There are several updates relating to the interrupt coalesce for
the HNS3 ethernet driver.
#1 adds support for QL(quantity limiting, interrupt coalesce
based on the frame quantity).
#2 queries the maximum value of GL from the firmware instead of
a fixed value in code.
#3 adds support for 1us unit GL(gap limiting, interrupt coalesce
based on the gap time).
#4 renames gl_adapt_enable in struct hns3_enet_coalesce to fit
its new usage.
change log:
V4 - remove #5~#10 from this series, which needs more discussion.
V3 - fix a typo error in #1 reported by Jakub Kicinski.
rewrite #9 commit log.
remove #11 from this series.
V2 - reorder #2 & #3 to fix compiler error.
fix some checkpatch warnings in #10 & #11.
previous version:
V3: https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
V2: https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
V1: https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
Huazhong Tan (4):
net: hns3: add support for configuring interrupt quantity limiting
net: hns3: add support for querying maximum value of GL
net: hns3: add support for 1us unit GL configuration
net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesce
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 99 ++++++++++++++++------
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 17 +++-
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 71 +++++++++++++---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 8 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 ++
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h | 8 ++
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 7 ++
9 files changed, 182 insertions(+), 37 deletions(-)
--
2.7.4
For device whose version is above V3(include V3), the GL
configuration can set as 1us unit, so adds support for
configuring this field.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 26 ++++++++++++++++++----
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 +++++
3 files changed, 31 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 6e08719..2813fe5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -224,17 +224,27 @@ void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
void hns3_set_vector_coalesce_rx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value)
{
- u32 rx_gl_reg = hns3_gl_usec_to_reg(gl_value);
+ u32 new_val;
- writel(rx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL0_OFFSET);
+ if (tqp_vector->rx_group.coal.unit_1us)
+ new_val = gl_value | HNS3_INT_GL_1US;
+ else
+ new_val = hns3_gl_usec_to_reg(gl_value);
+
+ writel(new_val, tqp_vector->mask_addr + HNS3_VECTOR_GL0_OFFSET);
}
void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value)
{
- u32 tx_gl_reg = hns3_gl_usec_to_reg(gl_value);
+ u32 new_val;
+
+ if (tqp_vector->tx_group.coal.unit_1us)
+ new_val = gl_value | HNS3_INT_GL_1US;
+ else
+ new_val = hns3_gl_usec_to_reg(gl_value);
- writel(tx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
+ writel(new_val, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
}
void hns3_set_vector_coalesce_tx_ql(struct hns3_enet_tqp_vector *tqp_vector,
@@ -272,6 +282,14 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
rx_coal->flow_level = HNS3_FLOW_LOW;
tx_coal->flow_level = HNS3_FLOW_LOW;
+ /* device version above V3(include V3), GL can configure 1us
+ * unit, so uses 1us unit.
+ */
+ if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3) {
+ tx_coal->unit_1us = 1;
+ rx_coal->unit_1us = 1;
+ }
+
if (ae_dev->dev_specs.int_ql_max) {
tx_coal->ql_enable = 1;
rx_coal->ql_enable = 1;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index be099dd..4651ad1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -425,6 +425,8 @@ enum hns3_flow_level_range {
#define HNS3_INT_GL_18K 0x0036
#define HNS3_INT_GL_8K 0x007C
+#define HNS3_INT_GL_1US BIT(31)
+
#define HNS3_INT_RL_MAX 0x00EC
#define HNS3_INT_RL_ENABLE_MASK 0x40
@@ -436,6 +438,7 @@ struct hns3_enet_coalesce {
u16 int_ql_max;
u8 gl_adapt_enable:1;
u8 ql_enable:1;
+ u8 unit_1us:1;
enum hns3_flow_level_range flow_level;
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 49d3061..09aa608 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1148,6 +1148,12 @@ static int hns3_check_gl_coalesce_para(struct net_device *netdev,
return -EINVAL;
}
+ /* device version above V3(include V3), GL uses 1us unit,
+ * so the round down is not needed.
+ */
+ if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3)
+ return 0;
+
rx_gl = hns3_gl_round_down(cmd->rx_coalesce_usecs);
if (rx_gl != cmd->rx_coalesce_usecs) {
netdev_info(netdev,
--
2.7.4
QL(quantity limiting) means that hardware supports the interrupt
coalesce based on the frame quantity. QL can be configured when
int_ql_max in device's specification is non-zero, so add support
to configure it. Also, rename two coalesce init function to fit
their purpose.
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 65 ++++++++++++++++------
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 13 ++++-
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 43 +++++++++++++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 1 +
5 files changed, 105 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index a362516..6e08719 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -237,35 +237,68 @@ void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
writel(tx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
}
-static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector,
- struct hns3_nic_priv *priv)
+void hns3_set_vector_coalesce_tx_ql(struct hns3_enet_tqp_vector *tqp_vector,
+ u32 ql_value)
{
+ writel(ql_value, tqp_vector->mask_addr + HNS3_VECTOR_TX_QL_OFFSET);
+}
+
+void hns3_set_vector_coalesce_rx_ql(struct hns3_enet_tqp_vector *tqp_vector,
+ u32 ql_value)
+{
+ writel(ql_value, tqp_vector->mask_addr + HNS3_VECTOR_RX_QL_OFFSET);
+}
+
+static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
+ struct hns3_nic_priv *priv)
+{
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(priv->ae_handle->pdev);
+ struct hns3_enet_coalesce *tx_coal = &tqp_vector->tx_group.coal;
+ struct hns3_enet_coalesce *rx_coal = &tqp_vector->rx_group.coal;
+
/* initialize the configuration for interrupt coalescing.
* 1. GL (Interrupt Gap Limiter)
* 2. RL (Interrupt Rate Limiter)
+ * 3. QL (Interrupt Quantity Limiter)
*
* Default: enable interrupt coalescing self-adaptive and GL
*/
- tqp_vector->tx_group.coal.gl_adapt_enable = 1;
- tqp_vector->rx_group.coal.gl_adapt_enable = 1;
+ tx_coal->gl_adapt_enable = 1;
+ rx_coal->gl_adapt_enable = 1;
+
+ tx_coal->int_gl = HNS3_INT_GL_50K;
+ rx_coal->int_gl = HNS3_INT_GL_50K;
- tqp_vector->tx_group.coal.int_gl = HNS3_INT_GL_50K;
- tqp_vector->rx_group.coal.int_gl = HNS3_INT_GL_50K;
+ rx_coal->flow_level = HNS3_FLOW_LOW;
+ tx_coal->flow_level = HNS3_FLOW_LOW;
- tqp_vector->rx_group.coal.flow_level = HNS3_FLOW_LOW;
- tqp_vector->tx_group.coal.flow_level = HNS3_FLOW_LOW;
+ if (ae_dev->dev_specs.int_ql_max) {
+ tx_coal->ql_enable = 1;
+ rx_coal->ql_enable = 1;
+ tx_coal->int_ql_max = ae_dev->dev_specs.int_ql_max;
+ rx_coal->int_ql_max = ae_dev->dev_specs.int_ql_max;
+ tx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ rx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ }
}
-static void hns3_vector_gl_rl_init_hw(struct hns3_enet_tqp_vector *tqp_vector,
- struct hns3_nic_priv *priv)
+static void
+hns3_vector_coalesce_init_hw(struct hns3_enet_tqp_vector *tqp_vector,
+ struct hns3_nic_priv *priv)
{
+ struct hns3_enet_coalesce *tx_coal = &tqp_vector->tx_group.coal;
+ struct hns3_enet_coalesce *rx_coal = &tqp_vector->rx_group.coal;
struct hnae3_handle *h = priv->ae_handle;
- hns3_set_vector_coalesce_tx_gl(tqp_vector,
- tqp_vector->tx_group.coal.int_gl);
- hns3_set_vector_coalesce_rx_gl(tqp_vector,
- tqp_vector->rx_group.coal.int_gl);
+ hns3_set_vector_coalesce_tx_gl(tqp_vector, tx_coal->int_gl);
+ hns3_set_vector_coalesce_rx_gl(tqp_vector, rx_coal->int_gl);
hns3_set_vector_coalesce_rl(tqp_vector, h->kinfo.int_rl_setting);
+
+ if (tx_coal->ql_enable)
+ hns3_set_vector_coalesce_tx_ql(tqp_vector, tx_coal->int_ql);
+
+ if (rx_coal->ql_enable)
+ hns3_set_vector_coalesce_rx_ql(tqp_vector, rx_coal->int_ql);
}
static int hns3_nic_set_real_num_queue(struct net_device *netdev)
@@ -3536,7 +3569,7 @@ static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
for (i = 0; i < priv->vector_num; i++) {
tqp_vector = &priv->tqp_vector[i];
- hns3_vector_gl_rl_init_hw(tqp_vector, priv);
+ hns3_vector_coalesce_init_hw(tqp_vector, priv);
tqp_vector->num_tqps = 0;
}
@@ -3632,7 +3665,7 @@ static int hns3_nic_alloc_vector_data(struct hns3_nic_priv *priv)
tqp_vector->idx = i;
tqp_vector->mask_addr = vector[i].io_addr;
tqp_vector->vector_irq = vector[i].vector;
- hns3_vector_gl_rl_init(tqp_vector, priv);
+ hns3_vector_coalesce_init(tqp_vector, priv);
}
out:
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 1c81dea..10990bd 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -181,6 +181,8 @@ enum hns3_nic_state {
#define HNS3_VECTOR_GL2_OFFSET 0x300
#define HNS3_VECTOR_RL_OFFSET 0x900
#define HNS3_VECTOR_RL_EN_B 6
+#define HNS3_VECTOR_TX_QL_OFFSET 0xe00
+#define HNS3_VECTOR_RX_QL_OFFSET 0xf00
#define HNS3_RING_EN_B 0
@@ -427,9 +429,14 @@ enum hns3_flow_level_range {
#define HNS3_INT_RL_MAX 0x00EC
#define HNS3_INT_RL_ENABLE_MASK 0x40
+#define HNS3_INT_QL_DEFAULT_CFG 0x20
+
struct hns3_enet_coalesce {
u16 int_gl;
- u8 gl_adapt_enable;
+ u16 int_ql;
+ u16 int_ql_max;
+ u8 gl_adapt_enable:1;
+ u8 ql_enable:1;
enum hns3_flow_level_range flow_level;
};
@@ -595,6 +602,10 @@ void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value);
void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
u32 rl_value);
+void hns3_set_vector_coalesce_rx_ql(struct hns3_enet_tqp_vector *tqp_vector,
+ u32 ql_value);
+void hns3_set_vector_coalesce_tx_ql(struct hns3_enet_tqp_vector *tqp_vector,
+ u32 ql_value);
void hns3_enable_vlan_filter(struct net_device *netdev, bool enable);
void hns3_request_update_promisc_mode(struct hnae3_handle *handle);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 6b07b27..ec8f4ca 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1115,6 +1115,9 @@ static int hns3_get_coalesce_per_queue(struct net_device *netdev, u32 queue,
cmd->tx_coalesce_usecs_high = h->kinfo.int_rl_setting;
cmd->rx_coalesce_usecs_high = h->kinfo.int_rl_setting;
+ cmd->tx_max_coalesced_frames = tx_vector->tx_group.coal.int_ql;
+ cmd->rx_max_coalesced_frames = rx_vector->rx_group.coal.int_ql;
+
return 0;
}
@@ -1188,6 +1191,29 @@ static int hns3_check_rl_coalesce_para(struct net_device *netdev,
return 0;
}
+static int hns3_check_ql_coalesce_param(struct net_device *netdev,
+ struct ethtool_coalesce *cmd)
+{
+ struct hnae3_handle *handle = hns3_get_handle(netdev);
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(handle->pdev);
+
+ if ((cmd->tx_max_coalesced_frames || cmd->rx_max_coalesced_frames) &&
+ !ae_dev->dev_specs.int_ql_max) {
+ netdev_err(netdev, "coalesced frames is not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (cmd->tx_max_coalesced_frames > ae_dev->dev_specs.int_ql_max ||
+ cmd->rx_max_coalesced_frames > ae_dev->dev_specs.int_ql_max) {
+ netdev_err(netdev,
+ "invalid coalesced_frames value, range is 0-%u\n",
+ ae_dev->dev_specs.int_ql_max);
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
static int hns3_check_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
@@ -1207,6 +1233,10 @@ static int hns3_check_coalesce_para(struct net_device *netdev,
return ret;
}
+ ret = hns3_check_ql_coalesce_param(netdev, cmd);
+ if (ret)
+ return ret;
+
if (cmd->use_adaptive_tx_coalesce == 1 ||
cmd->use_adaptive_rx_coalesce == 1) {
netdev_info(netdev,
@@ -1238,6 +1268,9 @@ static void hns3_set_coalesce_per_queue(struct net_device *netdev,
tx_vector->tx_group.coal.int_gl = cmd->tx_coalesce_usecs;
rx_vector->rx_group.coal.int_gl = cmd->rx_coalesce_usecs;
+ tx_vector->tx_group.coal.int_ql = cmd->tx_max_coalesced_frames;
+ rx_vector->rx_group.coal.int_ql = cmd->rx_max_coalesced_frames;
+
hns3_set_vector_coalesce_tx_gl(tx_vector,
tx_vector->tx_group.coal.int_gl);
hns3_set_vector_coalesce_rx_gl(rx_vector,
@@ -1245,6 +1278,13 @@ static void hns3_set_coalesce_per_queue(struct net_device *netdev,
hns3_set_vector_coalesce_rl(tx_vector, h->kinfo.int_rl_setting);
hns3_set_vector_coalesce_rl(rx_vector, h->kinfo.int_rl_setting);
+
+ if (tx_vector->tx_group.coal.ql_enable)
+ hns3_set_vector_coalesce_tx_ql(tx_vector,
+ tx_vector->tx_group.coal.int_ql);
+ if (rx_vector->rx_group.coal.ql_enable)
+ hns3_set_vector_coalesce_rx_ql(rx_vector,
+ rx_vector->rx_group.coal.int_ql);
}
static int hns3_set_coalesce(struct net_device *netdev,
@@ -1471,7 +1511,8 @@ static int hns3_get_module_eeprom(struct net_device *netdev,
#define HNS3_ETHTOOL_COALESCE (ETHTOOL_COALESCE_USECS | \
ETHTOOL_COALESCE_USE_ADAPTIVE | \
ETHTOOL_COALESCE_RX_USECS_HIGH | \
- ETHTOOL_COALESCE_TX_USECS_HIGH)
+ ETHTOOL_COALESCE_TX_USECS_HIGH | \
+ ETHTOOL_COALESCE_MAX_FRAMES)
static const struct ethtool_ops hns3vf_ethtool_ops = {
.supported_coalesce_params = HNS3_ETHTOOL_COALESCE,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 1f02640..8bcdb28 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1379,6 +1379,7 @@ static void hclge_parse_dev_specs(struct hclge_dev *hdev,
ae_dev->dev_specs.max_non_tso_bd_num = req0->max_non_tso_bd_num;
ae_dev->dev_specs.rss_ind_tbl_size =
le16_to_cpu(req0->rss_ind_tbl_size);
+ ae_dev->dev_specs.int_ql_max = le16_to_cpu(req0->int_ql_max);
ae_dev->dev_specs.rss_key_size = le16_to_cpu(req0->rss_key_size);
ae_dev->dev_specs.max_tm_rate = le32_to_cpu(req0->max_tm_rate);
}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index c8e3fdd..8209be9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -3004,6 +3004,7 @@ static void hclgevf_parse_dev_specs(struct hclgevf_dev *hdev,
ae_dev->dev_specs.max_non_tso_bd_num = req0->max_non_tso_bd_num;
ae_dev->dev_specs.rss_ind_tbl_size =
le16_to_cpu(req0->rss_ind_tbl_size);
+ ae_dev->dev_specs.int_ql_max = le16_to_cpu(req0->int_ql_max);
ae_dev->dev_specs.rss_key_size = le16_to_cpu(req0->rss_key_size);
}
--
2.7.4
On Mon, 16 Nov 2020 16:20:50 +0800 Huazhong Tan wrote:
> There are several updates relating to the interrupt coalesce for
> the HNS3 ethernet driver.
>
> #1 adds support for QL(quantity limiting, interrupt coalesce
> based on the frame quantity).
> #2 queries the maximum value of GL from the firmware instead of
> a fixed value in code.
> #3 adds support for 1us unit GL(gap limiting, interrupt coalesce
> based on the gap time).
> #4 renames gl_adapt_enable in struct hns3_enet_coalesce to fit
> its new usage.
>
> change log:
> V4 - remove #5~#10 from this series, which needs more discussion.
> V3 - fix a typo error in #1 reported by Jakub Kicinski.
> rewrite #9 commit log.
> remove #11 from this series.
> V2 - reorder #2 & #3 to fix compiler error.
> fix some checkpatch warnings in #10 & #11.
Applied, thanks!
Huazhong Tan wrote:
> There are several updates relating to the interrupt coalesce for
> the HNS3 ethernet driver.
>
> #1 adds support for QL(quantity limiting, interrupt coalesce
> based on the frame quantity).
> #2 queries the maximum value of GL from the firmware instead of
> a fixed value in code.
> #3 adds support for 1us unit GL(gap limiting, interrupt coalesce
> based on the gap time).
> #4 renames gl_adapt_enable in struct hns3_enet_coalesce to fit
> its new usage.
>
> change log:
> V4 - remove #5~#10 from this series, which needs more discussion.
> V3 - fix a typo error in #1 reported by Jakub Kicinski.
> rewrite #9 commit log.
> remove #11 from this series.
> V2 - reorder #2 & #3 to fix compiler error.
> fix some checkpatch warnings in #10 & #11.
For the series:
Reviewed-by: Jesse Brandeburg <[email protected]>