This patch adds the driver data for two rt1011 speaker amplifiers on
SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Signed-off-by: Brent Lu <[email protected]>
---
sound/soc/intel/boards/Kconfig | 1 +
sound/soc/intel/boards/Makefile | 2 +-
sound/soc/intel/boards/sof_realtek_common.c | 138 ++++++++++++++++++
sound/soc/intel/boards/sof_realtek_common.h | 24 +++
sound/soc/intel/boards/sof_rt5682.c | 26 +++-
.../intel/common/soc-acpi-intel-tgl-match.c | 17 ++-
6 files changed, 201 insertions(+), 7 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_realtek_common.c
create mode 100644 sound/soc/intel/boards/sof_realtek_common.h
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index dddb672a6d55..b58b9b60d37e 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -443,6 +443,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH
(MFD_INTEL_LPSS || COMPILE_TEST)) ||\
(SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
select SND_SOC_MAX98373_I2C
+ select SND_SOC_RT1011
select SND_SOC_RT1015
select SND_SOC_RT5682_I2C
select SND_SOC_DMIC
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index a58e4d22e9c8..5f03e484b215 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -18,7 +18,7 @@ snd-soc-sst-byt-cht-cx2072x-objs := bytcht_cx2072x.o
snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
-snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o
+snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o sof_realtek_common.o
snd-soc-cml_rt1011_rt5682-objs := cml_rt1011_rt5682.o hda_dsp_common.o
snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o
diff --git a/sound/soc/intel/boards/sof_realtek_common.c b/sound/soc/intel/boards/sof_realtek_common.c
new file mode 100644
index 000000000000..f3cf73c620ba
--- /dev/null
+++ b/sound/soc/intel/boards/sof_realtek_common.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+#include <uapi/sound/asound.h>
+#include "../../codecs/rt1011.h"
+#include "sof_realtek_common.h"
+
+/*
+ * Current only 2-amp configuration is supported for rt1011
+ */
+static const struct snd_soc_dapm_route rt1011_dapm_routes[] = {
+ /* speaker */
+ { "Left Spk", NULL, "Left SPO" },
+ { "Right Spk", NULL, "Right SPO" },
+};
+
+/*
+ * Make sure device's Unique ID follows this configuration:
+ *
+ * Two speakers:
+ * 0: left, 1: right
+ * Four speakers:
+ * 0: Woofer left, 1: Woofer right
+ * 2: Tweeter left, 3: Tweeter right
+ */
+static struct snd_soc_codec_conf rt1011_codec_confs[] = {
+ {
+ .dlc = COMP_CODEC_CONF(RT1011_DEV0_NAME),
+ .name_prefix = "Left",
+ },
+ {
+ .dlc = COMP_CODEC_CONF(RT1011_DEV1_NAME),
+ .name_prefix = "Right",
+ },
+};
+
+static struct snd_soc_dai_link_component rt1011_dai_link_components[] = {
+ {
+ .name = RT1011_DEV0_NAME,
+ .dai_name = RT1011_CODEC_DAI,
+ },
+ {
+ .name = RT1011_DEV1_NAME,
+ .dai_name = RT1011_CODEC_DAI,
+ },
+};
+
+static const struct {
+ unsigned int tx;
+ unsigned int rx;
+} rt1011_tdm_mask[] = {
+ {.tx = 0x4, .rx = 0x1},
+ {.tx = 0x8, .rx = 0x2},
+};
+
+static int rt1011_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+ struct snd_soc_dai *codec_dai;
+ int srate, i, ret = 0;
+
+ srate = params_rate(params);
+
+ for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ /* 100 Fs to drive 24 bit data */
+ ret = snd_soc_dai_set_pll(codec_dai, 0, RT1011_PLL1_S_BCLK,
+ 100 * srate, 256 * srate);
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "fail to set pll, ret %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT1011_FS_SYS_PRE_S_PLL1,
+ 256 * srate, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "fail to set sysclk, ret %d\n",
+ ret);
+ return ret;
+ }
+
+ if (i >= ARRAY_SIZE(rt1011_tdm_mask)) {
+ dev_err(codec_dai->dev, "invalid codec index %d\n",
+ i);
+ return -ENODEV;
+ }
+
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, rt1011_tdm_mask[i].tx,
+ rt1011_tdm_mask[i].rx, 4,
+ params_width(params));
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "fail to set tdm slot, ret %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_ops rt1011_ops = {
+ .hw_params = rt1011_hw_params,
+};
+
+static int rt1011_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ int ret;
+
+ ret = snd_soc_dapm_add_routes(&card->dapm, rt1011_dapm_routes,
+ ARRAY_SIZE(rt1011_dapm_routes));
+ if (ret)
+ dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+ return ret;
+}
+
+void sof_rt1011_dai_link(struct snd_soc_dai_link *link)
+{
+ link->codecs = rt1011_dai_link_components;
+ link->num_codecs = ARRAY_SIZE(rt1011_dai_link_components);
+ link->init = rt1011_init;
+ link->ops = &rt1011_ops;
+}
+
+void sof_rt1011_codec_conf(struct snd_soc_card *card)
+{
+ card->codec_conf = rt1011_codec_confs;
+ card->num_configs = ARRAY_SIZE(rt1011_codec_confs);
+}
diff --git a/sound/soc/intel/boards/sof_realtek_common.h b/sound/soc/intel/boards/sof_realtek_common.h
new file mode 100644
index 000000000000..87cb3812b926
--- /dev/null
+++ b/sound/soc/intel/boards/sof_realtek_common.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+/*
+ * This file defines data structures used in Machine Driver for Intel
+ * platforms with Realtek Codecs.
+ */
+#ifndef __SOF_REALTEK_COMMON_H
+#define __SOF_REALTEK_COMMON_H
+
+#include <sound/soc.h>
+
+#define RT1011_CODEC_DAI "rt1011-aif"
+#define RT1011_DEV0_NAME "i2c-10EC1011:00"
+#define RT1011_DEV1_NAME "i2c-10EC1011:01"
+#define RT1011_DEV2_NAME "i2c-10EC1011:02"
+#define RT1011_DEV3_NAME "i2c-10EC1011:03"
+
+void sof_rt1011_dai_link(struct snd_soc_dai_link *link);
+void sof_rt1011_codec_conf(struct snd_soc_card *card);
+
+#endif /* __SOF_REALTEK_COMMON_H */
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index 891f908659f5..8b1ca2da9bb9 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -24,6 +24,7 @@
#include "../common/soc-intel-quirks.h"
#include "hda_dsp_common.h"
#include "sof_maxim_common.h"
+#include "sof_realtek_common.h"
#define NAME_SIZE 32
@@ -41,10 +42,11 @@
#define SOF_RT5682_NUM_HDMIDEV_MASK (GENMASK(12, 10))
#define SOF_RT5682_NUM_HDMIDEV(quirk) \
((quirk << SOF_RT5682_NUM_HDMIDEV_SHIFT) & SOF_RT5682_NUM_HDMIDEV_MASK)
-#define SOF_RT1015_SPEAKER_AMP_PRESENT BIT(13)
-#define SOF_RT1015_SPEAKER_AMP_100FS BIT(14)
-#define SOF_MAX98373_SPEAKER_AMP_PRESENT BIT(15)
-#define SOF_MAX98360A_SPEAKER_AMP_PRESENT BIT(16)
+#define SOF_RT1011_SPEAKER_AMP_PRESENT BIT(13)
+#define SOF_RT1015_SPEAKER_AMP_PRESENT BIT(14)
+#define SOF_RT1015_SPEAKER_AMP_100FS BIT(15)
+#define SOF_MAX98373_SPEAKER_AMP_PRESENT BIT(16)
+#define SOF_MAX98360A_SPEAKER_AMP_PRESENT BIT(17)
/* Default: MCLK on, MCLK 19.2M, SSP0 */
static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -741,6 +743,9 @@ static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
links[id].codecs = max98360a_component;
links[id].num_codecs = ARRAY_SIZE(max98360a_component);
links[id].init = speaker_codec_init;
+ } else if (sof_rt5682_quirk &
+ SOF_RT1011_SPEAKER_AMP_PRESENT) {
+ sof_rt1011_dai_link(&links[id]);
} else {
links[id].codecs = max98357a_component;
links[id].num_codecs = ARRAY_SIZE(max98357a_component);
@@ -851,6 +856,8 @@ static int sof_audio_probe(struct platform_device *pdev)
if (sof_rt5682_quirk & SOF_MAX98373_SPEAKER_AMP_PRESENT)
sof_max98373_codec_conf(&sof_audio_card_rt5682);
+ else if (sof_rt5682_quirk & SOF_RT1011_SPEAKER_AMP_PRESENT)
+ sof_rt1011_codec_conf(&sof_audio_card_rt5682);
dai_links = sof_card_dai_links_create(&pdev->dev, ssp_codec, ssp_amp,
dmic_be_num, hdmi_num);
@@ -931,6 +938,15 @@ static const struct platform_device_id board_ids[] = {
SOF_RT1015_SPEAKER_AMP_100FS |
SOF_RT5682_SSP_AMP(1)),
},
+ {
+ .name = "tgl_rt1011_rt5682",
+ .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
+ SOF_RT5682_SSP_CODEC(0) |
+ SOF_SPEAKER_AMP_PRESENT |
+ SOF_RT1011_SPEAKER_AMP_PRESENT |
+ SOF_RT5682_SSP_AMP(1) |
+ SOF_RT5682_NUM_HDMIDEV(4)),
+ },
{ }
};
@@ -948,6 +964,7 @@ module_platform_driver(sof_audio)
MODULE_DESCRIPTION("SOF Audio Machine driver");
MODULE_AUTHOR("Bard Liao <[email protected]>");
MODULE_AUTHOR("Sathya Prakash M R <[email protected]>");
+MODULE_AUTHOR("Brent Lu <[email protected]>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sof_rt5682");
MODULE_ALIAS("platform:tgl_max98357a_rt5682");
@@ -955,3 +972,4 @@ MODULE_ALIAS("platform:jsl_rt5682_rt1015");
MODULE_ALIAS("platform:tgl_max98373_rt5682");
MODULE_ALIAS("platform:jsl_rt5682_max98360a");
MODULE_ALIAS("platform:cml_rt1015_rt5682");
+MODULE_ALIAS("platform:tgl_rt1011_rt5682");
diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
index 9f243e60b95c..98196e9fad62 100644
--- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
@@ -9,7 +9,7 @@
#include <sound/soc-acpi.h>
#include <sound/soc-acpi-intel-match.h>
-static struct snd_soc_acpi_codecs tgl_codecs = {
+static const struct snd_soc_acpi_codecs tgl_codecs = {
.num_codecs = 1,
.codecs = {"MX98357A"}
};
@@ -305,11 +305,16 @@ static const struct snd_soc_acpi_link_adr tgl_3_in_1_sdca[] = {
{}
};
-static struct snd_soc_acpi_codecs tgl_max98373_amp = {
+static const struct snd_soc_acpi_codecs tgl_max98373_amp = {
.num_codecs = 1,
.codecs = {"MX98373"}
};
+static const struct snd_soc_acpi_codecs tgl_rt1011_amp = {
+ .num_codecs = 1,
+ .codecs = {"10EC1011"}
+};
+
struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
{
.id = "10EC1308",
@@ -335,6 +340,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
.sof_fw_filename = "sof-tgl.ri",
.sof_tplg_filename = "sof-tgl-max98373-rt5682.tplg",
},
+ {
+ .id = "10EC5682",
+ .drv_name = "tgl_rt1011_rt5682",
+ .machine_quirk = snd_soc_acpi_codec_list,
+ .quirk_data = &tgl_rt1011_amp,
+ .sof_fw_filename = "sof-tgl.ri",
+ .sof_tplg_filename = "sof-tgl-rt1011-rt5682.tplg",
+ },
{},
};
EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_tgl_machines);
--
2.17.1
On 12/3/20 9:40 AM, Brent Lu wrote:
> This patch adds the driver data for two rt1011 speaker amplifiers on
> SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
> leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
>
> Signed-off-by: Brent Lu <[email protected]>
Thanks Brent.
Acked-by: Pierre-Louis Bossart <[email protected]>
On Thu, 3 Dec 2020 23:40:10 +0800, Brent Lu wrote:
> This patch adds the driver data for two rt1011 speaker amplifiers on
> SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
> leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: intel: sof_rt5682: Add support for tgl_rt1011_rt5682
commit: aa6cc97c0ac31c668afc7027bcf2bdb0fe4610fe
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark