This patch converts text based dt-binding document to YAML based
dt-binding document.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
.../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 138 +++++++++++++++++++++
.../bindings/ata/nvidia,tegra124-ahci.txt | 44 -------
2 files changed, 138 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
delete mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
new file mode 100644
index 0000000..3c15aea
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/nvidia,tegra-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra AHCI SATA Controller
+
+maintainers:
+ - Thierry Reding <[email protected]>
+ - Jonathan Hunter <[email protected]>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra124-ahci
+ - nvidia,tegra132-ahci
+ - nvidia,tegra210-ahci
+
+ reg:
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: AHCI registers
+ - description: SATA configuration and IPFS registers
+ - description: SATA AUX registers
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sata
+ - const: sata-oob
+
+ clocks:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: sata
+ - const: sata-cold
+ - const: sata-oob
+
+ resets:
+ maxItems: 3
+
+ phy-names:
+ items:
+ - const: sata-0
+
+ phys:
+ maxItems: 1
+
+ hvdd-supply:
+ description: SATA HVDD regulator supply.
+
+ vddio-supply:
+ description: SATA VDDIO regulator supply.
+
+ avdd-supply:
+ description: SATA AVDD regulator supply.
+
+ target-5v-supply:
+ description: SATA 5V power regulator supply.
+
+ target-12v-supply:
+ description: SATA 12V power regulator supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - reset-names
+ - resets
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra124-ahci
+ - nvidia,tegra132-ahci
+ then:
+ properties:
+ reg:
+ maxItems: 2
+ reset-names:
+ minItems: 3
+ resets:
+ minItems: 3
+ required:
+ - phys
+ - phy-names
+ - hvdd-supply
+ - vddio-supply
+ - avdd-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra210-ahci
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reset-names:
+ minItems: 3
+ resets:
+ minItems: 3
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/reset/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sata@70020000 {
+ compatible = "nvidia,tegra210-ahci";
+ reg = <0x70027000 0x00002000>, /* AHCI */
+ <0x70020000 0x00007000>, /* SATA */
+ <0x70001100 0x00010000>; /* SATA AUX */
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SATA>,
+ <&tegra_car TEGRA210_CLK_SATA_OOB>;
+ clock-names = "sata", "sata-oob";
+ resets = <&tegra_car 124>,
+ <&tegra_car 129>,
+ <&tegra_car 123>;
+ reset-names = "sata", "sata-cold", "sata-oob";
+ };
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
deleted file mode 100644
index 12ab2f7..0000000
--- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Tegra SoC SATA AHCI controller
-
-Required properties :
-- compatible : Must be one of:
- - Tegra124 : "nvidia,tegra124-ahci"
- - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
- - Tegra210 : "nvidia,tegra210-ahci"
-- reg : Should contain 2 entries:
- - AHCI register set (SATA BAR5)
- - SATA register set
-- interrupts : Defines the interrupt used by SATA
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- - sata
- - sata-oob
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - sata
- - sata-oob
- - sata-cold
-- phys : Must contain an entry for each entry in phy-names.
- See ../phy/phy-bindings.txt for details.
-- phy-names : Must include the following entries:
- - For Tegra124 and Tegra132:
- - sata-phy : XUSB PADCTL SATA PHY
-- For Tegra124 and Tegra132:
- - hvdd-supply : Defines the SATA HVDD regulator
- - vddio-supply : Defines the SATA VDDIO regulator
- - avdd-supply : Defines the SATA AVDD regulator
- - target-5v-supply : Defines the SATA 5V power regulator
- - target-12v-supply : Defines the SATA 12V power regulator
-
-Optional properties:
-- reg :
- - AUX register set
-- clock-names :
- - cml1 :
- cml1 clock should be defined here if the PHY driver
- doesn't manage them. If it does, they should not be.
-- phy-names :
- - For T210:
- - sata-phy
--
2.7.4
On Tue, Apr 06, 2021 at 06:25:29PM -0700, Sowjanya Komatineni wrote:
> This patch converts text based dt-binding document to YAML based
> dt-binding document.
>
> Reviewed-by: Rob Herring <[email protected]>
> Signed-off-by: Sowjanya Komatineni <[email protected]>
> ---
> .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 138 +++++++++++++++++++++
> .../bindings/ata/nvidia,tegra124-ahci.txt | 44 -------
> 2 files changed, 138 insertions(+), 44 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
> delete mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
Acked-by: Thierry Reding <[email protected]>