This patch series add MT6360 LED support contains driver and binding document
Gene Chen (2)
dt-bindings: leds: Add bindings for MT6360 LED
leds: mt6360: Add LED driver for MT6360
Documentation/devicetree/bindings/leds/leds-mt6360.yaml | 95 +
drivers/leds/Kconfig | 12
drivers/leds/Makefile | 1
drivers/leds/leds-mt6360.c | 783 ++++++++++++++++
4 files changed, 891 insertions(+)
changelogs between v1 & v2
- add led driver with mfd
changelogs between v2 & v3
- independent add led driver
- add dt-binding document
- refactor macros definition for easy to debug
- parse device tree by fwnode
- use devm*ext to register led class device
changelogs between v3 & v4
- fix binding document description
- use GENMASK and add unit postfix to definition
- isink register led class device
changelogs between v4 & v5
- change rgb isink to multicolor control
- add binding reference to mfd yaml
changelogs between v5 & v6
- Use DT to decide RGB LED is multicolor device or indicator device only
From: Gene Chen <[email protected]>
Add bindings document for LED support on MT6360 PMIC
Signed-off-by: Gene Chen <[email protected]>
---
.../devicetree/bindings/leds/leds-mt6360.yaml | 114 +++++++++++++++++++++
1 file changed, 114 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6360.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
new file mode 100644
index 0000000..871db4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+ - Gene Chen <[email protected]>
+
+description: |
+ This module is part of the MT6360 MFD device.
+ see Documentation/devicetree/bindings/mfd/mt6360.yaml
+ Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+ and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+ compatible:
+ const: mediatek,mt6360-led
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-6]$":
+ type: object
+ $ref: common.yaml#
+ description:
+ Properties for a single LED.
+
+ properties:
+ reg:
+ description: Index of the LED.
+ enum:
+ - 0 # LED output INDICATOR1_RED
+ - 1 # LED output INDICATOR1_GREEN
+ - 2 # LED output INDICATOR1_BLUE
+ - 3 # LED output INDICATOR2_ML
+ - 4 # LED output FLED1
+ - 5 # LED output FLED2
+ - 6 # LED output MULTICOLOR
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+ led-controller {
+ compatible = "mediatek,mt6360-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ led-max-microamp = <24000>;
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_AMBER>;
+ led-max-microamp = <150000>;
+ };
+ led@4 {
+ reg = <4>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@5 {
+ reg = <5>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@6 {
+ reg = <6>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_MULTI>;
+ led-max-microamp = <24000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+...
--
2.7.4
From: Gene Chen <[email protected]>
Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
moonlight LED.
Signed-off-by: Gene Chen <[email protected]>
---
drivers/leds/Kconfig | 13 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6360.c | 817 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 831 insertions(+)
create mode 100644 drivers/leds/leds-mt6360.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 1c181df..4f533bc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -271,6 +271,19 @@ config LEDS_MT6323
This option enables support for on-chip LED drivers found on
Mediatek MT6323 PMIC.
+config LEDS_MT6360
+ tristate "LED Support for Mediatek MT6360 PMIC"
+ depends on LEDS_CLASS && OF
+ depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH
+ depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
+ depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+ depends on MFD_MT6360
+ help
+ This option enables support for dual Flash LED drivers found on
+ Mediatek MT6360 PMIC.
+ Independent current sources supply for each flash LED support torch
+ and strobe mode.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index c2c7d7a..5596427 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
+obj-$(CONFIG_LEDS_MT6360) += leds-mt6360.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
diff --git a/drivers/leds/leds-mt6360.c b/drivers/leds/leds-mt6360.c
new file mode 100644
index 0000000..e3a30bd
--- /dev/null
+++ b/drivers/leds/leds-mt6360.c
@@ -0,0 +1,817 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/led-class-flash.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <media/v4l2-flash-led-class.h>
+
+enum {
+ MT6360_LED_ISNK1 = 0,
+ MT6360_LED_ISNK2,
+ MT6360_LED_ISNK3,
+ MT6360_LED_ISNKML,
+ MT6360_LED_FLASH1,
+ MT6360_LED_FLASH2,
+ MT6360_LED_MULTICOLOR,
+ MT6360_MAX_LEDS = MT6360_LED_MULTICOLOR
+};
+
+#define MT6360_REG_RGBEN 0x380
+#define MT6360_REG_ISNK(_led_no) (0x381 + (_led_no))
+#define MT6360_ISNK_ENMASK(_led_no) BIT(7 - (_led_no))
+#define MT6360_ISNK_MASK GENMASK(4, 0)
+#define MT6360_CHRINDSEL_MASK BIT(3)
+
+#define MULTICOLOR_NUM_CHANNELS 3
+
+#define MT6360_REG_FLEDEN 0x37E
+#define MT6360_REG_STRBTO 0x373
+#define MT6360_REG_FLEDBASE(_id) (0x372 + 4 * (_id - MT6360_LED_FLASH1))
+#define MT6360_REG_FLEDISTRB(_id) (MT6360_REG_FLEDBASE(_id) + 2)
+#define MT6360_REG_FLEDITOR(_id) (MT6360_REG_FLEDBASE(_id) + 3)
+#define MT6360_REG_CHGSTAT2 0x3E1
+#define MT6360_REG_FLEDSTAT1 0x3E9
+#define MT6360_ITORCH_MASK GENMASK(4, 0)
+#define MT6360_ISTROBE_MASK GENMASK(6, 0)
+#define MT6360_STRBTO_MASK GENMASK(6, 0)
+#define MT6360_TORCHEN_MASK BIT(3)
+#define MT6360_STROBEN_MASK BIT(2)
+#define MT6360_FLCSEN_MASK(_id) BIT(MT6360_LED_FLASH2 - _id)
+#define MT6360_FLEDCHGVINOVP_MASK BIT(3)
+#define MT6360_FLED1STRBTO_MASK BIT(11)
+#define MT6360_FLED2STRBTO_MASK BIT(10)
+#define MT6360_FLED1STRB_MASK BIT(9)
+#define MT6360_FLED2STRB_MASK BIT(8)
+#define MT6360_FLED1SHORT_MASK BIT(7)
+#define MT6360_FLED2SHORT_MASK BIT(6)
+#define MT6360_FLEDLVF_MASK BIT(3)
+
+#define MT6360_ISNKRGB_STEPUA 2000
+#define MT6360_ISNKRGB_MAXUA 24000
+#define MT6360_ISNKML_STEPUA 5000
+#define MT6360_ISNKML_MAXUA 150000
+
+#define MT6360_ITORCH_MINUA 25000
+#define MT6360_ITORCH_STEPUA 12500
+#define MT6360_ITORCH_MAXUA 400000
+#define MT6360_ISTRB_MINUA 50000
+#define MT6360_ISTRB_STEPUA 12500
+#define MT6360_ISTRB_MAXUA 1500000
+#define MT6360_STRBTO_MINUS 64000
+#define MT6360_STRBTO_STEPUS 32000
+#define MT6360_STRBTO_MAXUS 2432000
+
+#define STATE_OFF 0
+#define STATE_KEEP 1
+#define STATE_ON 2
+
+struct mt6360_led {
+ union {
+ struct led_classdev isnk;
+ struct led_classdev_mc mc;
+ struct led_classdev_flash flash;
+ };
+ struct v4l2_flash *v4l2_flash;
+ struct mt6360_priv *priv;
+ u32 led_no;
+ u32 default_state;
+};
+
+struct mt6360_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct mutex lock;
+ unsigned int fled_strobe_used;
+ unsigned int fled_torch_used;
+ unsigned int leds_active;
+ unsigned int leds_count;
+ struct mt6360_led leds[];
+};
+
+static int mt6360_mc_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
+{
+ struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+ struct mt6360_led *led = container_of(mccdev, struct mt6360_led, mc);
+ struct mt6360_priv *priv = led->priv;
+ u32 real_bright, enable_mask = 0, enable = 0;
+ int i, ret;
+
+ mutex_lock(&priv->lock);
+
+ led_mc_calc_color_components(mccdev, level);
+
+ for (i = 0; i < mccdev->num_colors; i++) {
+ struct mc_subled *subled = mccdev->subled_info + i;
+
+ real_bright = min(lcdev->max_brightness, subled->brightness);
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_ISNK(i), MT6360_ISNK_MASK,
+ real_bright);
+ if (ret)
+ goto out;
+
+ enable_mask |= MT6360_ISNK_ENMASK(subled->channel);
+ if (real_bright)
+ enable |= MT6360_ISNK_ENMASK(subled->channel);
+ }
+
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, enable_mask, enable);
+
+out:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int mt6360_isnk_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
+{
+ struct mt6360_led *led = container_of(lcdev, struct mt6360_led, isnk);
+ struct mt6360_priv *priv = led->priv;
+ u32 enable_mask = MT6360_ISNK_ENMASK(led->led_no);
+ u32 val = level ? MT6360_ISNK_ENMASK(led->led_no) : 0;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_ISNK(led->led_no), MT6360_ISNK_MASK,
+ level);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, enable_mask, val);
+
+out:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int mt6360_torch_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
+{
+ struct mt6360_led *led = container_of(lcdev, struct mt6360_led, flash.led_cdev);
+ struct mt6360_priv *priv = led->priv;
+ u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
+ u32 val = level ? MT6360_FLCSEN_MASK(led->led_no) : 0;
+ u32 prev = priv->fled_torch_used, curr;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ /* Only one set of flash control logic, use the flag to avoid strobe is currently used */
+ if (priv->fled_strobe_used) {
+ dev_warn(lcdev->dev, "Please disable strobe first [%d]\n", priv->fled_strobe_used);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (level)
+ curr = prev | BIT(led->led_no);
+ else
+ curr = prev & ~BIT(led->led_no);
+
+ if (curr)
+ val |= MT6360_TORCHEN_MASK;
+
+ if (level) {
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDITOR(led->led_no),
+ MT6360_ITORCH_MASK, level - 1);
+ if (ret)
+ goto out;
+ }
+
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, enable_mask, val);
+ if (ret)
+ goto out;
+
+ priv->fled_torch_used = curr;
+
+out:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int mt6360_flash_brightness_set(struct led_classdev_flash *fl_cdev, u32 brightness)
+{
+ /*
+ * Due to the current spike when turning on flash, let brightness to be kept by framework.
+ * This empty function is used to prevent led_classdev_flash register ops check failure.
+ */
+ return 0;
+}
+
+static int _mt6360_flash_brightness_set(struct led_classdev_flash *fl_cdev, u32 brightness)
+{
+ struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
+ struct mt6360_priv *priv = led->priv;
+ struct led_flash_setting *s = &fl_cdev->brightness;
+ u32 val = (brightness - s->min) / s->step;
+
+ return regmap_update_bits(priv->regmap, MT6360_REG_FLEDISTRB(led->led_no),
+ MT6360_ISTROBE_MASK, val);
+}
+
+static int mt6360_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
+{
+ struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
+ struct mt6360_priv *priv = led->priv;
+ struct led_classdev *lcdev = &fl_cdev->led_cdev;
+ struct led_flash_setting *s = &fl_cdev->brightness;
+ u32 enable_mask = MT6360_STROBEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
+ u32 val = state ? MT6360_FLCSEN_MASK(led->led_no) : 0;
+ u32 prev = priv->fled_strobe_used, curr;
+ int ret;
+
+ /* Only one set of flash control logic, use the flag to avoid torch is currently used */
+ if (priv->fled_torch_used) {
+ dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n", priv->fled_torch_used);
+ return -EBUSY;
+ }
+
+ if (state)
+ curr = prev | BIT(led->led_no);
+ else
+ curr = prev & ~BIT(led->led_no);
+
+ if (curr)
+ val |= MT6360_STROBEN_MASK;
+
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, enable_mask, val);
+ if (ret) {
+ dev_err(lcdev->dev, "[%d] control current source %d fail\n", led->led_no, state);
+ return ret;
+ }
+
+ /*
+ * If the flash need to be on, config the flash current ramping up to the setting value
+ * Else, always recover back to the minimum one
+ */
+ ret = _mt6360_flash_brightness_set(fl_cdev, state ? s->val : s->min);
+ if (ret)
+ return ret;
+
+ /* For the flash turn on/off, HW rampping up/down time is 5ms/500us, respectively */
+ if (!prev && curr)
+ usleep_range(5000, 6000);
+ else if (prev && !curr)
+ udelay(500);
+
+ priv->fled_strobe_used = curr;
+ return 0;
+}
+
+static int mt6360_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
+{
+ struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
+ struct mt6360_priv *priv = led->priv;
+
+ *state = !!(priv->fled_strobe_used & BIT(led->led_no));
+ return 0;
+}
+
+static int mt6360_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
+{
+ struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
+ struct mt6360_priv *priv = led->priv;
+ struct led_flash_setting *s = &fl_cdev->timeout;
+ u32 val = (timeout - s->min) / s->step;
+
+ return regmap_update_bits(priv->regmap, MT6360_REG_STRBTO, MT6360_STRBTO_MASK, val);
+
+}
+
+static int mt6360_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
+{
+ struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
+ struct mt6360_priv *priv = led->priv;
+ u16 fled_stat;
+ unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
+ u32 rfault = 0;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MT6360_REG_CHGSTAT2, &chg_stat);
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_read(priv->regmap, MT6360_REG_FLEDSTAT1, &fled_stat, sizeof(fled_stat));
+ if (ret)
+ return ret;
+
+ if (led->led_no == MT6360_LED_FLASH1) {
+ strobe_timeout_mask = MT6360_FLED1STRBTO_MASK;
+ fled_short_mask = MT6360_FLED1SHORT_MASK;
+ } else {
+ strobe_timeout_mask = MT6360_FLED2STRBTO_MASK;
+ fled_short_mask = MT6360_FLED2SHORT_MASK;
+ }
+
+ if (chg_stat & MT6360_FLEDCHGVINOVP_MASK)
+ rfault |= LED_FAULT_INPUT_VOLTAGE;
+
+ if (fled_stat & strobe_timeout_mask)
+ rfault |= LED_FAULT_TIMEOUT;
+
+ if (fled_stat & fled_short_mask)
+ rfault |= LED_FAULT_SHORT_CIRCUIT;
+
+ if (fled_stat & MT6360_FLEDLVF_MASK)
+ rfault |= LED_FAULT_UNDER_VOLTAGE;
+
+ *fault = rfault;
+ return 0;
+}
+
+static const struct led_flash_ops mt6360_flash_ops = {
+ .flash_brightness_set = mt6360_flash_brightness_set,
+ .strobe_set = mt6360_strobe_set,
+ .strobe_get = mt6360_strobe_get,
+ .timeout_set = mt6360_timeout_set,
+ .fault_get = mt6360_fault_get,
+};
+
+static int mt6360_isnk_init_default_state(struct mt6360_led *led)
+{
+ struct mt6360_priv *priv = led->priv;
+ unsigned int regval;
+ u32 level;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MT6360_REG_ISNK(led->led_no), ®val);
+ if (ret)
+ return ret;
+ level = regval & MT6360_ISNK_MASK;
+
+ ret = regmap_read(priv->regmap, MT6360_REG_RGBEN, ®val);
+ if (ret)
+ return ret;
+
+ if (!(regval & MT6360_ISNK_ENMASK(led->led_no)))
+ level = LED_OFF;
+
+ switch (led->default_state) {
+ case STATE_ON:
+ led->isnk.brightness = led->isnk.max_brightness;
+ break;
+ case STATE_KEEP:
+ led->isnk.brightness = min(level, led->isnk.max_brightness);
+ break;
+ default:
+ led->isnk.brightness = LED_OFF;
+ }
+
+ return mt6360_isnk_brightness_set(&led->isnk, led->isnk.brightness);
+}
+
+static int mt6360_flash_init_default_state(struct mt6360_led *led)
+{
+ struct led_classdev_flash *flash = &led->flash;
+ struct mt6360_priv *priv = led->priv;
+ u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
+ u32 level;
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MT6360_REG_FLEDITOR(led->led_no), ®val);
+ if (ret)
+ return ret;
+ level = regval & MT6360_ITORCH_MASK;
+
+ ret = regmap_read(priv->regmap, MT6360_REG_FLEDEN, ®val);
+ if (ret)
+ return ret;
+
+ if ((regval & enable_mask) == enable_mask)
+ level += 1;
+ else
+ level = LED_OFF;
+
+ switch (led->default_state) {
+ case STATE_ON:
+ flash->led_cdev.brightness = flash->led_cdev.max_brightness;
+ break;
+ case STATE_KEEP:
+ flash->led_cdev.brightness = min(level, flash->led_cdev.max_brightness);
+ break;
+ default:
+ flash->led_cdev.brightness = LED_OFF;
+ }
+
+ return mt6360_torch_brightness_set(&flash->led_cdev, flash->led_cdev.brightness);
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int mt6360_flash_external_strobe_set(struct v4l2_flash *v4l2_flash, bool enable)
+{
+ struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+ struct mt6360_led *led = container_of(flash, struct mt6360_led, flash);
+ struct mt6360_priv *priv = led->priv;
+ u32 mask = MT6360_FLCSEN_MASK(led->led_no);
+ u32 val = enable ? mask : 0;
+ int ret;
+
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, mask, val);
+ if (ret)
+ return ret;
+
+ if (enable)
+ priv->fled_strobe_used |= BIT(led->led_no);
+ else
+ priv->fled_strobe_used &= ~BIT(led->led_no);
+
+ return 0;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+ .external_strobe_set = mt6360_flash_external_strobe_set,
+};
+
+static void mt6360_init_v4l2_config(struct mt6360_led *led, struct v4l2_flash_config *config)
+{
+ struct led_classdev *lcdev;
+ struct led_flash_setting *s = &config->intensity;
+
+ if (led->led_no == MT6360_LED_MULTICOLOR ||
+ (led->led_no >= MT6360_LED_ISNK1 && led->led_no <= MT6360_LED_ISNKML)) {
+ if (led->led_no != MT6360_LED_MULTICOLOR)
+ lcdev = &led->isnk;
+ else
+ lcdev = &led->mc.led_cdev;
+
+ s->step = MT6360_ISNKRGB_STEPUA;
+
+ if (led->led_no == MT6360_LED_ISNKML)
+ s->step = MT6360_ISNKML_STEPUA;
+
+ s->min = 0;
+ s->val = lcdev->brightness * s->step;
+ s->max = lcdev->max_brightness * s->step;
+ } else {
+ lcdev = &led->flash.led_cdev;
+
+ s->min = MT6360_ITORCH_MINUA;
+ s->step = MT6360_ITORCH_STEPUA;
+ s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
+
+ config->has_external_strobe = 1;
+ }
+
+ strscpy(config->dev_name, lcdev->dev->kobj.name, sizeof(config->dev_name));
+}
+#else
+static const struct v4l2_flash_ops v4l2_flash_ops;
+
+static void mt6360_init_v4l2_config(struct mt6360_led *led, struct v4l2_flash_config *config)
+{
+}
+#endif
+
+static int mt6360_led_register(struct device *parent, struct mt6360_led *led,
+ struct led_init_data *init_data)
+{
+ struct mt6360_priv *priv = led->priv;
+ struct v4l2_flash_config v4l2_config = {0};
+ int ret;
+
+ if ((led->led_no == MT6360_LED_ISNK1 || led->led_no == MT6360_LED_MULTICOLOR) &&
+ (priv->leds_active & BIT(MT6360_LED_ISNK1))) {
+ /* Change isink1 to SW control mode, disconnect it with charger state */
+ ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, MT6360_CHRINDSEL_MASK,
+ MT6360_CHRINDSEL_MASK);
+ if (ret) {
+ dev_err(parent, "Failed to config ISNK1 to SW mode\n");
+ return ret;
+ }
+ }
+
+ switch (led->led_no) {
+ case MT6360_LED_MULTICOLOR:
+ ret = mt6360_mc_brightness_set(&led->mc.led_cdev, LED_OFF);
+ if (ret) {
+ dev_err(parent, "Failed to init multicolor brightness\n");
+ return ret;
+ }
+
+ ret = devm_led_classdev_multicolor_register_ext(parent, &led->mc, init_data);
+ if (ret) {
+ dev_err(parent, "Couldn't register multicolor\n");
+ return ret;
+ }
+
+ mt6360_init_v4l2_config(led, &v4l2_config);
+ led->v4l2_flash = v4l2_flash_indicator_init(parent, init_data->fwnode,
+ &led->mc.led_cdev, &v4l2_config);
+ break;
+ case MT6360_LED_ISNK1 ... MT6360_LED_ISNKML:
+ ret = mt6360_isnk_init_default_state(led);
+ if (ret) {
+ dev_err(parent, "Failed to init %d isnk state\n", led->led_no);
+ return ret;
+ }
+
+ ret = devm_led_classdev_register_ext(parent, &led->isnk, init_data);
+ if (ret) {
+ dev_err(parent, "Couldn't register isink %d\n", led->led_no);
+ return ret;
+ }
+
+ mt6360_init_v4l2_config(led, &v4l2_config);
+ led->v4l2_flash = v4l2_flash_indicator_init(parent, init_data->fwnode, &led->isnk,
+ &v4l2_config);
+ break;
+ default:
+ ret = mt6360_flash_init_default_state(led);
+ if (ret) {
+ dev_err(parent, "Failed to init %d flash state\n", led->led_no);
+ return ret;
+ }
+
+ ret = devm_led_classdev_flash_register_ext(parent, &led->flash, init_data);
+ if (ret) {
+ dev_err(parent, "Couldn't register flash %d\n", led->led_no);
+ return ret;
+ }
+
+ mt6360_init_v4l2_config(led, &v4l2_config);
+ led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode, &led->flash,
+ &v4l2_flash_ops, &v4l2_config);
+ }
+
+ if (IS_ERR(led->v4l2_flash)) {
+ dev_err(parent, "Failed to register %d v4l2 sd\n", led->led_no);
+ return PTR_ERR(led->v4l2_flash);
+ }
+
+ return 0;
+}
+
+static u32 clamp_align(u32 val, u32 min, u32 max, u32 step)
+{
+ u32 retval;
+
+ retval = clamp_val(val, min, max);
+ if (step > 1)
+ retval = rounddown(retval - min, step) + min;
+
+ return retval;
+}
+
+static int mt6360_init_isnk_properties(struct mt6360_led *led, struct led_init_data *init_data)
+{
+ struct led_classdev *lcdev;
+ struct mt6360_priv *priv = led->priv;
+ struct fwnode_handle *child;
+ u32 step_uA = MT6360_ISNKRGB_STEPUA, max_uA = MT6360_ISNKRGB_MAXUA;
+ u32 val;
+ int num_color = 0, ret;
+
+ if (led->led_no == MT6360_LED_MULTICOLOR) {
+ struct mc_subled *sub_led;
+
+ sub_led = devm_kzalloc(priv->dev, sizeof(*sub_led) * MULTICOLOR_NUM_CHANNELS,
+ GFP_KERNEL);
+ if (!sub_led)
+ return -ENOMEM;
+
+ fwnode_for_each_child_node(init_data->fwnode, child) {
+ u32 reg, color;
+
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret || reg > MT6360_LED_ISNK3 || priv->leds_active & BIT(reg))
+ return -EINVAL;
+
+ ret = fwnode_property_read_u32(child, "color", &color);
+ if (ret) {
+ dev_err(priv->dev, "led %d, no color specified\n", led->led_no);
+ return ret;
+ }
+
+ priv->leds_active |= BIT(reg);
+ sub_led[num_color].color_index = color;
+ sub_led[num_color].channel = reg;
+ num_color++;
+ }
+
+ if (num_color < 2) {
+ dev_err(priv->dev, "Multicolor must include 2 or more led channel\n");
+ return -EINVAL;
+ }
+
+ led->mc.num_colors = num_color;
+ led->mc.subled_info = sub_led;
+
+ lcdev = &led->mc.led_cdev;
+ lcdev->brightness_set_blocking = mt6360_mc_brightness_set;
+ } else {
+ if (led->led_no == MT6360_LED_ISNKML) {
+ step_uA = MT6360_ISNKML_STEPUA;
+ max_uA = MT6360_ISNKML_MAXUA;
+ }
+
+ lcdev = &led->isnk;
+ lcdev->brightness_set_blocking = mt6360_isnk_brightness_set;
+ }
+
+ ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
+ if (ret) {
+ dev_warn(priv->dev, "Not specified led-max-microamp, config to the minimum\n");
+ val = step_uA;
+ } else
+ val = clamp_align(val, 0, max_uA, step_uA);
+
+ lcdev->max_brightness = val / step_uA;
+
+ fwnode_property_read_string(init_data->fwnode, "linux,default-trigger",
+ &lcdev->default_trigger);
+
+ return 0;
+}
+
+static int mt6360_init_flash_properties(struct mt6360_led *led, struct led_init_data *init_data)
+{
+ struct led_classdev_flash *flash = &led->flash;
+ struct led_classdev *lcdev = &flash->led_cdev;
+ struct mt6360_priv *priv = led->priv;
+ struct led_flash_setting *s;
+ u32 val;
+ int ret;
+
+ ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
+ if (ret) {
+ dev_warn(priv->dev, "Not specified led-max-microamp, config to the minimum\n");
+ val = MT6360_ITORCH_MINUA;
+ } else
+ val = clamp_align(val, MT6360_ITORCH_MINUA, MT6360_ITORCH_MAXUA,
+ MT6360_ITORCH_STEPUA);
+
+ lcdev->max_brightness = (val - MT6360_ITORCH_MINUA) / MT6360_ITORCH_STEPUA + 1;
+ lcdev->brightness_set_blocking = mt6360_torch_brightness_set;
+ lcdev->flags |= LED_DEV_CAP_FLASH;
+
+ ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp", &val);
+ if (ret) {
+ dev_warn(priv->dev, "Not specified flash-max-microamp, config to the minimum\n");
+ val = MT6360_ISTRB_MINUA;
+ } else
+ val = clamp_align(val, MT6360_ISTRB_MINUA, MT6360_ISTRB_MAXUA, MT6360_ISTRB_STEPUA);
+
+ s = &flash->brightness;
+ s->min = MT6360_ISTRB_MINUA;
+ s->step = MT6360_ISTRB_STEPUA;
+ s->val = s->max = val;
+
+ /* Always configure as min level when off to prevent flash current spike */
+ ret = _mt6360_flash_brightness_set(flash, s->min);
+ if (ret)
+ return ret;
+
+ ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-timeout-us", &val);
+ if (ret) {
+ dev_warn(priv->dev, "Not specified flash-max-timeout-us, config to the minimum\n");
+ val = MT6360_STRBTO_MINUS;
+ } else
+ val = clamp_align(val, MT6360_STRBTO_MINUS, MT6360_STRBTO_MAXUS,
+ MT6360_STRBTO_STEPUS);
+
+ s = &flash->timeout;
+ s->min = MT6360_STRBTO_MINUS;
+ s->step = MT6360_STRBTO_STEPUS;
+ s->val = s->max = val;
+
+ flash->ops = &mt6360_flash_ops;
+
+ return 0;
+}
+
+static int mt6360_init_common_properties(struct mt6360_led *led, struct led_init_data *init_data)
+{
+ const char * const states[] = { "off", "keep", "on" };
+ const char *str;
+ int ret;
+
+ if (!fwnode_property_read_string(init_data->fwnode, "default-state", &str)) {
+ ret = match_string(states, ARRAY_SIZE(states), str);
+ if (ret < 0)
+ ret = STATE_OFF;
+
+ led->default_state = ret;
+ }
+
+ return 0;
+}
+
+static void mt6360_v4l2_flash_release(struct mt6360_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->leds_count; i++) {
+ struct mt6360_led *led = priv->leds + i;
+
+ if (led->v4l2_flash)
+ v4l2_flash_release(led->v4l2_flash);
+
+ }
+}
+
+static int mt6360_led_probe(struct platform_device *pdev)
+{
+ struct mt6360_priv *priv;
+ struct fwnode_handle *child;
+ size_t count;
+ int i = 0, ret;
+
+ count = device_get_child_node_count(&pdev->dev);
+ if (!count || count > MT6360_MAX_LEDS) {
+ dev_err(&pdev->dev, "No child node or node count over max led number %lu\n", count);
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->leds_count = count;
+ priv->dev = &pdev->dev;
+ mutex_init(&priv->lock);
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap) {
+ dev_err(&pdev->dev, "Failed to get parent regmap\n");
+ return -ENODEV;
+ }
+
+ device_for_each_child_node(&pdev->dev, child) {
+ struct mt6360_led *led = priv->leds + i;
+ struct led_init_data init_data = { .fwnode = child, };
+ u32 reg;
+
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret)
+ goto out_flash_release;
+
+ if (reg > MT6360_MAX_LEDS || priv->leds_active & BIT(reg))
+ return -EINVAL;
+ priv->leds_active |= BIT(reg);
+
+ led->led_no = reg;
+ led->priv = priv;
+
+ ret = mt6360_init_common_properties(led, &init_data);
+ if (ret)
+ goto out_flash_release;
+
+ if (reg == MT6360_LED_MULTICOLOR ||
+ (reg >= MT6360_LED_ISNK1 && reg <= MT6360_LED_ISNKML))
+ ret = mt6360_init_isnk_properties(led, &init_data);
+ else
+ ret = mt6360_init_flash_properties(led, &init_data);
+
+ if (ret)
+ goto out_flash_release;
+
+ ret = mt6360_led_register(&pdev->dev, led, &init_data);
+ if (ret)
+ goto out_flash_release;
+
+ i++;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+
+out_flash_release:
+ mt6360_v4l2_flash_release(priv);
+ return ret;
+}
+
+static int mt6360_led_remove(struct platform_device *pdev)
+{
+ struct mt6360_priv *priv = platform_get_drvdata(pdev);
+
+ mt6360_v4l2_flash_release(priv);
+ return 0;
+}
+
+static const struct of_device_id __maybe_unused mt6360_led_of_id[] = {
+ { .compatible = "mediatek,mt6360-led", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6360_led_of_id);
+
+static struct platform_driver mt6360_led_driver = {
+ .driver = {
+ .name = "mt6360-led",
+ .of_match_table = mt6360_led_of_id,
+ },
+ .probe = mt6360_led_probe,
+ .remove = mt6360_led_remove,
+};
+module_platform_driver(mt6360_led_driver);
+
+MODULE_AUTHOR("Gene Chen <[email protected]>");
+MODULE_DESCRIPTION("MT6360 LED Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Hi Gene,
Thank you for the patch.
On 11/17/20 11:55 AM, Gene Chen wrote:
> From: Gene Chen <[email protected]>
>
> Add bindings document for LED support on MT6360 PMIC
>
> Signed-off-by: Gene Chen <[email protected]>
> ---
> .../devicetree/bindings/leds/leds-mt6360.yaml | 114 +++++++++++++++++++++
> 1 file changed, 114 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6360.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
> new file mode 100644
> index 0000000..871db4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LED driver for MT6360 PMIC from MediaTek Integrated.
> +
> +maintainers:
> + - Gene Chen <[email protected]>
> +
> +description: |
> + This module is part of the MT6360 MFD device.
> + see Documentation/devicetree/bindings/mfd/mt6360.yaml
> + Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
> + and 4-channel RGB LED support Register/Flash/Breath Mode
What actually is the Register mode?
> +
> +properties:
> + compatible:
> + const: mediatek,mt6360-led
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^led@[0-6]$":
> + type: object
> + $ref: common.yaml#
> + description:
> + Properties for a single LED.
> +
> + properties:
> + reg:
> + description: Index of the LED.
> + enum:
> + - 0 # LED output INDICATOR1_RED
> + - 1 # LED output INDICATOR1_GREEN
> + - 2 # LED output INDICATOR1_BLUE
> + - 3 # LED output INDICATOR2_ML
> + - 4 # LED output FLED1
> + - 5 # LED output FLED2
> + - 6 # LED output MULTICOLOR
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/common.h>
> + led-controller {
> + compatible = "mediatek,mt6360-led";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_RED>;
> + led-max-microamp = <24000>;
> + };
> + led@3 {
> + reg = <3>;
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_AMBER>;
You should really have here LED_COLOR_ID_MOONLIGHT if this is
a moonlight LED. You'll need to add it to dt-bindings/leds/common.h.
> + led-max-microamp = <150000>;
> + };
> + led@4 {
> + reg = <4>;
> + function = LED_FUNCTION_FLASH;
> + color = <LED_COLOR_ID_WHITE>;
> + function-enumerator = <1>;
> + led-max-microamp = <200000>;
> + flash-max-microamp = <500000>;
> + flash-max-timeout-us = <1024000>;
> + };
> + led@5 {
> + reg = <5>;
> + function = LED_FUNCTION_FLASH;
> + color = <LED_COLOR_ID_WHITE>;
> + function-enumerator = <2>;
> + led-max-microamp = <200000>;
> + flash-max-microamp = <500000>;
> + flash-max-timeout-us = <1024000>;
> + };
> + led@6 {
> + reg = <6>;
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_MULTI>;
> + led-max-microamp = <24000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@1 {
> + reg = <1>;
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> + led@2 {
> + reg = <2>;
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
It is of little avail to have multicolor LED with only two LEDs.
I propose not to allow such setup - i.e. you should have either
one multicolor LED comprising three sub-LEDs (regs: 0, 1, 2),
and with main color property set to LED_COLOR_ID_RGB, or three separate
LEDs.
Effectively, you should have two separate DT examples here to make it
clear: one for the case with three LED class devices and one with
LED multicolor class device.
> + };
> +...
>
--
Best regards,
Jacek Anaszewski
Hi Gene,
On 11/17/20 11:55 AM, Gene Chen wrote:
> From: Gene Chen <[email protected]>
>
> Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
> 3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
> moonlight LED.
>
> Signed-off-by: Gene Chen <[email protected]>
> ---
> drivers/leds/Kconfig | 13 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-mt6360.c | 817 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 831 insertions(+)
> create mode 100644 drivers/leds/leds-mt6360.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 1c181df..4f533bc 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -271,6 +271,19 @@ config LEDS_MT6323
> This option enables support for on-chip LED drivers found on
> Mediatek MT6323 PMIC.
>
> +config LEDS_MT6360
> + tristate "LED Support for Mediatek MT6360 PMIC"
> + depends on LEDS_CLASS && OF
> + depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH
> + depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
> + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
> + depends on MFD_MT6360
> + help
> + This option enables support for dual Flash LED drivers found on
> + Mediatek MT6360 PMIC.
> + Independent current sources supply for each flash LED support torch
> + and strobe mode.
> +
> config LEDS_S3C24XX
> tristate "LED Support for Samsung S3C24XX GPIO LEDs"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index c2c7d7a..5596427 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
> obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
> obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
> +obj-$(CONFIG_LEDS_MT6360) += leds-mt6360.o
> obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
> obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
> diff --git a/drivers/leds/leds-mt6360.c b/drivers/leds/leds-mt6360.c
> new file mode 100644
> index 0000000..e3a30bd
> --- /dev/null
> +++ b/drivers/leds/leds-mt6360.c
> @@ -0,0 +1,817 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <media/v4l2-flash-led-class.h>
> +
> +enum {
> + MT6360_LED_ISNK1 = 0,
> + MT6360_LED_ISNK2,
> + MT6360_LED_ISNK3,
> + MT6360_LED_ISNKML,
> + MT6360_LED_FLASH1,
> + MT6360_LED_FLASH2,
> + MT6360_LED_MULTICOLOR,
> + MT6360_MAX_LEDS = MT6360_LED_MULTICOLOR
> +};
> +
> +#define MT6360_REG_RGBEN 0x380
> +#define MT6360_REG_ISNK(_led_no) (0x381 + (_led_no))
> +#define MT6360_ISNK_ENMASK(_led_no) BIT(7 - (_led_no))
> +#define MT6360_ISNK_MASK GENMASK(4, 0)
> +#define MT6360_CHRINDSEL_MASK BIT(3)
> +
> +#define MULTICOLOR_NUM_CHANNELS 3
> +
> +#define MT6360_REG_FLEDEN 0x37E
> +#define MT6360_REG_STRBTO 0x373
> +#define MT6360_REG_FLEDBASE(_id) (0x372 + 4 * (_id - MT6360_LED_FLASH1))
> +#define MT6360_REG_FLEDISTRB(_id) (MT6360_REG_FLEDBASE(_id) + 2)
> +#define MT6360_REG_FLEDITOR(_id) (MT6360_REG_FLEDBASE(_id) + 3)
> +#define MT6360_REG_CHGSTAT2 0x3E1
> +#define MT6360_REG_FLEDSTAT1 0x3E9
> +#define MT6360_ITORCH_MASK GENMASK(4, 0)
> +#define MT6360_ISTROBE_MASK GENMASK(6, 0)
> +#define MT6360_STRBTO_MASK GENMASK(6, 0)
> +#define MT6360_TORCHEN_MASK BIT(3)
> +#define MT6360_STROBEN_MASK BIT(2)
> +#define MT6360_FLCSEN_MASK(_id) BIT(MT6360_LED_FLASH2 - _id)
> +#define MT6360_FLEDCHGVINOVP_MASK BIT(3)
> +#define MT6360_FLED1STRBTO_MASK BIT(11)
> +#define MT6360_FLED2STRBTO_MASK BIT(10)
> +#define MT6360_FLED1STRB_MASK BIT(9)
> +#define MT6360_FLED2STRB_MASK BIT(8)
> +#define MT6360_FLED1SHORT_MASK BIT(7)
> +#define MT6360_FLED2SHORT_MASK BIT(6)
> +#define MT6360_FLEDLVF_MASK BIT(3)
> +
> +#define MT6360_ISNKRGB_STEPUA 2000
> +#define MT6360_ISNKRGB_MAXUA 24000
> +#define MT6360_ISNKML_STEPUA 5000
> +#define MT6360_ISNKML_MAXUA 150000
> +
> +#define MT6360_ITORCH_MINUA 25000
> +#define MT6360_ITORCH_STEPUA 12500
> +#define MT6360_ITORCH_MAXUA 400000
> +#define MT6360_ISTRB_MINUA 50000
> +#define MT6360_ISTRB_STEPUA 12500
> +#define MT6360_ISTRB_MAXUA 1500000
> +#define MT6360_STRBTO_MINUS 64000
> +#define MT6360_STRBTO_STEPUS 32000
> +#define MT6360_STRBTO_MAXUS 2432000
> +
> +#define STATE_OFF 0
> +#define STATE_KEEP 1
> +#define STATE_ON 2
> +
> +struct mt6360_led {
> + union {
> + struct led_classdev isnk;
> + struct led_classdev_mc mc;
> + struct led_classdev_flash flash;
> + };
> + struct v4l2_flash *v4l2_flash;
> + struct mt6360_priv *priv;
> + u32 led_no;
> + u32 default_state;
> +};
> +
> +struct mt6360_priv {
> + struct device *dev;
> + struct regmap *regmap;
> + struct mutex lock;
> + unsigned int fled_strobe_used;
> + unsigned int fled_torch_used;
> + unsigned int leds_active;
> + unsigned int leds_count;
> + struct mt6360_led leds[];
> +};
> +
> +static int mt6360_mc_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
> +{
> + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
> + struct mt6360_led *led = container_of(mccdev, struct mt6360_led, mc);
> + struct mt6360_priv *priv = led->priv;
> + u32 real_bright, enable_mask = 0, enable = 0;
> + int i, ret;
> +
> + mutex_lock(&priv->lock);
> +
> + led_mc_calc_color_components(mccdev, level);
> +
> + for (i = 0; i < mccdev->num_colors; i++) {
> + struct mc_subled *subled = mccdev->subled_info + i;
> +
> + real_bright = min(lcdev->max_brightness, subled->brightness);
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_ISNK(i), MT6360_ISNK_MASK,
> + real_bright);
> + if (ret)
> + goto out;
> +
> + enable_mask |= MT6360_ISNK_ENMASK(subled->channel);
> + if (real_bright)
> + enable |= MT6360_ISNK_ENMASK(subled->channel);
> + }
> +
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, enable_mask, enable);
> +
> +out:
> + mutex_unlock(&priv->lock);
> + return ret;
> +}
> +
> +static int mt6360_isnk_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
> +{
> + struct mt6360_led *led = container_of(lcdev, struct mt6360_led, isnk);
> + struct mt6360_priv *priv = led->priv;
> + u32 enable_mask = MT6360_ISNK_ENMASK(led->led_no);
> + u32 val = level ? MT6360_ISNK_ENMASK(led->led_no) : 0;
> + int ret;
> +
> + mutex_lock(&priv->lock);
> +
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_ISNK(led->led_no), MT6360_ISNK_MASK,
> + level);
> + if (ret)
> + goto out;
> +
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, enable_mask, val);
> +
> +out:
> + mutex_unlock(&priv->lock);
> + return ret;
> +}
> +
> +static int mt6360_torch_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
> +{
> + struct mt6360_led *led = container_of(lcdev, struct mt6360_led, flash.led_cdev);
> + struct mt6360_priv *priv = led->priv;
> + u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
> + u32 val = level ? MT6360_FLCSEN_MASK(led->led_no) : 0;
> + u32 prev = priv->fled_torch_used, curr;
> + int ret;
> +
> + mutex_lock(&priv->lock);
> +
> + /* Only one set of flash control logic, use the flag to avoid strobe is currently used */
> + if (priv->fled_strobe_used) {
> + dev_warn(lcdev->dev, "Please disable strobe first [%d]\n", priv->fled_strobe_used);
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (level)
> + curr = prev | BIT(led->led_no);
> + else
> + curr = prev & ~BIT(led->led_no);
> +
> + if (curr)
> + val |= MT6360_TORCHEN_MASK;
> +
> + if (level) {
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDITOR(led->led_no),
> + MT6360_ITORCH_MASK, level - 1);
> + if (ret)
> + goto out;
> + }
> +
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, enable_mask, val);
> + if (ret)
> + goto out;
> +
> + priv->fled_torch_used = curr;
> +
> +out:
> + mutex_unlock(&priv->lock);
> + return ret;
> +}
> +
> +static int mt6360_flash_brightness_set(struct led_classdev_flash *fl_cdev, u32 brightness)
> +{
> + /*
> + * Due to the current spike when turning on flash, let brightness to be kept by framework.
> + * This empty function is used to prevent led_classdev_flash register ops check failure.
> + */
> + return 0;
> +}
> +
> +static int _mt6360_flash_brightness_set(struct led_classdev_flash *fl_cdev, u32 brightness)
> +{
> + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> + struct mt6360_priv *priv = led->priv;
> + struct led_flash_setting *s = &fl_cdev->brightness;
> + u32 val = (brightness - s->min) / s->step;
> +
> + return regmap_update_bits(priv->regmap, MT6360_REG_FLEDISTRB(led->led_no),
> + MT6360_ISTROBE_MASK, val);
> +}
> +
> +static int mt6360_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
> +{
> + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> + struct mt6360_priv *priv = led->priv;
> + struct led_classdev *lcdev = &fl_cdev->led_cdev;
> + struct led_flash_setting *s = &fl_cdev->brightness;
> + u32 enable_mask = MT6360_STROBEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
> + u32 val = state ? MT6360_FLCSEN_MASK(led->led_no) : 0;
> + u32 prev = priv->fled_strobe_used, curr;
> + int ret;
> +
> + /* Only one set of flash control logic, use the flag to avoid torch is currently used */
> + if (priv->fled_torch_used) {
> + dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n", priv->fled_torch_used);
> + return -EBUSY;
> + }
> +
> + if (state)
> + curr = prev | BIT(led->led_no);
> + else
> + curr = prev & ~BIT(led->led_no);
> +
> + if (curr)
> + val |= MT6360_STROBEN_MASK;
You need to use mutex protection consequently in all ops
accessing device registers.
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, enable_mask, val);
> + if (ret) {
> + dev_err(lcdev->dev, "[%d] control current source %d fail\n", led->led_no, state);
> + return ret;
> + }
> +
> + /*
> + * If the flash need to be on, config the flash current ramping up to the setting value
> + * Else, always recover back to the minimum one
> + */
> + ret = _mt6360_flash_brightness_set(fl_cdev, state ? s->val : s->min);
> + if (ret)
> + return ret;
> +
> + /* For the flash turn on/off, HW rampping up/down time is 5ms/500us, respectively */
> + if (!prev && curr)
> + usleep_range(5000, 6000);
> + else if (prev && !curr)
> + udelay(500);
> +
> + priv->fled_strobe_used = curr;
> + return 0;
> +}
> +
> +static int mt6360_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
> +{
> + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> + struct mt6360_priv *priv = led->priv;
Ditto.
> + *state = !!(priv->fled_strobe_used & BIT(led->led_no));
> + return 0;
> +}
> +
> +static int mt6360_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
> +{
> + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> + struct mt6360_priv *priv = led->priv;
> + struct led_flash_setting *s = &fl_cdev->timeout;
> + u32 val = (timeout - s->min) / s->step;
Ditto.
> + return regmap_update_bits(priv->regmap, MT6360_REG_STRBTO, MT6360_STRBTO_MASK, val);
> +
> +}
> +
> +static int mt6360_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
> +{
> + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> + struct mt6360_priv *priv = led->priv;
> + u16 fled_stat;
> + unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
> + u32 rfault = 0;
> + int ret;
Ditto.
> + ret = regmap_read(priv->regmap, MT6360_REG_CHGSTAT2, &chg_stat);
> + if (ret)
> + return ret;
> +
> + ret = regmap_raw_read(priv->regmap, MT6360_REG_FLEDSTAT1, &fled_stat, sizeof(fled_stat));
> + if (ret)
> + return ret;
> +
> + if (led->led_no == MT6360_LED_FLASH1) {
> + strobe_timeout_mask = MT6360_FLED1STRBTO_MASK;
> + fled_short_mask = MT6360_FLED1SHORT_MASK;
> + } else {
> + strobe_timeout_mask = MT6360_FLED2STRBTO_MASK;
> + fled_short_mask = MT6360_FLED2SHORT_MASK;
> + }
> +
> + if (chg_stat & MT6360_FLEDCHGVINOVP_MASK)
> + rfault |= LED_FAULT_INPUT_VOLTAGE;
> +
> + if (fled_stat & strobe_timeout_mask)
> + rfault |= LED_FAULT_TIMEOUT;
> +
> + if (fled_stat & fled_short_mask)
> + rfault |= LED_FAULT_SHORT_CIRCUIT;
> +
> + if (fled_stat & MT6360_FLEDLVF_MASK)
> + rfault |= LED_FAULT_UNDER_VOLTAGE;
> +
> + *fault = rfault;
> + return 0;
> +}
> +
> +static const struct led_flash_ops mt6360_flash_ops = {
> + .flash_brightness_set = mt6360_flash_brightness_set,
> + .strobe_set = mt6360_strobe_set,
> + .strobe_get = mt6360_strobe_get,
> + .timeout_set = mt6360_timeout_set,
> + .fault_get = mt6360_fault_get,
> +};
> +
> +static int mt6360_isnk_init_default_state(struct mt6360_led *led)
> +{
> + struct mt6360_priv *priv = led->priv;
> + unsigned int regval;
> + u32 level;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, MT6360_REG_ISNK(led->led_no), ®val);
> + if (ret)
> + return ret;
> + level = regval & MT6360_ISNK_MASK;
> +
> + ret = regmap_read(priv->regmap, MT6360_REG_RGBEN, ®val);
> + if (ret)
> + return ret;
> +
> + if (!(regval & MT6360_ISNK_ENMASK(led->led_no)))
> + level = LED_OFF;
> +
> + switch (led->default_state) {
> + case STATE_ON:
> + led->isnk.brightness = led->isnk.max_brightness;
> + break;
> + case STATE_KEEP:
> + led->isnk.brightness = min(level, led->isnk.max_brightness);
> + break;
> + default:
> + led->isnk.brightness = LED_OFF;
> + }
> +
> + return mt6360_isnk_brightness_set(&led->isnk, led->isnk.brightness);
> +}
> +
> +static int mt6360_flash_init_default_state(struct mt6360_led *led)
> +{
> + struct led_classdev_flash *flash = &led->flash;
> + struct mt6360_priv *priv = led->priv;
> + u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
> + u32 level;
> + unsigned int regval;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, MT6360_REG_FLEDITOR(led->led_no), ®val);
> + if (ret)
> + return ret;
> + level = regval & MT6360_ITORCH_MASK;
> +
> + ret = regmap_read(priv->regmap, MT6360_REG_FLEDEN, ®val);
> + if (ret)
> + return ret;
> +
> + if ((regval & enable_mask) == enable_mask)
> + level += 1;
> + else
> + level = LED_OFF;
> +
> + switch (led->default_state) {
> + case STATE_ON:
> + flash->led_cdev.brightness = flash->led_cdev.max_brightness;
> + break;
> + case STATE_KEEP:
> + flash->led_cdev.brightness = min(level, flash->led_cdev.max_brightness);
> + break;
> + default:
> + flash->led_cdev.brightness = LED_OFF;
> + }
> +
> + return mt6360_torch_brightness_set(&flash->led_cdev, flash->led_cdev.brightness);
> +}
> +
> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> +static int mt6360_flash_external_strobe_set(struct v4l2_flash *v4l2_flash, bool enable)
> +{
> + struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> + struct mt6360_led *led = container_of(flash, struct mt6360_led, flash);
> + struct mt6360_priv *priv = led->priv;
> + u32 mask = MT6360_FLCSEN_MASK(led->led_no);
> + u32 val = enable ? mask : 0;
> + int ret;
Mutex is needed here as well.
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, mask, val);
> + if (ret)
> + return ret;
> +
> + if (enable)
> + priv->fled_strobe_used |= BIT(led->led_no);
> + else
> + priv->fled_strobe_used &= ~BIT(led->led_no);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_flash_ops v4l2_flash_ops = {
> + .external_strobe_set = mt6360_flash_external_strobe_set,
> +};
> +
> +static void mt6360_init_v4l2_config(struct mt6360_led *led, struct v4l2_flash_config *config)
s/mt6360_init_v4l2_config/mt6360_init_v4l2_flash_config/
> +{
> + struct led_classdev *lcdev;
> + struct led_flash_setting *s = &config->intensity;
> +
Multicolor LEDs don't need to be registered with V4L2.
I've explained before that I had been misled by the fact that you name
these LEDs as "indicators", which for flash LED controllers usually
means something different.
Please drop the code under "if" branch.
> + if (led->led_no == MT6360_LED_MULTICOLOR ||
> + (led->led_no >= MT6360_LED_ISNK1 && led->led_no <= MT6360_LED_ISNKML)) {
> + if (led->led_no != MT6360_LED_MULTICOLOR)
> + lcdev = &led->isnk;
> + else
> + lcdev = &led->mc.led_cdev;
> +
> + s->step = MT6360_ISNKRGB_STEPUA;
> +
> + if (led->led_no == MT6360_LED_ISNKML)
> + s->step = MT6360_ISNKML_STEPUA;
> +
> + s->min = 0;
> + s->val = lcdev->brightness * s->step;
> + s->max = lcdev->max_brightness * s->step;
> + } else {
> + lcdev = &led->flash.led_cdev;
> +
> + s->min = MT6360_ITORCH_MINUA;
> + s->step = MT6360_ITORCH_STEPUA;
> + s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
> +
> + config->has_external_strobe = 1;
You also need to initialize flash faults config:
config>flash_faults = ....
> + }
> +
> + strscpy(config->dev_name, lcdev->dev->kobj.name, sizeof(config->dev_name));
> +}
> +#else
> +static const struct v4l2_flash_ops v4l2_flash_ops;
> +
> +static void mt6360_init_v4l2_config(struct mt6360_led *led, struct v4l2_flash_config *config)
> +{
> +}
> +#endif
> +
> +static int mt6360_led_register(struct device *parent, struct mt6360_led *led,
> + struct led_init_data *init_data)
> +{
> + struct mt6360_priv *priv = led->priv;
> + struct v4l2_flash_config v4l2_config = {0};
> + int ret;
> +
> + if ((led->led_no == MT6360_LED_ISNK1 || led->led_no == MT6360_LED_MULTICOLOR) &&
> + (priv->leds_active & BIT(MT6360_LED_ISNK1))) {
> + /* Change isink1 to SW control mode, disconnect it with charger state */
> + ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, MT6360_CHRINDSEL_MASK,
> + MT6360_CHRINDSEL_MASK);
> + if (ret) {
> + dev_err(parent, "Failed to config ISNK1 to SW mode\n");
> + return ret;
> + }
> + }
> +
> + switch (led->led_no) {
> + case MT6360_LED_MULTICOLOR:
> + ret = mt6360_mc_brightness_set(&led->mc.led_cdev, LED_OFF);
> + if (ret) {
> + dev_err(parent, "Failed to init multicolor brightness\n");
> + return ret;
> + }
> +
> + ret = devm_led_classdev_multicolor_register_ext(parent, &led->mc, init_data);
> + if (ret) {
> + dev_err(parent, "Couldn't register multicolor\n");
> + return ret;
> + }
Don't register this LED with V4L2.
> + mt6360_init_v4l2_config(led, &v4l2_config);
> + led->v4l2_flash = v4l2_flash_indicator_init(parent, init_data->fwnode,
> + &led->mc.led_cdev, &v4l2_config);
> + break;
> + case MT6360_LED_ISNK1 ... MT6360_LED_ISNKML:
> + ret = mt6360_isnk_init_default_state(led);
> + if (ret) {
> + dev_err(parent, "Failed to init %d isnk state\n", led->led_no);
> + return ret;
> + }
> +
> + ret = devm_led_classdev_register_ext(parent, &led->isnk, init_data);
> + if (ret) {
> + dev_err(parent, "Couldn't register isink %d\n", led->led_no);
> + return ret;
> + }
As you've previously clarified these are not flash indicators, so no
need to register them with V4L2.
> + mt6360_init_v4l2_config(led, &v4l2_config);
> + led->v4l2_flash = v4l2_flash_indicator_init(parent, init_data->fwnode, &led->isnk,
> + &v4l2_config);
> + break;
> + default:
> + ret = mt6360_flash_init_default_state(led);
> + if (ret) {
> + dev_err(parent, "Failed to init %d flash state\n", led->led_no);
> + return ret;
> + }
> +
> + ret = devm_led_classdev_flash_register_ext(parent, &led->flash, init_data);
You need to add discussed no-ops for this function, or otherwise the
compilation will break when CONFIG_LEDS_CLASS_FLASH will not be set, for
which you now allow in your Kconfig entry.
Discussed fixes for multicolor registration functions are needed as
well. Please add the required patches at the beginning of this patch
set.
> + if (ret) {
> + dev_err(parent, "Couldn't register flash %d\n", led->led_no);
> + return ret;
> + }
> +
> + mt6360_init_v4l2_config(led, &v4l2_config);
> + led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode, &led->flash,
> + &v4l2_flash_ops, &v4l2_config);
> + }
> +
> + if (IS_ERR(led->v4l2_flash)) {
> + dev_err(parent, "Failed to register %d v4l2 sd\n", led->led_no);
> + return PTR_ERR(led->v4l2_flash);
> + }
> +
> + return 0;
> +}
> +
> +static u32 clamp_align(u32 val, u32 min, u32 max, u32 step)
> +{
> + u32 retval;
> +
> + retval = clamp_val(val, min, max);
> + if (step > 1)
> + retval = rounddown(retval - min, step) + min;
> +
> + return retval;
> +}
> +
> +static int mt6360_init_isnk_properties(struct mt6360_led *led, struct led_init_data *init_data)
> +{
> + struct led_classdev *lcdev;
> + struct mt6360_priv *priv = led->priv;
> + struct fwnode_handle *child;
> + u32 step_uA = MT6360_ISNKRGB_STEPUA, max_uA = MT6360_ISNKRGB_MAXUA;
> + u32 val;
> + int num_color = 0, ret;
> +
> + if (led->led_no == MT6360_LED_MULTICOLOR) {
> + struct mc_subled *sub_led;
> +
> + sub_led = devm_kzalloc(priv->dev, sizeof(*sub_led) * MULTICOLOR_NUM_CHANNELS,
> + GFP_KERNEL);
> + if (!sub_led)
> + return -ENOMEM;
> +
> + fwnode_for_each_child_node(init_data->fwnode, child) {
> + u32 reg, color;
> +
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret || reg > MT6360_LED_ISNK3 || priv->leds_active & BIT(reg))
> + return -EINVAL;
> +
> + ret = fwnode_property_read_u32(child, "color", &color);
> + if (ret) {
> + dev_err(priv->dev, "led %d, no color specified\n", led->led_no);
> + return ret;
> + }
> +
> + priv->leds_active |= BIT(reg);
> + sub_led[num_color].color_index = color;
> + sub_led[num_color].channel = reg;
> + num_color++;
> + }
> +
> + if (num_color < 2) {
> + dev_err(priv->dev, "Multicolor must include 2 or more led channel\n");
> + return -EINVAL;
> + }
> +
> + led->mc.num_colors = num_color;
> + led->mc.subled_info = sub_led;
> +
> + lcdev = &led->mc.led_cdev;
> + lcdev->brightness_set_blocking = mt6360_mc_brightness_set;
> + } else {
> + if (led->led_no == MT6360_LED_ISNKML) {
> + step_uA = MT6360_ISNKML_STEPUA;
> + max_uA = MT6360_ISNKML_MAXUA;
> + }
> +
> + lcdev = &led->isnk;
> + lcdev->brightness_set_blocking = mt6360_isnk_brightness_set;
> + }
> +
> + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
> + if (ret) {
> + dev_warn(priv->dev, "Not specified led-max-microamp, config to the minimum\n");
> + val = step_uA;
> + } else
> + val = clamp_align(val, 0, max_uA, step_uA);
> +
> + lcdev->max_brightness = val / step_uA;
> +
> + fwnode_property_read_string(init_data->fwnode, "linux,default-trigger",
> + &lcdev->default_trigger);
> +
> + return 0;
> +}
> +
> +static int mt6360_init_flash_properties(struct mt6360_led *led, struct led_init_data *init_data)
> +{
> + struct led_classdev_flash *flash = &led->flash;
> + struct led_classdev *lcdev = &flash->led_cdev;
> + struct mt6360_priv *priv = led->priv;
> + struct led_flash_setting *s;
> + u32 val;
> + int ret;
> +
> + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
> + if (ret) {
> + dev_warn(priv->dev, "Not specified led-max-microamp, config to the minimum\n");
> + val = MT6360_ITORCH_MINUA;
> + } else
> + val = clamp_align(val, MT6360_ITORCH_MINUA, MT6360_ITORCH_MAXUA,
> + MT6360_ITORCH_STEPUA);
> +
> + lcdev->max_brightness = (val - MT6360_ITORCH_MINUA) / MT6360_ITORCH_STEPUA + 1;
> + lcdev->brightness_set_blocking = mt6360_torch_brightness_set;
> + lcdev->flags |= LED_DEV_CAP_FLASH;
> +
> + ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp", &val);
> + if (ret) {
> + dev_warn(priv->dev, "Not specified flash-max-microamp, config to the minimum\n");
> + val = MT6360_ISTRB_MINUA;
> + } else
> + val = clamp_align(val, MT6360_ISTRB_MINUA, MT6360_ISTRB_MAXUA, MT6360_ISTRB_STEPUA);
> +
> + s = &flash->brightness;
> + s->min = MT6360_ISTRB_MINUA;
> + s->step = MT6360_ISTRB_STEPUA;
> + s->val = s->max = val;
> +
> + /* Always configure as min level when off to prevent flash current spike */
> + ret = _mt6360_flash_brightness_set(flash, s->min);
> + if (ret)
> + return ret;
> +
> + ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-timeout-us", &val);
> + if (ret) {
> + dev_warn(priv->dev, "Not specified flash-max-timeout-us, config to the minimum\n");
> + val = MT6360_STRBTO_MINUS;
> + } else
> + val = clamp_align(val, MT6360_STRBTO_MINUS, MT6360_STRBTO_MAXUS,
> + MT6360_STRBTO_STEPUS);
> +
> + s = &flash->timeout;
> + s->min = MT6360_STRBTO_MINUS;
> + s->step = MT6360_STRBTO_STEPUS;
> + s->val = s->max = val;
> +
> + flash->ops = &mt6360_flash_ops;
> +
> + return 0;
> +}
> +
> +static int mt6360_init_common_properties(struct mt6360_led *led, struct led_init_data *init_data)
> +{
> + const char * const states[] = { "off", "keep", "on" };
> + const char *str;
> + int ret;
> +
> + if (!fwnode_property_read_string(init_data->fwnode, "default-state", &str)) {
> + ret = match_string(states, ARRAY_SIZE(states), str);
> + if (ret < 0)
> + ret = STATE_OFF;
> +
> + led->default_state = ret;
> + }
> +
> + return 0;
> +}
> +
> +static void mt6360_v4l2_flash_release(struct mt6360_priv *priv)
> +{
> + int i;
> +
> + for (i = 0; i < priv->leds_count; i++) {
> + struct mt6360_led *led = priv->leds + i;
> +
> + if (led->v4l2_flash)
> + v4l2_flash_release(led->v4l2_flash);
> +
> + }
> +}
> +
> +static int mt6360_led_probe(struct platform_device *pdev)
> +{
> + struct mt6360_priv *priv;
> + struct fwnode_handle *child;
> + size_t count;
> + int i = 0, ret;
> +
> + count = device_get_child_node_count(&pdev->dev);
> + if (!count || count > MT6360_MAX_LEDS) {
> + dev_err(&pdev->dev, "No child node or node count over max led number %lu\n", count);
> + return -EINVAL;
> + }
> +
> + priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->leds_count = count;
> + priv->dev = &pdev->dev;
> + mutex_init(&priv->lock);
> +
> + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!priv->regmap) {
> + dev_err(&pdev->dev, "Failed to get parent regmap\n");
> + return -ENODEV;
> + }
> +
> + device_for_each_child_node(&pdev->dev, child) {
> + struct mt6360_led *led = priv->leds + i;
> + struct led_init_data init_data = { .fwnode = child, };
> + u32 reg;
> +
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret)
> + goto out_flash_release;
> +
> + if (reg > MT6360_MAX_LEDS || priv->leds_active & BIT(reg))
> + return -EINVAL;
> + priv->leds_active |= BIT(reg);
> +
> + led->led_no = reg;
> + led->priv = priv;
> +
> + ret = mt6360_init_common_properties(led, &init_data);
> + if (ret)
> + goto out_flash_release;
> +
> + if (reg == MT6360_LED_MULTICOLOR ||
> + (reg >= MT6360_LED_ISNK1 && reg <= MT6360_LED_ISNKML))
> + ret = mt6360_init_isnk_properties(led, &init_data);
> + else
> + ret = mt6360_init_flash_properties(led, &init_data);
> +
> + if (ret)
> + goto out_flash_release;
> +
> + ret = mt6360_led_register(&pdev->dev, led, &init_data);
> + if (ret)
> + goto out_flash_release;
> +
> + i++;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> + return 0;
> +
> +out_flash_release:
> + mt6360_v4l2_flash_release(priv);
> + return ret;
> +}
> +
> +static int mt6360_led_remove(struct platform_device *pdev)
> +{
> + struct mt6360_priv *priv = platform_get_drvdata(pdev);
> +
> + mt6360_v4l2_flash_release(priv);
> + return 0;
> +}
> +
> +static const struct of_device_id __maybe_unused mt6360_led_of_id[] = {
> + { .compatible = "mediatek,mt6360-led", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mt6360_led_of_id);
> +
> +static struct platform_driver mt6360_led_driver = {
> + .driver = {
> + .name = "mt6360-led",
> + .of_match_table = mt6360_led_of_id,
> + },
> + .probe = mt6360_led_probe,
> + .remove = mt6360_led_remove,
> +};
> +module_platform_driver(mt6360_led_driver);
> +
> +MODULE_AUTHOR("Gene Chen <[email protected]>");
> +MODULE_DESCRIPTION("MT6360 LED Driver");
> +MODULE_LICENSE("GPL v2");
>
--
Best regards,
Jacek Anaszewski
Jacek Anaszewski <[email protected]> 於 2020年11月18日 週三 上午6:25寫道：
>
> Hi Gene,
>
> On 11/17/20 11:55 AM, Gene Chen wrote:
> > From: Gene Chen <[email protected]>
> >
> > Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
> > 3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
> > moonlight LED.
> >
> > Signed-off-by: Gene Chen <[email protected]>
> > ---
> > drivers/leds/Kconfig | 13 +
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-mt6360.c | 817 +++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 831 insertions(+)
> > create mode 100644 drivers/leds/leds-mt6360.c
> >
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index 1c181df..4f533bc 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -271,6 +271,19 @@ config LEDS_MT6323
> > This option enables support for on-chip LED drivers found on
> > Mediatek MT6323 PMIC.
> >
> > +config LEDS_MT6360
> > + tristate "LED Support for Mediatek MT6360 PMIC"
> > + depends on LEDS_CLASS && OF
> > + depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH
> > + depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR
> > + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
> > + depends on MFD_MT6360
> > + help
> > + This option enables support for dual Flash LED drivers found on
> > + Mediatek MT6360 PMIC.
> > + Independent current sources supply for each flash LED support torch
> > + and strobe mode.
> > +
> > config LEDS_S3C24XX
> > tristate "LED Support for Samsung S3C24XX GPIO LEDs"
> > depends on LEDS_CLASS
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > index c2c7d7a..5596427 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -66,6 +66,7 @@ obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
> > obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
> > obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
> > obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
> > +obj-$(CONFIG_LEDS_MT6360) += leds-mt6360.o
> > obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
> > obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> > obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
> > diff --git a/drivers/leds/leds-mt6360.c b/drivers/leds/leds-mt6360.c
> > new file mode 100644
> > index 0000000..e3a30bd
> > --- /dev/null
> > +++ b/drivers/leds/leds-mt6360.c
> > @@ -0,0 +1,817 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/delay.h>
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/led-class-flash.h>
> > +#include <linux/led-class-multicolor.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/regmap.h>
> > +#include <media/v4l2-flash-led-class.h>
> > +
> > +enum {
> > + MT6360_LED_ISNK1 = 0,
> > + MT6360_LED_ISNK2,
> > + MT6360_LED_ISNK3,
> > + MT6360_LED_ISNKML,
> > + MT6360_LED_FLASH1,
> > + MT6360_LED_FLASH2,
> > + MT6360_LED_MULTICOLOR,
> > + MT6360_MAX_LEDS = MT6360_LED_MULTICOLOR
> > +};
> > +
> > +#define MT6360_REG_RGBEN 0x380
> > +#define MT6360_REG_ISNK(_led_no) (0x381 + (_led_no))
> > +#define MT6360_ISNK_ENMASK(_led_no) BIT(7 - (_led_no))
> > +#define MT6360_ISNK_MASK GENMASK(4, 0)
> > +#define MT6360_CHRINDSEL_MASK BIT(3)
> > +
> > +#define MULTICOLOR_NUM_CHANNELS 3
> > +
> > +#define MT6360_REG_FLEDEN 0x37E
> > +#define MT6360_REG_STRBTO 0x373
> > +#define MT6360_REG_FLEDBASE(_id) (0x372 + 4 * (_id - MT6360_LED_FLASH1))
> > +#define MT6360_REG_FLEDISTRB(_id) (MT6360_REG_FLEDBASE(_id) + 2)
> > +#define MT6360_REG_FLEDITOR(_id) (MT6360_REG_FLEDBASE(_id) + 3)
> > +#define MT6360_REG_CHGSTAT2 0x3E1
> > +#define MT6360_REG_FLEDSTAT1 0x3E9
> > +#define MT6360_ITORCH_MASK GENMASK(4, 0)
> > +#define MT6360_ISTROBE_MASK GENMASK(6, 0)
> > +#define MT6360_STRBTO_MASK GENMASK(6, 0)
> > +#define MT6360_TORCHEN_MASK BIT(3)
> > +#define MT6360_STROBEN_MASK BIT(2)
> > +#define MT6360_FLCSEN_MASK(_id) BIT(MT6360_LED_FLASH2 - _id)
> > +#define MT6360_FLEDCHGVINOVP_MASK BIT(3)
> > +#define MT6360_FLED1STRBTO_MASK BIT(11)
> > +#define MT6360_FLED2STRBTO_MASK BIT(10)
> > +#define MT6360_FLED1STRB_MASK BIT(9)
> > +#define MT6360_FLED2STRB_MASK BIT(8)
> > +#define MT6360_FLED1SHORT_MASK BIT(7)
> > +#define MT6360_FLED2SHORT_MASK BIT(6)
> > +#define MT6360_FLEDLVF_MASK BIT(3)
> > +
> > +#define MT6360_ISNKRGB_STEPUA 2000
> > +#define MT6360_ISNKRGB_MAXUA 24000
> > +#define MT6360_ISNKML_STEPUA 5000
> > +#define MT6360_ISNKML_MAXUA 150000
> > +
> > +#define MT6360_ITORCH_MINUA 25000
> > +#define MT6360_ITORCH_STEPUA 12500
> > +#define MT6360_ITORCH_MAXUA 400000
> > +#define MT6360_ISTRB_MINUA 50000
> > +#define MT6360_ISTRB_STEPUA 12500
> > +#define MT6360_ISTRB_MAXUA 1500000
> > +#define MT6360_STRBTO_MINUS 64000
> > +#define MT6360_STRBTO_STEPUS 32000
> > +#define MT6360_STRBTO_MAXUS 2432000
> > +
> > +#define STATE_OFF 0
> > +#define STATE_KEEP 1
> > +#define STATE_ON 2
> > +
> > +struct mt6360_led {
> > + union {
> > + struct led_classdev isnk;
> > + struct led_classdev_mc mc;
> > + struct led_classdev_flash flash;
> > + };
> > + struct v4l2_flash *v4l2_flash;
> > + struct mt6360_priv *priv;
> > + u32 led_no;
> > + u32 default_state;
> > +};
> > +
> > +struct mt6360_priv {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct mutex lock;
> > + unsigned int fled_strobe_used;
> > + unsigned int fled_torch_used;
> > + unsigned int leds_active;
> > + unsigned int leds_count;
> > + struct mt6360_led leds[];
> > +};
> > +
> > +static int mt6360_mc_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
> > +{
> > + struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
> > + struct mt6360_led *led = container_of(mccdev, struct mt6360_led, mc);
> > + struct mt6360_priv *priv = led->priv;
> > + u32 real_bright, enable_mask = 0, enable = 0;
> > + int i, ret;
> > +
> > + mutex_lock(&priv->lock);
> > +
> > + led_mc_calc_color_components(mccdev, level);
> > +
> > + for (i = 0; i < mccdev->num_colors; i++) {
> > + struct mc_subled *subled = mccdev->subled_info + i;
> > +
> > + real_bright = min(lcdev->max_brightness, subled->brightness);
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_ISNK(i), MT6360_ISNK_MASK,
> > + real_bright);
> > + if (ret)
> > + goto out;
> > +
> > + enable_mask |= MT6360_ISNK_ENMASK(subled->channel);
> > + if (real_bright)
> > + enable |= MT6360_ISNK_ENMASK(subled->channel);
> > + }
> > +
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, enable_mask, enable);
> > +
> > +out:
> > + mutex_unlock(&priv->lock);
> > + return ret;
> > +}
> > +
> > +static int mt6360_isnk_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
> > +{
> > + struct mt6360_led *led = container_of(lcdev, struct mt6360_led, isnk);
> > + struct mt6360_priv *priv = led->priv;
> > + u32 enable_mask = MT6360_ISNK_ENMASK(led->led_no);
> > + u32 val = level ? MT6360_ISNK_ENMASK(led->led_no) : 0;
> > + int ret;
> > +
> > + mutex_lock(&priv->lock);
> > +
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_ISNK(led->led_no), MT6360_ISNK_MASK,
> > + level);
> > + if (ret)
> > + goto out;
> > +
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, enable_mask, val);
> > +
> > +out:
> > + mutex_unlock(&priv->lock);
> > + return ret;
> > +}
> > +
> > +static int mt6360_torch_brightness_set(struct led_classdev *lcdev, enum led_brightness level)
> > +{
> > + struct mt6360_led *led = container_of(lcdev, struct mt6360_led, flash.led_cdev);
> > + struct mt6360_priv *priv = led->priv;
> > + u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
> > + u32 val = level ? MT6360_FLCSEN_MASK(led->led_no) : 0;
> > + u32 prev = priv->fled_torch_used, curr;
> > + int ret;
> > +
> > + mutex_lock(&priv->lock);
> > +
> > + /* Only one set of flash control logic, use the flag to avoid strobe is currently used */
> > + if (priv->fled_strobe_used) {
> > + dev_warn(lcdev->dev, "Please disable strobe first [%d]\n", priv->fled_strobe_used);
> > + ret = -EBUSY;
> > + goto out;
> > + }
> > +
> > + if (level)
> > + curr = prev | BIT(led->led_no);
> > + else
> > + curr = prev & ~BIT(led->led_no);
> > +
> > + if (curr)
> > + val |= MT6360_TORCHEN_MASK;
> > +
> > + if (level) {
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDITOR(led->led_no),
> > + MT6360_ITORCH_MASK, level - 1);
> > + if (ret)
> > + goto out;
> > + }
> > +
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, enable_mask, val);
> > + if (ret)
> > + goto out;
> > +
> > + priv->fled_torch_used = curr;
> > +
> > +out:
> > + mutex_unlock(&priv->lock);
> > + return ret;
> > +}
> > +
> > +static int mt6360_flash_brightness_set(struct led_classdev_flash *fl_cdev, u32 brightness)
> > +{
> > + /*
> > + * Due to the current spike when turning on flash, let brightness to be kept by framework.
> > + * This empty function is used to prevent led_classdev_flash register ops check failure.
> > + */
> > + return 0;
> > +}
> > +
> > +static int _mt6360_flash_brightness_set(struct led_classdev_flash *fl_cdev, u32 brightness)
> > +{
> > + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> > + struct mt6360_priv *priv = led->priv;
> > + struct led_flash_setting *s = &fl_cdev->brightness;
> > + u32 val = (brightness - s->min) / s->step;
> > +
> > + return regmap_update_bits(priv->regmap, MT6360_REG_FLEDISTRB(led->led_no),
> > + MT6360_ISTROBE_MASK, val);
> > +}
> > +
> > +static int mt6360_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
> > +{
> > + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> > + struct mt6360_priv *priv = led->priv;
> > + struct led_classdev *lcdev = &fl_cdev->led_cdev;
> > + struct led_flash_setting *s = &fl_cdev->brightness;
> > + u32 enable_mask = MT6360_STROBEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
> > + u32 val = state ? MT6360_FLCSEN_MASK(led->led_no) : 0;
> > + u32 prev = priv->fled_strobe_used, curr;
> > + int ret;
> > +
> > + /* Only one set of flash control logic, use the flag to avoid torch is currently used */
> > + if (priv->fled_torch_used) {
> > + dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n", priv->fled_torch_used);
> > + return -EBUSY;
> > + }
> > +
> > + if (state)
> > + curr = prev | BIT(led->led_no);
> > + else
> > + curr = prev & ~BIT(led->led_no);
> > +
> > + if (curr)
> > + val |= MT6360_STROBEN_MASK;
>
> You need to use mutex protection consequently in all ops
> accessing device registers.
>
ACK
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, enable_mask, val);
> > + if (ret) {
> > + dev_err(lcdev->dev, "[%d] control current source %d fail\n", led->led_no, state);
> > + return ret;
> > + }
> > +
> > + /*
> > + * If the flash need to be on, config the flash current ramping up to the setting value
> > + * Else, always recover back to the minimum one
> > + */
> > + ret = _mt6360_flash_brightness_set(fl_cdev, state ? s->val : s->min);
> > + if (ret)
> > + return ret;
> > +
> > + /* For the flash turn on/off, HW rampping up/down time is 5ms/500us, respectively */
> > + if (!prev && curr)
> > + usleep_range(5000, 6000);
> > + else if (prev && !curr)
> > + udelay(500);
> > +
> > + priv->fled_strobe_used = curr;
> > + return 0;
> > +}
> > +
> > +static int mt6360_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
> > +{
> > + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> > + struct mt6360_priv *priv = led->priv;
>
> Ditto.
>
ACK
> > + *state = !!(priv->fled_strobe_used & BIT(led->led_no));
> > + return 0;
> > +}
> > +
> > +static int mt6360_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
> > +{
> > + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> > + struct mt6360_priv *priv = led->priv;
> > + struct led_flash_setting *s = &fl_cdev->timeout;
> > + u32 val = (timeout - s->min) / s->step;
>
> Ditto.
>
ACK
> > + return regmap_update_bits(priv->regmap, MT6360_REG_STRBTO, MT6360_STRBTO_MASK, val);
> > +
> > +}
> > +
> > +static int mt6360_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
> > +{
> > + struct mt6360_led *led = container_of(fl_cdev, struct mt6360_led, flash);
> > + struct mt6360_priv *priv = led->priv;
> > + u16 fled_stat;
> > + unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
> > + u32 rfault = 0;
> > + int ret;
>
> Ditto.
Fault status is read only register, should I also use mutex to protect it?
>
> > + ret = regmap_read(priv->regmap, MT6360_REG_CHGSTAT2, &chg_stat);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_raw_read(priv->regmap, MT6360_REG_FLEDSTAT1, &fled_stat, sizeof(fled_stat));
> > + if (ret)
> > + return ret;
> > +
> > + if (led->led_no == MT6360_LED_FLASH1) {
> > + strobe_timeout_mask = MT6360_FLED1STRBTO_MASK;
> > + fled_short_mask = MT6360_FLED1SHORT_MASK;
> > + } else {
> > + strobe_timeout_mask = MT6360_FLED2STRBTO_MASK;
> > + fled_short_mask = MT6360_FLED2SHORT_MASK;
> > + }
> > +
> > + if (chg_stat & MT6360_FLEDCHGVINOVP_MASK)
> > + rfault |= LED_FAULT_INPUT_VOLTAGE;
> > +
> > + if (fled_stat & strobe_timeout_mask)
> > + rfault |= LED_FAULT_TIMEOUT;
> > +
> > + if (fled_stat & fled_short_mask)
> > + rfault |= LED_FAULT_SHORT_CIRCUIT;
> > +
> > + if (fled_stat & MT6360_FLEDLVF_MASK)
> > + rfault |= LED_FAULT_UNDER_VOLTAGE;
> > +
> > + *fault = rfault;
> > + return 0;
> > +}
> > +
> > +static const struct led_flash_ops mt6360_flash_ops = {
> > + .flash_brightness_set = mt6360_flash_brightness_set,
> > + .strobe_set = mt6360_strobe_set,
> > + .strobe_get = mt6360_strobe_get,
> > + .timeout_set = mt6360_timeout_set,
> > + .fault_get = mt6360_fault_get,
> > +};
> > +
> > +static int mt6360_isnk_init_default_state(struct mt6360_led *led)
> > +{
> > + struct mt6360_priv *priv = led->priv;
> > + unsigned int regval;
> > + u32 level;
> > + int ret;
> > +
> > + ret = regmap_read(priv->regmap, MT6360_REG_ISNK(led->led_no), ®val);
> > + if (ret)
> > + return ret;
> > + level = regval & MT6360_ISNK_MASK;
> > +
> > + ret = regmap_read(priv->regmap, MT6360_REG_RGBEN, ®val);
> > + if (ret)
> > + return ret;
> > +
> > + if (!(regval & MT6360_ISNK_ENMASK(led->led_no)))
> > + level = LED_OFF;
> > +
> > + switch (led->default_state) {
> > + case STATE_ON:
> > + led->isnk.brightness = led->isnk.max_brightness;
> > + break;
> > + case STATE_KEEP:
> > + led->isnk.brightness = min(level, led->isnk.max_brightness);
> > + break;
> > + default:
> > + led->isnk.brightness = LED_OFF;
> > + }
> > +
> > + return mt6360_isnk_brightness_set(&led->isnk, led->isnk.brightness);
> > +}
> > +
> > +static int mt6360_flash_init_default_state(struct mt6360_led *led)
> > +{
> > + struct led_classdev_flash *flash = &led->flash;
> > + struct mt6360_priv *priv = led->priv;
> > + u32 enable_mask = MT6360_TORCHEN_MASK | MT6360_FLCSEN_MASK(led->led_no);
> > + u32 level;
> > + unsigned int regval;
> > + int ret;
> > +
> > + ret = regmap_read(priv->regmap, MT6360_REG_FLEDITOR(led->led_no), ®val);
> > + if (ret)
> > + return ret;
> > + level = regval & MT6360_ITORCH_MASK;
> > +
> > + ret = regmap_read(priv->regmap, MT6360_REG_FLEDEN, ®val);
> > + if (ret)
> > + return ret;
> > +
> > + if ((regval & enable_mask) == enable_mask)
> > + level += 1;
> > + else
> > + level = LED_OFF;
> > +
> > + switch (led->default_state) {
> > + case STATE_ON:
> > + flash->led_cdev.brightness = flash->led_cdev.max_brightness;
> > + break;
> > + case STATE_KEEP:
> > + flash->led_cdev.brightness = min(level, flash->led_cdev.max_brightness);
> > + break;
> > + default:
> > + flash->led_cdev.brightness = LED_OFF;
> > + }
> > +
> > + return mt6360_torch_brightness_set(&flash->led_cdev, flash->led_cdev.brightness);
> > +}
> > +
> > +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> > +static int mt6360_flash_external_strobe_set(struct v4l2_flash *v4l2_flash, bool enable)
> > +{
> > + struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> > + struct mt6360_led *led = container_of(flash, struct mt6360_led, flash);
> > + struct mt6360_priv *priv = led->priv;
> > + u32 mask = MT6360_FLCSEN_MASK(led->led_no);
> > + u32 val = enable ? mask : 0;
> > + int ret;
>
> Mutex is needed here as well.
>
ACK
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_FLEDEN, mask, val);
> > + if (ret)
> > + return ret;
> > +
> > + if (enable)
> > + priv->fled_strobe_used |= BIT(led->led_no);
> > + else
> > + priv->fled_strobe_used &= ~BIT(led->led_no);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_flash_ops v4l2_flash_ops = {
> > + .external_strobe_set = mt6360_flash_external_strobe_set,
> > +};
> > +
> > +static void mt6360_init_v4l2_config(struct mt6360_led *led, struct v4l2_flash_config *config)
>
> s/mt6360_init_v4l2_config/mt6360_init_v4l2_flash_config/
>
ACK
> > +{
> > + struct led_classdev *lcdev;
> > + struct led_flash_setting *s = &config->intensity;
> > +
>
> Multicolor LEDs don't need to be registered with V4L2.
> I've explained before that I had been misled by the fact that you name
> these LEDs as "indicators", which for flash LED controllers usually
> means something different.
>
> Please drop the code under "if" branch.
>
ACK
> > + if (led->led_no == MT6360_LED_MULTICOLOR ||
> > + (led->led_no >= MT6360_LED_ISNK1 && led->led_no <= MT6360_LED_ISNKML)) {
> > + if (led->led_no != MT6360_LED_MULTICOLOR)
> > + lcdev = &led->isnk;
> > + else
> > + lcdev = &led->mc.led_cdev;
> > +
> > + s->step = MT6360_ISNKRGB_STEPUA;
> > +
> > + if (led->led_no == MT6360_LED_ISNKML)
> > + s->step = MT6360_ISNKML_STEPUA;
> > +
> > + s->min = 0;
> > + s->val = lcdev->brightness * s->step;
> > + s->max = lcdev->max_brightness * s->step;
> > + } else {
> > + lcdev = &led->flash.led_cdev;
> > +
> > + s->min = MT6360_ITORCH_MINUA;
> > + s->step = MT6360_ITORCH_STEPUA;
> > + s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
> > +
> > + config->has_external_strobe = 1;
>
> You also need to initialize flash faults config:
>
> config>flash_faults = ....
>
> > + }
> > +
> > + strscpy(config->dev_name, lcdev->dev->kobj.name, sizeof(config->dev_name));
> > +}
> > +#else
> > +static const struct v4l2_flash_ops v4l2_flash_ops;
> > +
> > +static void mt6360_init_v4l2_config(struct mt6360_led *led, struct v4l2_flash_config *config)
> > +{
> > +}
> > +#endif
> > +
> > +static int mt6360_led_register(struct device *parent, struct mt6360_led *led,
> > + struct led_init_data *init_data)
> > +{
> > + struct mt6360_priv *priv = led->priv;
> > + struct v4l2_flash_config v4l2_config = {0};
> > + int ret;
> > +
> > + if ((led->led_no == MT6360_LED_ISNK1 || led->led_no == MT6360_LED_MULTICOLOR) &&
> > + (priv->leds_active & BIT(MT6360_LED_ISNK1))) {
> > + /* Change isink1 to SW control mode, disconnect it with charger state */
> > + ret = regmap_update_bits(priv->regmap, MT6360_REG_RGBEN, MT6360_CHRINDSEL_MASK,
> > + MT6360_CHRINDSEL_MASK);
> > + if (ret) {
> > + dev_err(parent, "Failed to config ISNK1 to SW mode\n");
> > + return ret;
> > + }
> > + }
> > +
> > + switch (led->led_no) {
> > + case MT6360_LED_MULTICOLOR:
> > + ret = mt6360_mc_brightness_set(&led->mc.led_cdev, LED_OFF);
> > + if (ret) {
> > + dev_err(parent, "Failed to init multicolor brightness\n");
> > + return ret;
> > + }
> > +
> > + ret = devm_led_classdev_multicolor_register_ext(parent, &led->mc, init_data);
> > + if (ret) {
> > + dev_err(parent, "Couldn't register multicolor\n");
> > + return ret;
> > + }
>
> Don't register this LED with V4L2.
>
ACK
> > + mt6360_init_v4l2_config(led, &v4l2_config);
> > + led->v4l2_flash = v4l2_flash_indicator_init(parent, init_data->fwnode,
> > + &led->mc.led_cdev, &v4l2_config);
> > + break;
> > + case MT6360_LED_ISNK1 ... MT6360_LED_ISNKML:
> > + ret = mt6360_isnk_init_default_state(led);
> > + if (ret) {
> > + dev_err(parent, "Failed to init %d isnk state\n", led->led_no);
> > + return ret;
> > + }
> > +
> > + ret = devm_led_classdev_register_ext(parent, &led->isnk, init_data);
> > + if (ret) {
> > + dev_err(parent, "Couldn't register isink %d\n", led->led_no);
> > + return ret;
> > + }
>
> As you've previously clarified these are not flash indicators, so no
> need to register them with V4L2.
>
ACK
> > + mt6360_init_v4l2_config(led, &v4l2_config);
> > + led->v4l2_flash = v4l2_flash_indicator_init(parent, init_data->fwnode, &led->isnk,
> > + &v4l2_config);
> > + break;
> > + default:
> > + ret = mt6360_flash_init_default_state(led);
> > + if (ret) {
> > + dev_err(parent, "Failed to init %d flash state\n", led->led_no);
> > + return ret;
> > + }
> > +
> > + ret = devm_led_classdev_flash_register_ext(parent, &led->flash, init_data);
>
> You need to add discussed no-ops for this function, or otherwise the
> compilation will break when CONFIG_LEDS_CLASS_FLASH will not be set, for
> which you now allow in your Kconfig entry.
>
ACK
> Discussed fixes for multicolor registration functions are needed as
> well. Please add the required patches at the beginning of this patch
> set.
>
Multicolor registration no-ops funciton return -EINVAL is available,
should I just fix flash device registration?
> > + if (ret) {
> > + dev_err(parent, "Couldn't register flash %d\n", led->led_no);
> > + return ret;
> > + }
> > +
> > + mt6360_init_v4l2_config(led, &v4l2_config);
> > + led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode, &led->flash,
> > + &v4l2_flash_ops, &v4l2_config);
> > + }
> > +
> > + if (IS_ERR(led->v4l2_flash)) {
> > + dev_err(parent, "Failed to register %d v4l2 sd\n", led->led_no);
> > + return PTR_ERR(led->v4l2_flash);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static u32 clamp_align(u32 val, u32 min, u32 max, u32 step)
> > +{
> > + u32 retval;
> > +
> > + retval = clamp_val(val, min, max);
> > + if (step > 1)
> > + retval = rounddown(retval - min, step) + min;
> > +
> > + return retval;
> > +}
> > +
> > +static int mt6360_init_isnk_properties(struct mt6360_led *led, struct led_init_data *init_data)
> > +{
> > + struct led_classdev *lcdev;
> > + struct mt6360_priv *priv = led->priv;
> > + struct fwnode_handle *child;
> > + u32 step_uA = MT6360_ISNKRGB_STEPUA, max_uA = MT6360_ISNKRGB_MAXUA;
> > + u32 val;
> > + int num_color = 0, ret;
> > +
> > + if (led->led_no == MT6360_LED_MULTICOLOR) {
> > + struct mc_subled *sub_led;
> > +
> > + sub_led = devm_kzalloc(priv->dev, sizeof(*sub_led) * MULTICOLOR_NUM_CHANNELS,
> > + GFP_KERNEL);
> > + if (!sub_led)
> > + return -ENOMEM;
> > +
> > + fwnode_for_each_child_node(init_data->fwnode, child) {
> > + u32 reg, color;
> > +
> > + ret = fwnode_property_read_u32(child, "reg", ®);
> > + if (ret || reg > MT6360_LED_ISNK3 || priv->leds_active & BIT(reg))
> > + return -EINVAL;
> > +
> > + ret = fwnode_property_read_u32(child, "color", &color);
> > + if (ret) {
> > + dev_err(priv->dev, "led %d, no color specified\n", led->led_no);
> > + return ret;
> > + }
> > +
> > + priv->leds_active |= BIT(reg);
> > + sub_led[num_color].color_index = color;
> > + sub_led[num_color].channel = reg;
> > + num_color++;
> > + }
> > +
> > + if (num_color < 2) {
> > + dev_err(priv->dev, "Multicolor must include 2 or more led channel\n");
> > + return -EINVAL;
> > + }
> > +
> > + led->mc.num_colors = num_color;
> > + led->mc.subled_info = sub_led;
> > +
> > + lcdev = &led->mc.led_cdev;
> > + lcdev->brightness_set_blocking = mt6360_mc_brightness_set;
> > + } else {
> > + if (led->led_no == MT6360_LED_ISNKML) {
> > + step_uA = MT6360_ISNKML_STEPUA;
> > + max_uA = MT6360_ISNKML_MAXUA;
> > + }
> > +
> > + lcdev = &led->isnk;
> > + lcdev->brightness_set_blocking = mt6360_isnk_brightness_set;
> > + }
> > +
> > + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
> > + if (ret) {
> > + dev_warn(priv->dev, "Not specified led-max-microamp, config to the minimum\n");
> > + val = step_uA;
> > + } else
> > + val = clamp_align(val, 0, max_uA, step_uA);
> > +
> > + lcdev->max_brightness = val / step_uA;
> > +
> > + fwnode_property_read_string(init_data->fwnode, "linux,default-trigger",
> > + &lcdev->default_trigger);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6360_init_flash_properties(struct mt6360_led *led, struct led_init_data *init_data)
> > +{
> > + struct led_classdev_flash *flash = &led->flash;
> > + struct led_classdev *lcdev = &flash->led_cdev;
> > + struct mt6360_priv *priv = led->priv;
> > + struct led_flash_setting *s;
> > + u32 val;
> > + int ret;
> > +
> > + ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
> > + if (ret) {
> > + dev_warn(priv->dev, "Not specified led-max-microamp, config to the minimum\n");
> > + val = MT6360_ITORCH_MINUA;
> > + } else
> > + val = clamp_align(val, MT6360_ITORCH_MINUA, MT6360_ITORCH_MAXUA,
> > + MT6360_ITORCH_STEPUA);
> > +
> > + lcdev->max_brightness = (val - MT6360_ITORCH_MINUA) / MT6360_ITORCH_STEPUA + 1;
> > + lcdev->brightness_set_blocking = mt6360_torch_brightness_set;
> > + lcdev->flags |= LED_DEV_CAP_FLASH;
> > +
> > + ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp", &val);
> > + if (ret) {
> > + dev_warn(priv->dev, "Not specified flash-max-microamp, config to the minimum\n");
> > + val = MT6360_ISTRB_MINUA;
> > + } else
> > + val = clamp_align(val, MT6360_ISTRB_MINUA, MT6360_ISTRB_MAXUA, MT6360_ISTRB_STEPUA);
> > +
> > + s = &flash->brightness;
> > + s->min = MT6360_ISTRB_MINUA;
> > + s->step = MT6360_ISTRB_STEPUA;
> > + s->val = s->max = val;
> > +
> > + /* Always configure as min level when off to prevent flash current spike */
> > + ret = _mt6360_flash_brightness_set(flash, s->min);
> > + if (ret)
> > + return ret;
> > +
> > + ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-timeout-us", &val);
> > + if (ret) {
> > + dev_warn(priv->dev, "Not specified flash-max-timeout-us, config to the minimum\n");
> > + val = MT6360_STRBTO_MINUS;
> > + } else
> > + val = clamp_align(val, MT6360_STRBTO_MINUS, MT6360_STRBTO_MAXUS,
> > + MT6360_STRBTO_STEPUS);
> > +
> > + s = &flash->timeout;
> > + s->min = MT6360_STRBTO_MINUS;
> > + s->step = MT6360_STRBTO_STEPUS;
> > + s->val = s->max = val;
> > +
> > + flash->ops = &mt6360_flash_ops;
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6360_init_common_properties(struct mt6360_led *led, struct led_init_data *init_data)
> > +{
> > + const char * const states[] = { "off", "keep", "on" };
> > + const char *str;
> > + int ret;
> > +
> > + if (!fwnode_property_read_string(init_data->fwnode, "default-state", &str)) {
> > + ret = match_string(states, ARRAY_SIZE(states), str);
> > + if (ret < 0)
> > + ret = STATE_OFF;
> > +
> > + led->default_state = ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void mt6360_v4l2_flash_release(struct mt6360_priv *priv)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < priv->leds_count; i++) {
> > + struct mt6360_led *led = priv->leds + i;
> > +
> > + if (led->v4l2_flash)
> > + v4l2_flash_release(led->v4l2_flash);
> > +
> > + }
> > +}
> > +
> > +static int mt6360_led_probe(struct platform_device *pdev)
> > +{
> > + struct mt6360_priv *priv;
> > + struct fwnode_handle *child;
> > + size_t count;
> > + int i = 0, ret;
> > +
> > + count = device_get_child_node_count(&pdev->dev);
> > + if (!count || count > MT6360_MAX_LEDS) {
> > + dev_err(&pdev->dev, "No child node or node count over max led number %lu\n", count);
> > + return -EINVAL;
> > + }
> > +
> > + priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->leds_count = count;
> > + priv->dev = &pdev->dev;
> > + mutex_init(&priv->lock);
> > +
> > + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > + if (!priv->regmap) {
> > + dev_err(&pdev->dev, "Failed to get parent regmap\n");
> > + return -ENODEV;
> > + }
> > +
> > + device_for_each_child_node(&pdev->dev, child) {
> > + struct mt6360_led *led = priv->leds + i;
> > + struct led_init_data init_data = { .fwnode = child, };
> > + u32 reg;
> > +
> > + ret = fwnode_property_read_u32(child, "reg", ®);
> > + if (ret)
> > + goto out_flash_release;
> > +
> > + if (reg > MT6360_MAX_LEDS || priv->leds_active & BIT(reg))
> > + return -EINVAL;
> > + priv->leds_active |= BIT(reg);
> > +
> > + led->led_no = reg;
> > + led->priv = priv;
> > +
> > + ret = mt6360_init_common_properties(led, &init_data);
> > + if (ret)
> > + goto out_flash_release;
> > +
> > + if (reg == MT6360_LED_MULTICOLOR ||
> > + (reg >= MT6360_LED_ISNK1 && reg <= MT6360_LED_ISNKML))
> > + ret = mt6360_init_isnk_properties(led, &init_data);
> > + else
> > + ret = mt6360_init_flash_properties(led, &init_data);
> > +
> > + if (ret)
> > + goto out_flash_release;
> > +
> > + ret = mt6360_led_register(&pdev->dev, led, &init_data);
> > + if (ret)
> > + goto out_flash_release;
> > +
> > + i++;
> > + }
> > +
> > + platform_set_drvdata(pdev, priv);
> > + return 0;
> > +
> > +out_flash_release:
> > + mt6360_v4l2_flash_release(priv);
> > + return ret;
> > +}
> > +
> > +static int mt6360_led_remove(struct platform_device *pdev)
> > +{
> > + struct mt6360_priv *priv = platform_get_drvdata(pdev);
> > +
> > + mt6360_v4l2_flash_release(priv);
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id __maybe_unused mt6360_led_of_id[] = {
> > + { .compatible = "mediatek,mt6360-led", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6360_led_of_id);
> > +
> > +static struct platform_driver mt6360_led_driver = {
> > + .driver = {
> > + .name = "mt6360-led",
> > + .of_match_table = mt6360_led_of_id,
> > + },
> > + .probe = mt6360_led_probe,
> > + .remove = mt6360_led_remove,
> > +};
> > +module_platform_driver(mt6360_led_driver);
> > +
> > +MODULE_AUTHOR("Gene Chen <[email protected]>");
> > +MODULE_DESCRIPTION("MT6360 LED Driver");
> > +MODULE_LICENSE("GPL v2");
> >
>
> --
> Best regards,
> Jacek Anaszewski
Jacek Anaszewski <[email protected]> 於 2020年11月18日 週三 上午6:24寫道：
>
> Hi Gene,
>
> Thank you for the patch.
>
> On 11/17/20 11:55 AM, Gene Chen wrote:
> > From: Gene Chen <[email protected]>
> >
> > Add bindings document for LED support on MT6360 PMIC
> >
> > Signed-off-by: Gene Chen <[email protected]>
> > ---
> > .../devicetree/bindings/leds/leds-mt6360.yaml | 114 +++++++++++++++++++++
> > 1 file changed, 114 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6360.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
> > new file mode 100644
> > index 0000000..871db4d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
> > @@ -0,0 +1,114 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: LED driver for MT6360 PMIC from MediaTek Integrated.
> > +
> > +maintainers:
> > + - Gene Chen <[email protected]>
> > +
> > +description: |
> > + This module is part of the MT6360 MFD device.
> > + see Documentation/devicetree/bindings/mfd/mt6360.yaml
> > + Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
> > + and 4-channel RGB LED support Register/Flash/Breath Mode
>
> What actually is the Register mode?
>
Register mode is equal to S/W mode.
Red LED indicator ic default is H/W mode. LED enable when charger plug in.
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt6360-led
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > +patternProperties:
> > + "^led@[0-6]$":
> > + type: object
> > + $ref: common.yaml#
> > + description:
> > + Properties for a single LED.
> > +
> > + properties:
> > + reg:
> > + description: Index of the LED.
> > + enum:
> > + - 0 # LED output INDICATOR1_RED
> > + - 1 # LED output INDICATOR1_GREEN
> > + - 2 # LED output INDICATOR1_BLUE
> > + - 3 # LED output INDICATOR2_ML
> > + - 4 # LED output FLED1
> > + - 5 # LED output FLED2
> > + - 6 # LED output MULTICOLOR
> > +
> > +unevaluatedProperties: false
> > +
> > +required:
> > + - compatible
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/leds/common.h>
> > + led-controller {
> > + compatible = "mediatek,mt6360-led";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + led@0 {
> > + reg = <0>;
> > + function = LED_FUNCTION_INDICATOR;
> > + color = <LED_COLOR_ID_RED>;
> > + led-max-microamp = <24000>;
> > + };
> > + led@3 {
> > + reg = <3>;
> > + function = LED_FUNCTION_INDICATOR;
> > + color = <LED_COLOR_ID_AMBER>;
>
> You should really have here LED_COLOR_ID_MOONLIGHT if this is
> a moonlight LED. You'll need to add it to dt-bindings/leds/common.h.
>
> > + led-max-microamp = <150000>;
> > + };
> > + led@4 {
> > + reg = <4>;
> > + function = LED_FUNCTION_FLASH;
> > + color = <LED_COLOR_ID_WHITE>;
> > + function-enumerator = <1>;
> > + led-max-microamp = <200000>;
> > + flash-max-microamp = <500000>;
> > + flash-max-timeout-us = <1024000>;
> > + };
> > + led@5 {
> > + reg = <5>;
> > + function = LED_FUNCTION_FLASH;
> > + color = <LED_COLOR_ID_WHITE>;
> > + function-enumerator = <2>;
> > + led-max-microamp = <200000>;
> > + flash-max-microamp = <500000>;
> > + flash-max-timeout-us = <1024000>;
> > + };
> > + led@6 {
> > + reg = <6>;
> > + function = LED_FUNCTION_INDICATOR;
> > + color = <LED_COLOR_ID_MULTI>;
> > + led-max-microamp = <24000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + led@1 {
> > + reg = <1>;
> > + function = LED_FUNCTION_INDICATOR;
> > + color = <LED_COLOR_ID_GREEN>;
> > + };
> > + led@2 {
> > + reg = <2>;
> > + function = LED_FUNCTION_INDICATOR;
> > + color = <LED_COLOR_ID_BLUE>;
> > + };
> > + };
>
> It is of little avail to have multicolor LED with only two LEDs.
> I propose not to allow such setup - i.e. you should have either
> one multicolor LED comprising three sub-LEDs (regs: 0, 1, 2),
> and with main color property set to LED_COLOR_ID_RGB, or three separate
> LEDs.
>
> Effectively, you should have two separate DT examples here to make it
> clear: one for the case with three LED class devices and one with
> LED multicolor class device.
>
ACK
> > + };
> > +...
> >
>
> --
> Best regards,
> Jacek Anaszewski