Convert pm8xxx rtc bindings from .txt to .yaml format.
Signed-off-by: satya priya <[email protected]>
---
.../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 -------------------
.../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 +++++++++++++++++++++
2 files changed, 108 insertions(+), 99 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
deleted file mode 100644
index 9e5eba4..0000000
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm PM8xxx PMIC multi-function devices
-
-The PM8xxx family of Power Management ICs are used to provide regulated
-voltages and other various functionality to Qualcomm SoCs.
-
-= PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8058"
- "qcom,pm8821"
- "qcom,pm8921"
-
-- #address-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 1
-
-- #size-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 0
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: specifies the interrupt that indicates a subdevice
- has generated an interrupt (summary interrupt). The
- format of the specifier is defined by the binding document
- describing the node's interrupt parent.
-
-- #interrupt-cells:
- Usage: required
- Value type : <u32>
- Definition: must be 2. Specifies the number of cells needed to encode
- an interrupt source. The 1st cell contains the interrupt
- number. The 2nd cell is the trigger type and level flags
- encoded as follows:
-
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered
- 4 = active high level-sensitive
- 8 = active low level-sensitive
-
-- interrupt-controller:
- Usage: required
- Value type: <empty>
- Definition: identifies this node as an interrupt controller
-
-= SUBCOMPONENTS
-
-The PMIC contains multiple independent functions, each described in a subnode.
-The below bindings specify the set of valid subnodes.
-
-== Real-Time Clock
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8058-rtc"
- "qcom,pm8921-rtc"
- "qcom,pm8941-rtc"
- "qcom,pm8018-rtc"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: single entry specifying the base address of the RTC registers
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: single entry specifying the RTC's alarm interrupt
-
-- allow-set-time:
- Usage: optional
- Value type: <empty>
- Definition: indicates that the setting of RTC time is allowed by
- the host CPU
-
-= EXAMPLE
-
- pmicintc: pmic@0 {
- compatible = "qcom,pm8921";
- interrupts = <104 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- reg = <0x11d>;
- interrupts = <0x27 0>;
- };
- };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
new file mode 100644
index 0000000..b4892f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC multi-function devices
+
+maintainers:
+ - Lee Jones <[email protected]>
+
+description: |
+ The PM8xxx family of Power Management ICs are used to provide regulated
+ voltages and other various functionality to Qualcomm SoCs.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8058
+ - qcom,pm8821
+ - qcom,pm8921
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts:
+ description: |
+ Specifies the interrupt that indicates a subdevice has generated an
+ interrupt (summary interrupt).
+
+ '#interrupt-cells':
+ description: |
+ Specifies the number of cells needed to encode an interrupt source.
+ The 1st cell contains the interrupt number. The 2nd cell is the
+ trigger type.
+ const: 2
+
+ interrupt-controller: true
+
+patternProperties:
+ "rtc@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,pm8058-rtc
+ - qcom,pm8921-rtc
+ - qcom,pm8941-rtc
+ - qcom,pm8018-rtc
+
+ reg:
+ description: Specifies the base address of the RTC registers
+
+ interrupts:
+ description: Specifies the RTC's alarm interrupts
+
+ allow-set-time:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that the setting of RTC time is allowed by the host CPU.
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - interrupts
+ - '#interrupt-cells'
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/spmi/spmi.h>
+ spmi_bus: spmi@c440000 {
+ reg = <0x0c440000 0x1100>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ pmicintc: pmic@0 {
+ reg = <0x0 SPMI_USID>;
+ compatible = "qcom,pm8921";
+ interrupts = <104 8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_rtc: rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ reg = <0x11d>;
+ interrupts = <0x27 0>;
+ };
+ };
+ };
+...
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
On Thu, 11 Mar 2021 12:59:57 +0530, satya priya wrote:
> Convert pm8xxx rtc bindings from .txt to .yaml format.
>
> Signed-off-by: satya priya <[email protected]>
> ---
> .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 -------------------
> .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 +++++++++++++++++++++
> 2 files changed, 108 insertions(+), 99 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml:27:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
./Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml:30:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1450975
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
> Convert pm8xxx rtc bindings from .txt to .yaml format.
>
Wonderful initiative, thank you!
> Signed-off-by: satya priya <[email protected]>
> ---
> .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 -------------------
> .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 +++++++++++++++++++++
> 2 files changed, 108 insertions(+), 99 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> deleted file mode 100644
> index 9e5eba4..0000000
> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> +++ /dev/null
> @@ -1,99 +0,0 @@
> -Qualcomm PM8xxx PMIC multi-function devices
> -
> -The PM8xxx family of Power Management ICs are used to provide regulated
> -voltages and other various functionality to Qualcomm SoCs.
> -
> -= PROPERTIES
> -
> -- compatible:
> - Usage: required
> - Value type: <string>
> - Definition: must be one of:
> - "qcom,pm8058"
> - "qcom,pm8821"
> - "qcom,pm8921"
> -
> -- #address-cells:
> - Usage: required
> - Value type: <u32>
> - Definition: must be 1
> -
> -- #size-cells:
> - Usage: required
> - Value type: <u32>
> - Definition: must be 0
> -
> -- interrupts:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: specifies the interrupt that indicates a subdevice
> - has generated an interrupt (summary interrupt). The
> - format of the specifier is defined by the binding document
> - describing the node's interrupt parent.
> -
> -- #interrupt-cells:
> - Usage: required
> - Value type : <u32>
> - Definition: must be 2. Specifies the number of cells needed to encode
> - an interrupt source. The 1st cell contains the interrupt
> - number. The 2nd cell is the trigger type and level flags
> - encoded as follows:
> -
> - 1 = low-to-high edge triggered
> - 2 = high-to-low edge triggered
> - 4 = active high level-sensitive
> - 8 = active low level-sensitive
> -
> -- interrupt-controller:
> - Usage: required
> - Value type: <empty>
> - Definition: identifies this node as an interrupt controller
> -
> -= SUBCOMPONENTS
> -
> -The PMIC contains multiple independent functions, each described in a subnode.
> -The below bindings specify the set of valid subnodes.
> -
> -== Real-Time Clock
> -
> -- compatible:
> - Usage: required
> - Value type: <string>
> - Definition: must be one of:
> - "qcom,pm8058-rtc"
> - "qcom,pm8921-rtc"
> - "qcom,pm8941-rtc"
> - "qcom,pm8018-rtc"
> -
> -- reg:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: single entry specifying the base address of the RTC registers
> -
> -- interrupts:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: single entry specifying the RTC's alarm interrupt
> -
> -- allow-set-time:
> - Usage: optional
> - Value type: <empty>
> - Definition: indicates that the setting of RTC time is allowed by
> - the host CPU
> -
> -= EXAMPLE
> -
> - pmicintc: pmic@0 {
> - compatible = "qcom,pm8921";
> - interrupts = <104 8>;
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - rtc@11d {
> - compatible = "qcom,pm8921-rtc";
> - reg = <0x11d>;
> - interrupts = <0x27 0>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> new file mode 100644
> index 0000000..b4892f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PM8xxx PMIC multi-function devices
> +
> +maintainers:
> + - Lee Jones <[email protected]>
While Lee is maintainer of the mfd core, it would be better if this was
someone looking out for the Qualcomm PMIC binding specifically.
> +
> +description: |
> + The PM8xxx family of Power Management ICs are used to provide regulated
> + voltages and other various functionality to Qualcomm SoCs.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,pm8058
> + - qcom,pm8821
> + - qcom,pm8921
> +
> + reg:
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + interrupts:
> + description: |
> + Specifies the interrupt that indicates a subdevice has generated an
> + interrupt (summary interrupt).
> +
> + '#interrupt-cells':
> + description: |
> + Specifies the number of cells needed to encode an interrupt source.
> + The 1st cell contains the interrupt number. The 2nd cell is the
> + trigger type.
> + const: 2
> +
> + interrupt-controller: true
> +
> +patternProperties:
> + "rtc@[0-9a-f]+$":
Can we somehow link this to individual binding docs instead of listing
all the possible functions here?
Regards,
Bjorn
> + type: object
> + properties:
> + compatible:
> + enum:
> + - qcom,pm8058-rtc
> + - qcom,pm8921-rtc
> + - qcom,pm8941-rtc
> + - qcom,pm8018-rtc
> +
> + reg:
> + description: Specifies the base address of the RTC registers
> +
> + interrupts:
> + description: Specifies the RTC's alarm interrupts
> +
> + allow-set-time:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Indicates that the setting of RTC time is allowed by the host CPU.
> +
> + required:
> + - compatible
> + - reg
> + - interrupts
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - '#address-cells'
> + - '#size-cells'
> + - interrupts
> + - '#interrupt-cells'
> + - interrupt-controller
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/spmi/spmi.h>
> + spmi_bus: spmi@c440000 {
> + reg = <0x0c440000 0x1100>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + pmicintc: pmic@0 {
> + reg = <0x0 SPMI_USID>;
> + compatible = "qcom,pm8921";
> + interrupts = <104 8>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8921_rtc: rtc@11d {
> + compatible = "qcom,pm8921-rtc";
> + reg = <0x11d>;
> + interrupts = <0x27 0>;
> + };
> + };
> + };
> +...
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
Hi Bjorn,
On 2021-03-11 22:33, Bjorn Andersson wrote:
> On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
>
>> Convert pm8xxx rtc bindings from .txt to .yaml format.
>>
>
> Wonderful initiative, thank you!
>
>> Signed-off-by: satya priya <[email protected]>
>> ---
>> .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99
>> -------------------
>> .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108
>> +++++++++++++++++++++
>> 2 files changed, 108 insertions(+), 99 deletions(-)
>> delete mode 100644
>> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>> create mode 100644
>> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>> b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>> deleted file mode 100644
>> index 9e5eba4..0000000
>> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>> +++ /dev/null
>> @@ -1,99 +0,0 @@
>> -Qualcomm PM8xxx PMIC multi-function devices
>> -
>> -The PM8xxx family of Power Management ICs are used to provide
>> regulated
>> -voltages and other various functionality to Qualcomm SoCs.
>> -
>> -= PROPERTIES
>> -
>> -- compatible:
>> - Usage: required
>> - Value type: <string>
>> - Definition: must be one of:
>> - "qcom,pm8058"
>> - "qcom,pm8821"
>> - "qcom,pm8921"
>> -
>> -- #address-cells:
>> - Usage: required
>> - Value type: <u32>
>> - Definition: must be 1
>> -
>> -- #size-cells:
>> - Usage: required
>> - Value type: <u32>
>> - Definition: must be 0
>> -
>> -- interrupts:
>> - Usage: required
>> - Value type: <prop-encoded-array>
>> - Definition: specifies the interrupt that indicates a subdevice
>> - has generated an interrupt (summary interrupt). The
>> - format of the specifier is defined by the binding document
>> - describing the node's interrupt parent.
>> -
>> -- #interrupt-cells:
>> - Usage: required
>> - Value type : <u32>
>> - Definition: must be 2. Specifies the number of cells needed to
>> encode
>> - an interrupt source. The 1st cell contains the interrupt
>> - number. The 2nd cell is the trigger type and level flags
>> - encoded as follows:
>> -
>> - 1 = low-to-high edge triggered
>> - 2 = high-to-low edge triggered
>> - 4 = active high level-sensitive
>> - 8 = active low level-sensitive
>> -
>> -- interrupt-controller:
>> - Usage: required
>> - Value type: <empty>
>> - Definition: identifies this node as an interrupt controller
>> -
>> -= SUBCOMPONENTS
>> -
>> -The PMIC contains multiple independent functions, each described in a
>> subnode.
>> -The below bindings specify the set of valid subnodes.
>> -
>> -== Real-Time Clock
>> -
>> -- compatible:
>> - Usage: required
>> - Value type: <string>
>> - Definition: must be one of:
>> - "qcom,pm8058-rtc"
>> - "qcom,pm8921-rtc"
>> - "qcom,pm8941-rtc"
>> - "qcom,pm8018-rtc"
>> -
>> -- reg:
>> - Usage: required
>> - Value type: <prop-encoded-array>
>> - Definition: single entry specifying the base address of the RTC
>> registers
>> -
>> -- interrupts:
>> - Usage: required
>> - Value type: <prop-encoded-array>
>> - Definition: single entry specifying the RTC's alarm interrupt
>> -
>> -- allow-set-time:
>> - Usage: optional
>> - Value type: <empty>
>> - Definition: indicates that the setting of RTC time is allowed by
>> - the host CPU
>> -
>> -= EXAMPLE
>> -
>> - pmicintc: pmic@0 {
>> - compatible = "qcom,pm8921";
>> - interrupts = <104 8>;
>> - #interrupt-cells = <2>;
>> - interrupt-controller;
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - rtc@11d {
>> - compatible = "qcom,pm8921-rtc";
>> - reg = <0x11d>;
>> - interrupts = <0x27 0>;
>> - };
>> - };
>> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>> b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>> new file mode 100644
>> index 0000000..b4892f1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>> @@ -0,0 +1,108 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm PM8xxx PMIC multi-function devices
>> +
>> +maintainers:
>> + - Lee Jones <[email protected]>
>
> While Lee is maintainer of the mfd core, it would be better if this was
> someone looking out for the Qualcomm PMIC binding specifically.
>
>> +
>> +description: |
>> + The PM8xxx family of Power Management ICs are used to provide
>> regulated
>> + voltages and other various functionality to Qualcomm SoCs.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - qcom,pm8058
>> + - qcom,pm8821
>> + - qcom,pm8921
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + interrupts:
>> + description: |
>> + Specifies the interrupt that indicates a subdevice has
>> generated an
>> + interrupt (summary interrupt).
>> +
>> + '#interrupt-cells':
>> + description: |
>> + Specifies the number of cells needed to encode an interrupt
>> source.
>> + The 1st cell contains the interrupt number. The 2nd cell is the
>> + trigger type.
>> + const: 2
>> +
>> + interrupt-controller: true
>> +
>> +patternProperties:
>> + "rtc@[0-9a-f]+$":
>
> Can we somehow link this to individual binding docs instead of listing
> all the possible functions here?
>
you mean we should split this into two:
qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml
Please correct me if wrong.
> Regards,
> Bjorn
>
>> + type: object
>> + properties:
>> + compatible:
>> + enum:
>> + - qcom,pm8058-rtc
>> + - qcom,pm8921-rtc
>> + - qcom,pm8941-rtc
>> + - qcom,pm8018-rtc
>> +
>> + reg:
>> + description: Specifies the base address of the RTC registers
>> +
>> + interrupts:
>> + description: Specifies the RTC's alarm interrupts
>> +
>> + allow-set-time:
>> + $ref: /schemas/types.yaml#/definitions/flag
>> + description:
>> + Indicates that the setting of RTC time is allowed by the
>> host CPU.
>> +
>> + required:
>> + - compatible
>> + - reg
>> + - interrupts
>> +
>> + additionalProperties: false
>> +
>> +required:
>> + - compatible
>> + - '#address-cells'
>> + - '#size-cells'
>> + - interrupts
>> + - '#interrupt-cells'
>> + - interrupt-controller
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/spmi/spmi.h>
>> + spmi_bus: spmi@c440000 {
>> + reg = <0x0c440000 0x1100>;
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> + pmicintc: pmic@0 {
>> + reg = <0x0 SPMI_USID>;
>> + compatible = "qcom,pm8921";
>> + interrupts = <104 8>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pm8921_rtc: rtc@11d {
>> + compatible = "qcom,pm8921-rtc";
>> + reg = <0x11d>;
>> + interrupts = <0x27 0>;
>> + };
>> + };
>> + };
>> +...
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
>> member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>
On Wed 07 Apr 10:37 CDT 2021, [email protected] wrote:
> Hi Bjorn,
>
> On 2021-03-11 22:33, Bjorn Andersson wrote:
> > On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
[..]
> > > +patternProperties:
> > > + "rtc@[0-9a-f]+$":
> >
> > Can we somehow link this to individual binding docs instead of listing
> > all the possible functions here?
> >
>
> you mean we should split this into two:
> qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml
> Please correct me if wrong.
>
Right, I'm worried that it will be quite hard to maintain this document
once we start adding all the various pmic blocks to it. So if we somehow
can maintain a series of qcom-pm8xxx-<func>.yaml and just ref them into
the main PMIC definition.
@Rob, can you give us some guidance on how to structure this binding,
with the various PMICs described will have some defined subset of a
larger set of hardware blocks that's often shared between versions?
Regards,
Bjorn
On Wed, Apr 7, 2021 at 9:37 PM Bjorn Andersson
<[email protected]> wrote:
>
> On Wed 07 Apr 10:37 CDT 2021, [email protected] wrote:
>
> > Hi Bjorn,
> >
> > On 2021-03-11 22:33, Bjorn Andersson wrote:
> > > On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
> [..]
> > > > +patternProperties:
> > > > + "rtc@[0-9a-f]+$":
> > >
> > > Can we somehow link this to individual binding docs instead of listing
> > > all the possible functions here?
> > >
> >
> > you mean we should split this into two:
> > qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml
> > Please correct me if wrong.
> >
>
> Right, I'm worried that it will be quite hard to maintain this document
> once we start adding all the various pmic blocks to it. So if we somehow
> can maintain a series of qcom-pm8xxx-<func>.yaml and just ref them into
> the main PMIC definition.
>
> @Rob, can you give us some guidance on how to structure this binding,
> with the various PMICs described will have some defined subset of a
> larger set of hardware blocks that's often shared between versions?
How you suggest is good. The only other thing is just 1 complete
example rather than a bunch of <func> fragments.
Rob