2003-06-17 08:14:09

by CAMTP guest

[permalink] [raw]
Subject: CMD680 missing from 2.4.21?

Was CMD680 support forgotten in 2.4.21 or am I missing
something? In 2.4.19 and .20 I get:

CMD680: IDE controller on PCI bus 00 dev 58
CMD680: chipset revision 1
CMD680: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio

in 2.4.21 it is not detected (same config). I have found
two related entries in ChangeLog:

ChangeLog-2.4.20:
Adrian Bunk <[email protected]>:
o document that cmd64x.c supports the CMD649 and CMD680

ChangeLog-2.4.21:
Alan Cox <[email protected]>:
o fix wrong clocking selection on CMD680/SII3112

-Igor Mozetic


Subject: Re: CMD680 missing from 2.4.21?


On Tue, 17 Jun 2003, CAMTP guest wrote:

> Was CMD680 support forgotten in 2.4.21 or am I missing
> something? In 2.4.19 and .20 I get:
>
> CMD680: IDE controller on PCI bus 00 dev 58
> CMD680: chipset revision 1
> CMD680: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
>
> in 2.4.21 it is not detected (same config). I have found

Sometimes config options change :-).
CONFIG_BLK_DEV_SIIMAGE=y

Regards,
--
Bartlomiej