Tegra VI/CSI hardware don't have native 8 lane CSI RX port.
But x8 capture can be supported by using consecutive x4 ports
simultaneously with HDMI-to-CSI bridges where source image is split
on to two x4 ports.
This patch updates dt-bindings for csi endpoint data-lane property
with maximum of 8 lanes.
Acked-by: Rob Herring <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
.../devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 34d9933..8a6d3e1 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -111,8 +111,8 @@ of the following host1x client modules:
endpoint (required node)
Required properties:
- - data-lanes: an array of data lane from 1 to 4. Valid array
- lengths are 1/2/4.
+ - data-lanes: an array of data lane from 1 to 8. Valid array
+ lengths are 1/2/4/8.
- remote-endpoint: phandle to sensor 'endpoint' node.
port@1 (required node)
--
2.7.4