Add per-platform max clock rate check in mtk_dpi_bridge_mode_valid.
Reviewed-by: Chun-Kuang Hu <[email protected]>
Signed-off-by: Pi-Hsun Shih <[email protected]>
Signed-off-by: Rex-BC Chen <[email protected]>
Signed-off-by: Jitao Shi <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index b05f900d9322..e1945d4bd7c4 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
struct mtk_dpi_conf {
unsigned int (*cal_factor)(int clock);
u32 reg_h_fre_con;
+ u32 max_clock_khz;
bool edge_sel_en;
};
@@ -557,9 +558,22 @@ static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
mtk_dpi_set_display_mode(dpi, &dpi->mode);
}
+static enum drm_mode_status
+mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode)
+{
+ struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+
+ if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
.attach = mtk_dpi_bridge_attach,
.mode_set = mtk_dpi_bridge_mode_set,
+ .mode_valid = mtk_dpi_bridge_mode_valid,
.disable = mtk_dpi_bridge_disable,
.enable = mtk_dpi_bridge_enable,
};
@@ -668,17 +682,20 @@ static unsigned int mt8183_calculate_factor(int clock)
static const struct mtk_dpi_conf mt8173_conf = {
.cal_factor = mt8173_calculate_factor,
.reg_h_fre_con = 0xe0,
+ .max_clock_khz = 300000,
};
static const struct mtk_dpi_conf mt2701_conf = {
.cal_factor = mt2701_calculate_factor,
.reg_h_fre_con = 0xb0,
.edge_sel_en = true,
+ .max_clock_khz = 150000,
};
static const struct mtk_dpi_conf mt8183_conf = {
.cal_factor = mt8183_calculate_factor,
.reg_h_fre_con = 0xe0,
+ .max_clock_khz = 100000,
};
static int mtk_dpi_probe(struct platform_device *pdev)
--
2.18.0