Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5).
Signed-off-by: Hugues Fruchet <[email protected]>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 85628e1..6cc5d2a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -90,6 +90,7 @@
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
+ bus-type = <5>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
--
2.7.4