2021-05-10 11:52:20

by Md Sadre Alam

[permalink] [raw]
Subject: [PATCH V2] mtd: rawnand: qcom: avoid writing to obsolete register

QPIC_EBI2_ECC_BUF_CFG register got obsolete from QPIC V2.0 onwards.
Avoid writing this register if QPIC version is V2.0 or newer.

Signed-off-by: Md Sadre Alam <[email protected]>
---
[V2]
* Updated commit message
drivers/mtd/nand/raw/qcom_nandc.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index a64fb6c..32f4641 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -762,7 +762,8 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i
nandc_set_reg(chip, NAND_DEV0_CFG0, cfg0);
nandc_set_reg(chip, NAND_DEV0_CFG1, cfg1);
nandc_set_reg(chip, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
- nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
+ if (!nandc->props->qpic_v2)
+ nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
@@ -1133,7 +1134,8 @@ static void config_nand_page_read(struct nand_chip *chip)

write_reg_dma(nandc, NAND_ADDR0, 2, 0);
write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
+ if (!nandc->props->qpic_v2)
+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
@@ -1191,8 +1193,9 @@ static void config_nand_page_write(struct nand_chip *chip)

write_reg_dma(nandc, NAND_ADDR0, 2, 0);
write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
- NAND_BAM_NEXT_SGL);
+ if (!nandc->props->qpic_v2)
+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
+ NAND_BAM_NEXT_SGL);
}

/*
@@ -1248,7 +1251,8 @@ static int nandc_param(struct qcom_nand_host *host)
| 2 << WR_RD_BSY_GAP
| 0 << WIDE_FLASH
| 1 << DEV0_CFG1_ECC_DISABLE);
- nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
+ if (!nandc->props->qpic_v2)
+ nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);

/* configure CMD1 and VLD for ONFI param probing in QPIC v1 */
if (!nandc->props->qpic_v2) {
@@ -2689,7 +2693,8 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
| ecc_mode << ECC_MODE
| host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH;

- host->ecc_buf_cfg = 0x203 << NUM_STEPS;
+ if (!nandc->props->qpic_v2)
+ host->ecc_buf_cfg = 0x203 << NUM_STEPS;

host->clrflashstatus = FS_READY_BSY_N;
host->clrreadstatus = 0xc0;
--
2.7.4


2021-05-10 12:06:31

by Miquel Raynal

[permalink] [raw]
Subject: Re: [PATCH V2] mtd: rawnand: qcom: avoid writing to obsolete register


Md Sadre Alam <[email protected]> wrote on Mon, 10 May 2021
16:26:46 +0530:

> QPIC_EBI2_ECC_BUF_CFG register got obsolete from QPIC V2.0 onwards.
> Avoid writing this register if QPIC version is V2.0 or newer.
>
> Signed-off-by: Md Sadre Alam <[email protected]>
> ---
> [V2]
> * Updated commit message

I already applied the patch with the fixed title, but thanks.

Cheers,
Miquèl