On Mon, 25 Jan 2021 19:12:21 +0800, Xin Ji wrote:
> Add 'bus-type' and 'data-lanes' define for port0, add HDCP support
> flag and DP tx lane0 and lane1 swing register array define.
>
> Signed-off-by: Xin Ji <[email protected]>
> ---
> .../bindings/display/bridge/analogix,anx7625.yaml | 57 ++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 3 deletions(-)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.example.dt.yaml: encoder@58: ports: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.example.dt.yaml: encoder@58: ports:port@1:endpoint: Additional properties are not allowed ('remote-endpoint' was unexpected)
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
See https://patchwork.ozlabs.org/patch/1431199
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On Mon, Jan 25, 2021 at 08:51:35AM -0600, Rob Herring wrote:
> On Mon, 25 Jan 2021 19:12:21 +0800, Xin Ji wrote:
> > Add 'bus-type' and 'data-lanes' define for port0, add HDCP support
> > flag and DP tx lane0 and lane1 swing register array define.
> >
> > Signed-off-by: Xin Ji <[email protected]>
> > ---
> > .../bindings/display/bridge/analogix,anx7625.yaml | 57 ++++++++++++++++++++--
> > 1 file changed, 54 insertions(+), 3 deletions(-)
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
Hi Rob, OK, I'll fix it in the next serial.
Thanks,
Xin
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.example.dt.yaml: encoder@58: ports: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
> From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.example.dt.yaml: encoder@58: ports:port@1:endpoint: Additional properties are not allowed ('remote-endpoint' was unexpected)
> From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
>
> See https://patchwork.ozlabs.org/patch/1431199
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.