustZone security support and data protection to prevent slaves from being accessed by unexpected masters.
> > The security violation is logged and sent to the processor for further analysis or countermeasures.
> >
> > Any occurrence of security violation would raise an interrupt, and it will be handled by mtk-devapc driver.
> > The violation information is printed in order to find the murderer.
> >
> > changes since v7:
> > - fix VIO_MOD_TO_REG_IND calculation wrong problem.
> > - revise parameter type of ISR.
> >
> > changes since v6:
> > - remove unnecessary mask/unmask module irq during ISR.
> >
> > changes since v5:
> > - remove redundant write reg operation.
> > - use static variable of vio_dbgs instead.
> > - add stop_devapc() if driver is removed.
> >
> > changes since v4:
> > - refactor data structure.
> > - merge two simple functions into one.
> > - refactor register setting to prevent too many function call overhead.
> >
> > changes since v3:
> > - revise violation handling flow to make it more easily to understand
> > hardware behavior.
> > - add more comments to understand how hardware works.
> >
> > changes since v2:
> > - pass platform info through DT data.
> > - remove unnecessary function.
> > - remove slave_type because it always equals to 1 in current support SoC.
> > - use vio_idx_num instread of list all devices' index.
> > - add more comments to describe hardware behavior.
> >
> > changes since v1:
> > - move SoC specific part to DT data.
> > - remove unnecessary boundary check.
> > - remove unnecessary data type declaration.
> > - use read_poll_timeout() instread of for loop polling.
> > - revise coding style elegantly.
> >
> >
> > *** BLURB HERE ***
> >
> > Neal Liu (2):
> > dt-bindings: devapc: add bindings for mtk-devapc
> > soc: mediatek: add mt6779 devapc driver
> >
> > .../bindings/soc/mediatek/devapc.yaml | 58 ++++
> > drivers/soc/mediatek/Kconfig | 9 +
> > drivers/soc/mediatek/Makefile | 1 +
> > drivers/soc/mediatek/mtk-devapc.c | 308 ++++++++++++++++++
> > 4 files changed, 376 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
> > create mode 100644 drivers/soc/mediatek/mtk-devapc.c
> >
>
>