There are several updates relating to the interrupt coalesce for
the HNS3 ethernet driver.
#1 adds support for QL(quantity limiting, interrupt coalesce
based on the frame quantity).
#2 queries the maximum value of GL from the firmware instead of
a fixed value in code.
#3 adds support for 1us unit GL(gap limiting, interrupt coalesce
based on the gap time).
#4 renames gl_adapt_enable in struct hns3_enet_coalesce to fit
its new usage.
#5 & #6 adds support for the dynamic interrupt moderation,
and adds a control private flag in ethtool.
#7 adds wrapper function for state initialization.
#8 adds a check for the read-only private flag.
#9 & #10 adds support for EQ/CQ configuration, and adds a control
private flag in ethtool.
change log:
V3 - fix a typo error in #1 reported by Jakub Kicinski.
rewrite #9 commit log.
remove #11 from this series.
V2 - reorder #2 & #3 to fix compiler error.
fix some checkpatch warnings in #10 & #11.
previous version:
V2: https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
V1: https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
Huazhong Tan (10):
net: hns3: add support for configuring interrupt quantity limiting
net: hns3: add support for querying maximum value of GL
net: hns3: add support for 1us unit GL configuration
net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesce
net: hns3: add support for dynamic interrupt moderation
net: hns3: add ethtool priv-flag for DIM
net: hns3: add hns3_state_init() to do state initialization
net: hns3: add a check for ethtool priv-flag interface
net: hns3: add support for EQ/CQ mode configuration
net: hns3: add ethtool priv-flag for EQ/CQ
drivers/net/ethernet/hisilicon/Kconfig | 1 +
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 12 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 258 ++++++++++++++++++---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 31 ++-
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 185 ++++++++++++++-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 8 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h | 8 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 8 +
10 files changed, 481 insertions(+), 39 deletions(-)
--
2.7.4
Add a control private flag in ethtool for enable/disable
DIM feature.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 7 +++
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 71 ++++++++++++++++++++++
3 files changed, 79 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index f9d4d23..18b3e43 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -716,6 +716,11 @@ struct hnae3_roce_private_info {
#define HNAE3_UPE (HNAE3_USER_UPE | HNAE3_OVERFLOW_UPE)
#define HNAE3_MPE (HNAE3_USER_MPE | HNAE3_OVERFLOW_MPE)
+enum hnae3_pflag {
+ HNAE3_PFLAG_DIM_ENABLE,
+ HNAE3_PFLAG_MAX
+};
+
struct hnae3_handle {
struct hnae3_client *client;
struct pci_dev *pdev;
@@ -738,6 +743,8 @@ struct hnae3_handle {
/* Network interface message level enabled bits */
u32 msg_enable;
+
+ unsigned long priv_flags;
};
#define hnae3_set_field(origin, mask, shift, val) \
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 9e895b9..a567557 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4246,6 +4246,7 @@ static int hns3_client_init(struct hnae3_handle *handle)
set_bit(HNS3_NIC_STATE_INITED, &priv->state);
set_bit(HNS3_NIC_STATE_DIM_ENABLE, &priv->state);
+ handle->priv_flags |= BIT(HNAE3_PFLAG_DIM_ENABLE);
if (netif_msg_drv(handle))
hns3_info_show(priv);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index c30d5d3..e8adc70 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -18,6 +18,11 @@ struct hns3_sfp_type {
u8 ext_type;
};
+struct hns3_pflag_desc {
+ char name[ETH_GSTRING_LEN];
+ void (*handler)(struct net_device *netdev, bool enable);
+};
+
/* tqp related stats */
#define HNS3_TQP_STAT(_string, _member) { \
.stats_string = _string, \
@@ -59,6 +64,8 @@ static const struct hns3_stats hns3_rxq_stats[] = {
HNS3_TQP_STAT("non_reuse_pg", non_reuse_pg),
};
+#define HNS3_PRIV_FLAGS_LEN ARRAY_SIZE(hns3_priv_flags)
+
#define HNS3_RXQ_STATS_COUNT ARRAY_SIZE(hns3_rxq_stats)
#define HNS3_TQP_STATS_COUNT (HNS3_TXQ_STATS_COUNT + HNS3_RXQ_STATS_COUNT)
@@ -394,6 +401,26 @@ static void hns3_self_test(struct net_device *ndev,
netif_dbg(h, drv, ndev, "self test end\n");
}
+static void hns3_update_state(struct net_device *netdev,
+ enum hns3_nic_state state, bool enable)
+{
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+
+ if (enable)
+ set_bit(state, &priv->state);
+ else
+ clear_bit(state, &priv->state);
+}
+
+static void hns3_update_dim_state(struct net_device *netdev, bool enable)
+{
+ hns3_update_state(netdev, HNS3_NIC_STATE_DIM_ENABLE, enable);
+}
+
+static const struct hns3_pflag_desc hns3_priv_flags[HNAE3_PFLAG_MAX] = {
+ { "dim_enable", hns3_update_dim_state },
+};
+
static int hns3_get_sset_count(struct net_device *netdev, int stringset)
{
struct hnae3_handle *h = hns3_get_handle(netdev);
@@ -410,6 +437,9 @@ static int hns3_get_sset_count(struct net_device *netdev, int stringset)
case ETH_SS_TEST:
return ops->get_sset_count(h, stringset);
+ case ETH_SS_PRIV_FLAGS:
+ return HNAE3_PFLAG_MAX;
+
default:
return -EOPNOTSUPP;
}
@@ -463,6 +493,7 @@ static void hns3_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
struct hnae3_handle *h = hns3_get_handle(netdev);
const struct hnae3_ae_ops *ops = h->ae_algo->ops;
char *buff = (char *)data;
+ int i;
if (!ops->get_strings)
return;
@@ -475,6 +506,13 @@ static void hns3_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
case ETH_SS_TEST:
ops->get_strings(h, stringset, data);
break;
+ case ETH_SS_PRIV_FLAGS:
+ for (i = 0; i < HNS3_PRIV_FLAGS_LEN; i++) {
+ snprintf(buff, ETH_GSTRING_LEN, "%s",
+ hns3_priv_flags[i].name);
+ buff += ETH_GSTRING_LEN;
+ }
+ break;
default:
break;
}
@@ -1516,6 +1554,35 @@ static int hns3_get_module_eeprom(struct net_device *netdev,
return ops->get_module_eeprom(handle, ee->offset, ee->len, data);
}
+static u32 hns3_get_priv_flags(struct net_device *netdev)
+{
+ struct hnae3_handle *handle = hns3_get_handle(netdev);
+
+ return handle->priv_flags;
+}
+
+static int hns3_set_priv_flags(struct net_device *netdev, u32 pflags)
+{
+ struct hnae3_handle *handle = hns3_get_handle(netdev);
+ u32 changed = pflags ^ handle->priv_flags;
+ u32 i;
+
+ for (i = 0; i < HNAE3_PFLAG_MAX; i++) {
+ if (changed & BIT(i)) {
+ bool enable = !(handle->priv_flags & BIT(i));
+
+ if (enable)
+ handle->priv_flags |= BIT(i);
+ else
+ handle->priv_flags &= ~BIT(i);
+
+ hns3_priv_flags[i].handler(netdev, enable);
+ }
+ }
+
+ return 0;
+}
+
#define HNS3_ETHTOOL_COALESCE (ETHTOOL_COALESCE_USECS | \
ETHTOOL_COALESCE_USE_ADAPTIVE | \
ETHTOOL_COALESCE_RX_USECS_HIGH | \
@@ -1546,6 +1613,8 @@ static const struct ethtool_ops hns3vf_ethtool_ops = {
.get_link = hns3_get_link,
.get_msglevel = hns3_get_msglevel,
.set_msglevel = hns3_set_msglevel,
+ .get_priv_flags = hns3_get_priv_flags,
+ .set_priv_flags = hns3_set_priv_flags,
};
static const struct ethtool_ops hns3_ethtool_ops = {
@@ -1582,6 +1651,8 @@ static const struct ethtool_ops hns3_ethtool_ops = {
.set_fecparam = hns3_set_fecparam,
.get_module_info = hns3_get_module_info,
.get_module_eeprom = hns3_get_module_eeprom,
+ .get_priv_flags = hns3_get_priv_flags,
+ .set_priv_flags = hns3_set_priv_flags,
};
void hns3_ethtool_set_ops(struct net_device *netdev)
--
2.7.4
For maintainability and compatibility, add support for querying
the maximum value of GL.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 1 -
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 14 ++++++++------
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 8 ++++++++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 ++++++
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h | 8 ++++++++
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 6 ++++++
8 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 912c51e..f9d4d23 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -278,6 +278,7 @@ struct hnae3_dev_specs {
u16 rss_ind_tbl_size;
u16 rss_key_size;
u16 int_ql_max; /* max value of interrupt coalesce based on INT_QL */
+ u16 max_int_gl; /* max value of interrupt coalesce based on INT_GL */
u8 max_non_tso_bd_num; /* max BD number of one non-TSO packet */
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index dc9a857..a5ebca8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -349,6 +349,7 @@ static void hns3_dbg_dev_specs(struct hnae3_handle *h)
dev_info(priv->dev, "Desc num per RX queue: %u\n", kinfo->num_rx_desc);
dev_info(priv->dev, "Total number of enabled TCs: %u\n", kinfo->num_tc);
dev_info(priv->dev, "MAX INT QL: %u\n", dev_specs->int_ql_max);
+ dev_info(priv->dev, "MAX INT GL: %u\n", dev_specs->max_int_gl);
}
static ssize_t hns3_dbg_cmd_read(struct file *filp, char __user *buffer,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 10990bd..be099dd 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -420,7 +420,6 @@ enum hns3_flow_level_range {
HNS3_FLOW_ULTRA = 3,
};
-#define HNS3_INT_GL_MAX 0x1FE0
#define HNS3_INT_GL_50K 0x0014
#define HNS3_INT_GL_20K 0x0032
#define HNS3_INT_GL_18K 0x0036
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index ec8f4ca..49d3061 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1130,19 +1130,21 @@ static int hns3_get_coalesce(struct net_device *netdev,
static int hns3_check_gl_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
+ struct hnae3_handle *handle = hns3_get_handle(netdev);
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(handle->pdev);
u32 rx_gl, tx_gl;
- if (cmd->rx_coalesce_usecs > HNS3_INT_GL_MAX) {
+ if (cmd->rx_coalesce_usecs > ae_dev->dev_specs.max_int_gl) {
netdev_err(netdev,
- "Invalid rx-usecs value, rx-usecs range is 0-%d\n",
- HNS3_INT_GL_MAX);
+ "invalid rx-usecs value, rx-usecs range is 0-%u\n",
+ ae_dev->dev_specs.max_int_gl);
return -EINVAL;
}
- if (cmd->tx_coalesce_usecs > HNS3_INT_GL_MAX) {
+ if (cmd->tx_coalesce_usecs > ae_dev->dev_specs.max_int_gl) {
netdev_err(netdev,
- "Invalid tx-usecs value, tx-usecs range is 0-%d\n",
- HNS3_INT_GL_MAX);
+ "invalid tx-usecs value, tx-usecs range is 0-%u\n",
+ ae_dev->dev_specs.max_int_gl);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 096e26a..5b7967c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -1103,6 +1103,14 @@ struct hclge_dev_specs_0_cmd {
__le32 max_tm_rate;
};
+#define HCLGE_DEF_MAX_INT_GL 0x1FE0U
+
+struct hclge_dev_specs_1_cmd {
+ __le32 rsv0;
+ __le16 max_int_gl;
+ u8 rsv1[18];
+};
+
int hclge_cmd_init(struct hclge_dev *hdev);
static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
{
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 8bcdb28..7102001 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1366,6 +1366,7 @@ static void hclge_set_default_dev_specs(struct hclge_dev *hdev)
ae_dev->dev_specs.rss_ind_tbl_size = HCLGE_RSS_IND_TBL_SIZE;
ae_dev->dev_specs.rss_key_size = HCLGE_RSS_KEY_SIZE;
ae_dev->dev_specs.max_tm_rate = HCLGE_ETHER_MAX_RATE;
+ ae_dev->dev_specs.max_int_gl = HCLGE_DEF_MAX_INT_GL;
}
static void hclge_parse_dev_specs(struct hclge_dev *hdev,
@@ -1373,8 +1374,10 @@ static void hclge_parse_dev_specs(struct hclge_dev *hdev,
{
struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
struct hclge_dev_specs_0_cmd *req0;
+ struct hclge_dev_specs_1_cmd *req1;
req0 = (struct hclge_dev_specs_0_cmd *)desc[0].data;
+ req1 = (struct hclge_dev_specs_1_cmd *)desc[1].data;
ae_dev->dev_specs.max_non_tso_bd_num = req0->max_non_tso_bd_num;
ae_dev->dev_specs.rss_ind_tbl_size =
@@ -1382,6 +1385,7 @@ static void hclge_parse_dev_specs(struct hclge_dev *hdev,
ae_dev->dev_specs.int_ql_max = le16_to_cpu(req0->int_ql_max);
ae_dev->dev_specs.rss_key_size = le16_to_cpu(req0->rss_key_size);
ae_dev->dev_specs.max_tm_rate = le32_to_cpu(req0->max_tm_rate);
+ ae_dev->dev_specs.max_int_gl = le16_to_cpu(req1->max_int_gl);
}
static void hclge_check_dev_specs(struct hclge_dev *hdev)
@@ -1396,6 +1400,8 @@ static void hclge_check_dev_specs(struct hclge_dev *hdev)
dev_specs->rss_key_size = HCLGE_RSS_KEY_SIZE;
if (!dev_specs->max_tm_rate)
dev_specs->max_tm_rate = HCLGE_ETHER_MAX_RATE;
+ if (!dev_specs->max_int_gl)
+ dev_specs->max_int_gl = HCLGE_DEF_MAX_INT_GL;
}
static int hclge_query_dev_specs(struct hclge_dev *hdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h
index 9460c12..f94f5d4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h
@@ -285,6 +285,14 @@ struct hclgevf_dev_specs_0_cmd {
u8 rsv1[5];
};
+#define HCLGEVF_DEF_MAX_INT_GL 0x1FE0U
+
+struct hclgevf_dev_specs_1_cmd {
+ __le32 rsv0;
+ __le16 max_int_gl;
+ u8 rsv1[18];
+};
+
static inline void hclgevf_write_reg(void __iomem *base, u32 reg, u32 value)
{
writel(value, base + reg);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 8209be9..71007e7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2991,6 +2991,7 @@ static void hclgevf_set_default_dev_specs(struct hclgevf_dev *hdev)
HCLGEVF_MAX_NON_TSO_BD_NUM;
ae_dev->dev_specs.rss_ind_tbl_size = HCLGEVF_RSS_IND_TBL_SIZE;
ae_dev->dev_specs.rss_key_size = HCLGEVF_RSS_KEY_SIZE;
+ ae_dev->dev_specs.max_int_gl = HCLGEVF_DEF_MAX_INT_GL;
}
static void hclgevf_parse_dev_specs(struct hclgevf_dev *hdev,
@@ -2998,14 +2999,17 @@ static void hclgevf_parse_dev_specs(struct hclgevf_dev *hdev,
{
struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
struct hclgevf_dev_specs_0_cmd *req0;
+ struct hclgevf_dev_specs_1_cmd *req1;
req0 = (struct hclgevf_dev_specs_0_cmd *)desc[0].data;
+ req1 = (struct hclgevf_dev_specs_1_cmd *)desc[1].data;
ae_dev->dev_specs.max_non_tso_bd_num = req0->max_non_tso_bd_num;
ae_dev->dev_specs.rss_ind_tbl_size =
le16_to_cpu(req0->rss_ind_tbl_size);
ae_dev->dev_specs.int_ql_max = le16_to_cpu(req0->int_ql_max);
ae_dev->dev_specs.rss_key_size = le16_to_cpu(req0->rss_key_size);
+ ae_dev->dev_specs.max_int_gl = le16_to_cpu(req1->max_int_gl);
}
static void hclgevf_check_dev_specs(struct hclgevf_dev *hdev)
@@ -3018,6 +3022,8 @@ static void hclgevf_check_dev_specs(struct hclgevf_dev *hdev)
dev_specs->rss_ind_tbl_size = HCLGEVF_RSS_IND_TBL_SIZE;
if (!dev_specs->rss_key_size)
dev_specs->rss_key_size = HCLGEVF_RSS_KEY_SIZE;
+ if (!dev_specs->max_int_gl)
+ dev_specs->max_int_gl = HCLGEVF_DEF_MAX_INT_GL;
}
static int hclgevf_query_dev_specs(struct hclgevf_dev *hdev)
--
2.7.4
To improve the readability and maintainability, add hns3_state_init()
to initialize the state.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index a567557..f686723 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4144,6 +4144,16 @@ static void hns3_info_show(struct hns3_nic_priv *priv)
dev_info(priv->dev, "Max mtu size: %u\n", priv->netdev->max_mtu);
}
+static void hns3_state_init(struct hnae3_handle *handle)
+{
+ struct net_device *netdev = handle->kinfo.netdev;
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+
+ set_bit(HNS3_NIC_STATE_INITED, &priv->state);
+ set_bit(HNS3_NIC_STATE_DIM_ENABLE, &priv->state);
+ handle->priv_flags |= BIT(HNAE3_PFLAG_DIM_ENABLE);
+}
+
static int hns3_client_init(struct hnae3_handle *handle)
{
struct pci_dev *pdev = handle->pdev;
@@ -4244,9 +4254,7 @@ static int hns3_client_init(struct hnae3_handle *handle)
/* MTU range: (ETH_MIN_MTU(kernel default) - 9702) */
netdev->max_mtu = HNS3_MAX_MTU;
- set_bit(HNS3_NIC_STATE_INITED, &priv->state);
- set_bit(HNS3_NIC_STATE_DIM_ENABLE, &priv->state);
- handle->priv_flags |= BIT(HNAE3_PFLAG_DIM_ENABLE);
+ hns3_state_init(handle);
if (netif_msg_drv(handle))
hns3_info_show(priv);
--
2.7.4
For device whose version is above V3(include V3), the GL
configuration can set as 1us unit, so adds support for
configuring this field.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 26 ++++++++++++++++++----
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 +++++
3 files changed, 31 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 6e08719..2813fe5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -224,17 +224,27 @@ void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
void hns3_set_vector_coalesce_rx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value)
{
- u32 rx_gl_reg = hns3_gl_usec_to_reg(gl_value);
+ u32 new_val;
- writel(rx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL0_OFFSET);
+ if (tqp_vector->rx_group.coal.unit_1us)
+ new_val = gl_value | HNS3_INT_GL_1US;
+ else
+ new_val = hns3_gl_usec_to_reg(gl_value);
+
+ writel(new_val, tqp_vector->mask_addr + HNS3_VECTOR_GL0_OFFSET);
}
void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value)
{
- u32 tx_gl_reg = hns3_gl_usec_to_reg(gl_value);
+ u32 new_val;
+
+ if (tqp_vector->tx_group.coal.unit_1us)
+ new_val = gl_value | HNS3_INT_GL_1US;
+ else
+ new_val = hns3_gl_usec_to_reg(gl_value);
- writel(tx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
+ writel(new_val, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
}
void hns3_set_vector_coalesce_tx_ql(struct hns3_enet_tqp_vector *tqp_vector,
@@ -272,6 +282,14 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
rx_coal->flow_level = HNS3_FLOW_LOW;
tx_coal->flow_level = HNS3_FLOW_LOW;
+ /* device version above V3(include V3), GL can configure 1us
+ * unit, so uses 1us unit.
+ */
+ if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3) {
+ tx_coal->unit_1us = 1;
+ rx_coal->unit_1us = 1;
+ }
+
if (ae_dev->dev_specs.int_ql_max) {
tx_coal->ql_enable = 1;
rx_coal->ql_enable = 1;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index be099dd..4651ad1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -425,6 +425,8 @@ enum hns3_flow_level_range {
#define HNS3_INT_GL_18K 0x0036
#define HNS3_INT_GL_8K 0x007C
+#define HNS3_INT_GL_1US BIT(31)
+
#define HNS3_INT_RL_MAX 0x00EC
#define HNS3_INT_RL_ENABLE_MASK 0x40
@@ -436,6 +438,7 @@ struct hns3_enet_coalesce {
u16 int_ql_max;
u8 gl_adapt_enable:1;
u8 ql_enable:1;
+ u8 unit_1us:1;
enum hns3_flow_level_range flow_level;
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 49d3061..09aa608 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1148,6 +1148,12 @@ static int hns3_check_gl_coalesce_para(struct net_device *netdev,
return -EINVAL;
}
+ /* device version above V3(include V3), GL uses 1us unit,
+ * so the round down is not needed.
+ */
+ if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3)
+ return 0;
+
rx_gl = hns3_gl_round_down(cmd->rx_coalesce_usecs);
if (rx_gl != cmd->rx_coalesce_usecs) {
netdev_info(netdev,
--
2.7.4
For device whose version is above V3(include V3), the GL can
select EQ or CQ mode, so adds support for it.
In CQ mode, the coalesced timer will restart when the first new
completion occurs, while in EQ mode, the timer will not restart.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 49 +++++++++++++++++++++-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 8 ++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 +
5 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 3642740..345e8a4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -684,6 +684,7 @@ struct hnae3_knic_private_info {
u16 int_rl_setting;
enum pkt_hash_types rss_type;
+ void __iomem *io_base;
};
struct hnae3_roce_private_info {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index c30cf9e..d1243ea 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3653,9 +3653,7 @@ static void hns3_tx_dim_work(struct work_struct *work)
static void hns3_nic_init_dim(struct hns3_enet_tqp_vector *tqp_vector)
{
INIT_WORK(&tqp_vector->rx_group.dim.work, hns3_rx_dim_work);
- tqp_vector->rx_group.dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
INIT_WORK(&tqp_vector->tx_group.dim.work, hns3_tx_dim_work);
- tqp_vector->tx_group.dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
}
static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
@@ -4155,6 +4153,48 @@ static void hns3_state_init(struct hnae3_handle *handle)
set_bit(HNAE3_PFLAG_DIM_ENABLE, &handle->supported_pflags);
}
+static void hns3_set_cq_period_mode(struct hns3_nic_priv *priv,
+ enum dim_cq_period_mode mode, bool is_tx)
+{
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(priv->ae_handle->pdev);
+ struct hnae3_handle *handle = priv->ae_handle;
+ int i;
+
+ if (is_tx) {
+ priv->tx_cqe_mode = mode;
+
+ for (i = 0; i < priv->vector_num; i++)
+ priv->tqp_vector[i].tx_group.dim.mode = mode;
+ } else {
+ priv->rx_cqe_mode = mode;
+
+ for (i = 0; i < priv->vector_num; i++)
+ priv->tqp_vector[i].rx_group.dim.mode = mode;
+ }
+
+ /* only device version above V3(include V3), GL can switch CQ/EQ
+ * period mode.
+ */
+ if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3) {
+ u32 new_mode;
+ u64 reg;
+
+ new_mode = (mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE) ?
+ HNS3_CQ_MODE_CQE : HNS3_CQ_MODE_EQE;
+ reg = is_tx ? HNS3_GL1_CQ_MODE_REG : HNS3_GL0_CQ_MODE_REG;
+
+ writel(new_mode, handle->kinfo.io_base + reg);
+ }
+}
+
+static void hns3_cq_period_mode_init(struct hns3_nic_priv *priv,
+ enum dim_cq_period_mode tx_mode,
+ enum dim_cq_period_mode rx_mode)
+{
+ hns3_set_cq_period_mode(priv, tx_mode, true);
+ hns3_set_cq_period_mode(priv, rx_mode, false);
+}
+
static int hns3_client_init(struct hnae3_handle *handle)
{
struct pci_dev *pdev = handle->pdev;
@@ -4220,6 +4260,9 @@ static int hns3_client_init(struct hnae3_handle *handle)
goto out_init_ring;
}
+ hns3_cq_period_mode_init(priv, DIM_CQ_PERIOD_MODE_START_FROM_EQE,
+ DIM_CQ_PERIOD_MODE_START_FROM_EQE);
+
ret = hns3_init_phy(netdev);
if (ret)
goto out_init_phy;
@@ -4580,6 +4623,8 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
if (ret)
goto err_uninit_vector;
+ hns3_cq_period_mode_init(priv, priv->tx_cqe_mode, priv->rx_cqe_mode);
+
/* the device can work without cpu rmap, only aRFS needs it */
ret = hns3_set_rx_cpu_rmap(netdev);
if (ret)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index eb4e7ef..c6c082a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -188,6 +188,12 @@ enum hns3_nic_state {
#define HNS3_RING_EN_B 0
+#define HNS3_GL0_CQ_MODE_REG 0x20d00
+#define HNS3_GL1_CQ_MODE_REG 0x20d04
+#define HNS3_GL2_CQ_MODE_REG 0x20d08
+#define HNS3_CQ_MODE_EQE 1U
+#define HNS3_CQ_MODE_CQE 0U
+
enum hns3_pkt_l2t_type {
HNS3_L2_TYPE_UNICAST,
HNS3_L2_TYPE_MULTICAST,
@@ -495,6 +501,8 @@ struct hns3_nic_priv {
unsigned long state;
+ enum dim_cq_period_mode tx_cqe_mode;
+ enum dim_cq_period_mode rx_cqe_mode;
struct hns3_enet_coalesce tx_coal;
struct hns3_enet_coalesce rx_coal;
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 7102001..0573e68 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1738,6 +1738,7 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps)
nic->pdev = hdev->pdev;
nic->ae_algo = &ae_algo;
nic->numa_node_mask = hdev->numa_node_mask;
+ nic->kinfo.io_base = hdev->hw.io_base;
ret = hclge_knic_setup(vport, num_tqps,
hdev->num_tx_desc, hdev->num_rx_desc);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 71007e7..b628e52 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -515,6 +515,7 @@ static int hclgevf_set_handle_info(struct hclgevf_dev *hdev)
nic->pdev = hdev->pdev;
nic->numa_node_mask = hdev->numa_node_mask;
nic->flags |= HNAE3_SUPPORT_VF;
+ nic->kinfo.io_base = hdev->hw.io_base;
ret = hclgevf_knic_setup(hdev);
if (ret)
--
2.7.4
Add dynamic interrupt moderation support for the HNS3 driver.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/Kconfig | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 87 ++++++++++++++++++++++++-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 4 ++
3 files changed, 91 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 44f9279..fa6025d 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -130,6 +130,7 @@ config HNS3_ENET
default m
depends on 64BIT && PCI
depends on INET
+ select DIMLIB
help
This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 999a2aa..9e895b9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -96,6 +96,7 @@ static irqreturn_t hns3_irq_handle(int irq, void *vector)
struct hns3_enet_tqp_vector *tqp_vector = vector;
napi_schedule_irqoff(&tqp_vector->napi);
+ tqp_vector->event_cnt++;
return IRQ_HANDLED;
}
@@ -199,6 +200,8 @@ static void hns3_vector_disable(struct hns3_enet_tqp_vector *tqp_vector)
disable_irq(tqp_vector->vector_irq);
napi_disable(&tqp_vector->napi);
+ cancel_work_sync(&tqp_vector->rx_group.dim.work);
+ cancel_work_sync(&tqp_vector->tx_group.dim.work);
}
void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
@@ -3401,6 +3404,32 @@ static void hns3_update_new_int_gl(struct hns3_enet_tqp_vector *tqp_vector)
tqp_vector->last_jiffies = jiffies;
}
+static void hns3_update_rx_int_coalesce(struct hns3_enet_tqp_vector *tqp_vector)
+{
+ struct hns3_enet_ring_group *rx_group = &tqp_vector->rx_group;
+ struct dim_sample sample = {};
+
+ if (!rx_group->coal.adapt_enable)
+ return;
+
+ dim_update_sample(tqp_vector->event_cnt, rx_group->total_packets,
+ rx_group->total_bytes, &sample);
+ net_dim(&rx_group->dim, sample);
+}
+
+static void hns3_update_tx_int_coalesce(struct hns3_enet_tqp_vector *tqp_vector)
+{
+ struct hns3_enet_ring_group *tx_group = &tqp_vector->tx_group;
+ struct dim_sample sample = {};
+
+ if (!tx_group->coal.adapt_enable)
+ return;
+
+ dim_update_sample(tqp_vector->event_cnt, tx_group->total_packets,
+ tx_group->total_bytes, &sample);
+ net_dim(&tx_group->dim, sample);
+}
+
static int hns3_nic_common_poll(struct napi_struct *napi, int budget)
{
struct hns3_nic_priv *priv = netdev_priv(napi->dev);
@@ -3444,7 +3473,13 @@ static int hns3_nic_common_poll(struct napi_struct *napi, int budget)
if (napi_complete(napi) &&
likely(!test_bit(HNS3_NIC_STATE_DOWN, &priv->state))) {
- hns3_update_new_int_gl(tqp_vector);
+ if (test_bit(HNS3_NIC_STATE_DIM_ENABLE, &priv->state)) {
+ hns3_update_rx_int_coalesce(tqp_vector);
+ hns3_update_tx_int_coalesce(tqp_vector);
+ } else {
+ hns3_update_new_int_gl(tqp_vector);
+ }
+
hns3_mask_vector_irq(tqp_vector, 1);
}
@@ -3575,6 +3610,54 @@ static void hns3_nic_set_cpumask(struct hns3_nic_priv *priv)
}
}
+static void hns3_rx_dim_work(struct work_struct *work)
+{
+ struct dim *dim = container_of(work, struct dim, work);
+ struct hns3_enet_ring_group *group = container_of(dim,
+ struct hns3_enet_ring_group, dim);
+ struct hns3_enet_tqp_vector *tqp_vector = group->ring->tqp_vector;
+ struct dim_cq_moder cur_moder =
+ net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
+
+ hns3_set_vector_coalesce_rx_gl(group->ring->tqp_vector, cur_moder.usec);
+ tqp_vector->rx_group.coal.int_gl = cur_moder.usec;
+
+ if (cur_moder.pkts < tqp_vector->rx_group.coal.int_ql_max) {
+ hns3_set_vector_coalesce_rx_ql(tqp_vector, cur_moder.pkts);
+ tqp_vector->rx_group.coal.int_ql = cur_moder.pkts;
+ }
+
+ dim->state = DIM_START_MEASURE;
+}
+
+static void hns3_tx_dim_work(struct work_struct *work)
+{
+ struct dim *dim = container_of(work, struct dim, work);
+ struct hns3_enet_ring_group *group = container_of(dim,
+ struct hns3_enet_ring_group, dim);
+ struct hns3_enet_tqp_vector *tqp_vector = group->ring->tqp_vector;
+ struct dim_cq_moder cur_moder =
+ net_dim_get_tx_moderation(dim->mode, dim->profile_ix);
+
+ hns3_set_vector_coalesce_tx_gl(tqp_vector, cur_moder.usec);
+ tqp_vector->tx_group.coal.int_gl = cur_moder.usec;
+
+ if (cur_moder.pkts < tqp_vector->tx_group.coal.int_ql_max) {
+ hns3_set_vector_coalesce_tx_ql(tqp_vector, cur_moder.pkts);
+ tqp_vector->tx_group.coal.int_ql = cur_moder.pkts;
+ }
+
+ dim->state = DIM_START_MEASURE;
+}
+
+static void hns3_nic_init_dim(struct hns3_enet_tqp_vector *tqp_vector)
+{
+ INIT_WORK(&tqp_vector->rx_group.dim.work, hns3_rx_dim_work);
+ tqp_vector->rx_group.dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
+ INIT_WORK(&tqp_vector->tx_group.dim.work, hns3_tx_dim_work);
+ tqp_vector->tx_group.dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
+}
+
static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
{
struct hnae3_ring_chain_node vector_ring_chain;
@@ -3589,6 +3672,7 @@ static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
tqp_vector = &priv->tqp_vector[i];
hns3_vector_coalesce_init_hw(tqp_vector, priv);
tqp_vector->num_tqps = 0;
+ hns3_nic_init_dim(tqp_vector);
}
for (i = 0; i < h->kinfo.num_tqps; i++) {
@@ -4161,6 +4245,7 @@ static int hns3_client_init(struct hnae3_handle *handle)
netdev->max_mtu = HNS3_MAX_MTU;
set_bit(HNS3_NIC_STATE_INITED, &priv->state);
+ set_bit(HNS3_NIC_STATE_DIM_ENABLE, &priv->state);
if (netif_msg_drv(handle))
hns3_info_show(priv);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 8d33652..eb4e7ef 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -4,6 +4,7 @@
#ifndef __HNS3_ENET_H
#define __HNS3_ENET_H
+#include <linux/dim.h>
#include <linux/if_vlan.h>
#include "hnae3.h"
@@ -18,6 +19,7 @@ enum hns3_nic_state {
HNS3_NIC_STATE_SERVICE_INITED,
HNS3_NIC_STATE_SERVICE_SCHED,
HNS3_NIC_STATE2_RESET_REQUESTED,
+ HNS3_NIC_STATE_DIM_ENABLE,
HNS3_NIC_STATE_MAX
};
@@ -449,6 +451,7 @@ struct hns3_enet_ring_group {
u64 total_packets; /* total packets processed this group */
u16 count;
struct hns3_enet_coalesce coal;
+ struct dim dim;
};
struct hns3_enet_tqp_vector {
@@ -471,6 +474,7 @@ struct hns3_enet_tqp_vector {
char name[HNAE3_INT_NAME_LEN];
unsigned long last_jiffies;
+ u64 event_cnt;
} ____cacheline_internodealigned_in_smp;
struct hns3_nic_priv {
--
2.7.4
On Thu, 12 Nov 2020 11:33:14 +0800 Huazhong Tan wrote:
> Add a control private flag in ethtool for enable/disable
> DIM feature.
>
> Signed-off-by: Huazhong Tan <[email protected]>
Please work on a common ethtool API for the configuration instead of
using private flags.
Private flags were overused because the old IOCTL-based ethtool was
hard to extend, but we have a netlink API now.
For example here you're making a choice between device and DIM
implementation of IRQ coalescing. You can add a new netlink attribute
to the ETHTOOL_MSG_COALESCE_GET/ETHTOOL_MSG_COALESCE_SET commands which
controls the type of adaptive coalescing (if enabled).
One question I don't think we have a strong answer for is how to handle
this extension from ethtool_ops point of view. Should we add a new
"extended" op which drivers may start implementing? Or separate the
structure passed in to the ops from the one used as uAPI?
Thoughts anyone?
Huazhong Tan, since the DIM and EQ/CQ patches may require more
infrastructure work feel free to repost the first 4 patches separately,
I can apply those as is.
On 2020/11/15 2:54, Jakub Kicinski wrote:
> On Thu, 12 Nov 2020 11:33:14 +0800 Huazhong Tan wrote:
>> Add a control private flag in ethtool for enable/disable
>> DIM feature.
>>
>> Signed-off-by: Huazhong Tan <[email protected]>
>
> Please work on a common ethtool API for the configuration instead of
> using private flags.
>
> Private flags were overused because the old IOCTL-based ethtool was
> hard to extend, but we have a netlink API now.
>
> For example here you're making a choice between device and DIM
> implementation of IRQ coalescing. You can add a new netlink attribute
> to the ETHTOOL_MSG_COALESCE_GET/ETHTOOL_MSG_COALESCE_SET commands which
> controls the type of adaptive coalescing (if enabled).
>
The device's implementation of IRQ coalescing will be removed, if DIM
works ok for a long time. So could this private flag for DIM be
uptreamed as a transition scheme? And adding a new netlink attrtibute to
controls the type of adaptive coalescing seems useless for other drivers.
>
> One question I don't think we have a strong answer for is how to handle
> this extension from ethtool_ops point of view. Should we add a new
> "extended" op which drivers may start implementing? Or separate the
> structure passed in to the ops from the one used as uAPI?
>
> Thoughts anyone?
>
>
> Huazhong Tan, since the DIM and EQ/CQ patches may require more
> infrastructure work feel free to repost the first 4 patches separately,
> I can apply those as is.
>
ok, thanks.
> .
>
On Mon, 16 Nov 2020 16:41:45 +0800 tanhuazhong wrote:
> On 2020/11/15 2:54, Jakub Kicinski wrote:
> > On Thu, 12 Nov 2020 11:33:14 +0800 Huazhong Tan wrote:
> >> Add a control private flag in ethtool for enable/disable
> >> DIM feature.
> >>
> >> Signed-off-by: Huazhong Tan <[email protected]>
> >
> > Please work on a common ethtool API for the configuration instead of
> > using private flags.
> >
> > Private flags were overused because the old IOCTL-based ethtool was
> > hard to extend, but we have a netlink API now.
> >
> > For example here you're making a choice between device and DIM
> > implementation of IRQ coalescing. You can add a new netlink attribute
> > to the ETHTOOL_MSG_COALESCE_GET/ETHTOOL_MSG_COALESCE_SET commands which
> > controls the type of adaptive coalescing (if enabled).
>
> The device's implementation of IRQ coalescing will be removed, if DIM
> works ok for a long time. So could this private flag for DIM be
> uptreamed as a transition scheme? And adding a new netlink attrtibute to
> controls the type of adaptive coalescing seems useless for other drivers.
The information whether the adaptive behavior is implemented by DIM,
device or custom driver implementation is useful regardless. Right now
users only see "adaptive" and don't know what implements it - device,
DIM or is it a custom implementation in the driver. So regardless if
you remove the priv flag, the "read"/"get" side of the information will
still be useful.
Besides you have another priv flag in this set that needs to be
converted to a generic attribute - the one for the timer reset
behavior.