Converted Qualcomm Bluetooth binidings to DT schema.
Signed-off-by: Venkata Lakshmi Narayana Gubba <[email protected]>
---
.../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 -------------
.../bindings/net/qualcomm-bluetooth.yaml | 112 +++++++++++++++++++++
2 files changed, 112 insertions(+), 69 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
deleted file mode 100644
index 709ca6d..0000000
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Qualcomm Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Qualcomm devices.
-
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
- - compatible: should contain one of the following:
- * "qcom,qca6174-bt"
- * "qcom,qca9377-bt"
- * "qcom,wcn3990-bt"
- * "qcom,wcn3991-bt"
- * "qcom,wcn3998-bt"
- * "qcom,qca6390-bt"
-
-Optional properties for compatible string qcom,qca6174-bt:
-
- - enable-gpios: gpio specifier used to enable chip
- - clocks: clock provided to the controller (SUSCLK_32KHZ)
- - firmware-name: specify the name of nvm firmware to load
-
-Optional properties for compatible string qcom,qca9377-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
-
-Required properties for compatible string qcom,wcn399x-bt:
-
- - vddio-supply: VDD_IO supply regulator handle.
- - vddxo-supply: VDD_XO supply regulator handle.
- - vddrf-supply: VDD_RF supply regulator handle.
- - vddch0-supply: VDD_CH0 supply regulator handle.
-
-Optional properties for compatible string qcom,wcn399x-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
- - firmware-name: specify the name of nvm firmware to load
- - clocks: clock provided to the controller
-
-Examples:
-
-serial@7570000 {
- label = "BT-UART";
- status = "okay";
-
- bluetooth {
- compatible = "qcom,qca6174-bt";
-
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
- clocks = <&divclk4>;
- firmware-name = "nvm_00440302.bin";
- };
-};
-
-serial@898000 {
- bluetooth {
- compatible = "qcom,wcn3990-bt";
-
- vddio-supply = <&vreg_s4a_1p8>;
- vddxo-supply = <&vreg_l7a_1p8>;
- vddrf-supply = <&vreg_l17a_1p3>;
- vddch0-supply = <&vreg_l25a_3p3>;
- max-speed = <3200000>;
- firmware-name = "crnv21.bin";
- clocks = <&rpmhcc RPMH_RF_CLK2>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 0000000..772689b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+ - Balakrishna Godavarthi <[email protected]>
+ - Rocky Liao <[email protected]>
+
+description:
+ This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qca6174-bt
+ - qcom,qca9377-bt
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ - qcom,qca6390-bt
+
+ enable-gpios:
+ maxItems: 1
+ description: gpio specifier used to enable chip
+
+ clocks:
+ maxItems: 1
+ description: clock provided to the controller (SUSCLK_32KHZ)
+
+ vddio-supply:
+ description: VDD_IO supply regulator handle
+
+ vddxo-supply:
+ description: VDD_XO supply regulator handle
+
+ vddrf-supply:
+ description: VDD_RF supply regulator handle
+
+ vddch0-supply:
+ description: VDD_CH0 supply regulator handle
+
+ max-speed:
+ description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+ firmware-name:
+ description: specify the name of nvm firmware to load
+
+ local-bd-address:
+ description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+ - compatible
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qca6174-bt
+ then:
+ required:
+ - enable-gpios
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ then:
+ required:
+ - vddio-supply
+ - vddxo-supply
+ - vddrf-supply
+ - vddch0-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ firmware-name = "nvm_00440302.bin";
+ };
+ };
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ firmware-name = "crnv21.bin";
+ };
+ };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
On Tue, 18 May 2021 22:04:45 +0530, Venkata Lakshmi Narayana Gubba wrote:
> Converted Qualcomm Bluetooth binidings to DT schema.
>
> Signed-off-by: Venkata Lakshmi Narayana Gubba <[email protected]>
> ---
> .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 -------------
> .../bindings/net/qualcomm-bluetooth.yaml | 112 +++++++++++++++++++++
> 2 files changed, 112 insertions(+), 69 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>
Reviewed-by: Rob Herring <[email protected]>