Add Epoch Subsystem (EPSS) L3 provider support on SM7280 SoCs.
v2:
- Addressed review comments (Georgi/Sibi)
Depends on: https://lore.kernel.org/patchwork/cover/1418814/
Odelu Kukatla (3):
dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
interconnect: qcom: Add EPSS L3 support on SC7280
arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
.../bindings/interconnect/qcom,osm-l3.yaml | 3 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 ++
drivers/interconnect/qcom/osm-l3.c | 135 ++++++++++++++++-----
drivers/interconnect/qcom/sc7280.h | 10 ++
include/dt-bindings/interconnect/qcom,osm-l3.h | 10 +-
5 files changed, 136 insertions(+), 31 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Add Epoch Subsystem (EPSS) L3 interconnect provider binding on SC7280
SoCs.
Signed-off-by: Odelu Kukatla <[email protected]>
---
.../devicetree/bindings/interconnect/qcom,osm-l3.yaml | 3 ++-
include/dt-bindings/interconnect/qcom,osm-l3.h | 10 +++++++++-
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index d6a95c3..aa76949 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -18,12 +18,13 @@ properties:
compatible:
enum:
- qcom,sc7180-osm-l3
+ - qcom,sc7280-epss-l3
- qcom,sdm845-osm-l3
- qcom,sm8150-osm-l3
- qcom,sm8250-epss-l3
reg:
- maxItems: 1
+ maxItems: 4
clocks:
items:
diff --git a/include/dt-bindings/interconnect/qcom,osm-l3.h b/include/dt-bindings/interconnect/qcom,osm-l3.h
index 61ef649..99534a5 100644
--- a/include/dt-bindings/interconnect/qcom,osm-l3.h
+++ b/include/dt-bindings/interconnect/qcom,osm-l3.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (C) 2019 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2019, 2021 The Linux Foundation. All rights reserved.
*/
#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H
@@ -11,5 +11,13 @@
#define MASTER_EPSS_L3_APPS 0
#define SLAVE_EPSS_L3_SHARED 1
+#define SLAVE_EPSS_L3_CPU0 2
+#define SLAVE_EPSS_L3_CPU1 3
+#define SLAVE_EPSS_L3_CPU2 4
+#define SLAVE_EPSS_L3_CPU3 5
+#define SLAVE_EPSS_L3_CPU4 6
+#define SLAVE_EPSS_L3_CPU5 7
+#define SLAVE_EPSS_L3_CPU6 8
+#define SLAVE_EPSS_L3_CPU7 9
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Add Epoch Subsystem (EPSS) L3 interconnect provider support on
SC7280 SoCs.
Signed-off-by: Odelu Kukatla <[email protected]>
---
drivers/interconnect/qcom/osm-l3.c | 135 +++++++++++++++++++++++++++++--------
drivers/interconnect/qcom/sc7280.h | 10 +++
2 files changed, 116 insertions(+), 29 deletions(-)
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 695f287..a8c0ee8 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -15,6 +15,7 @@
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include "sc7180.h"
+#include "sc7280.h"
#include "sdm845.h"
#include "sm8150.h"
#include "sm8250.h"
@@ -32,17 +33,33 @@
/* EPSS Register offsets */
#define EPSS_LUT_ROW_SIZE 4
+#define EPSS_REG_L3_VOTE 0x90
#define EPSS_REG_FREQ_LUT 0x100
#define EPSS_REG_PERF_STATE 0x320
+#define EPSS_CORE_OFFSET 0x4
+#define EPSS_L3_VOTE_REG(base, cpu)\
+ (((base) + EPSS_REG_L3_VOTE) +\
+ ((cpu) * EPSS_CORE_OFFSET))
-#define OSM_L3_MAX_LINKS 1
+#define L3_DOMAIN_CNT 4
+#define L3_MAX_LINKS 9
#define to_qcom_provider(_provider) \
container_of(_provider, struct qcom_osm_l3_icc_provider, provider)
+/**
+ * @domain_base: an array of base address for each clock domain
+ * @max_state: max supported frequency level
+ * @per_core_dcvs: flag used to indicate whether the frequency scaling
+ * for each core is enabled
+ * @reg_perf_state: requested frequency level
+ * @lut_tables: an array of supported frequency levels
+ * @provider: interconnect provider of this node
+ */
struct qcom_osm_l3_icc_provider {
- void __iomem *base;
+ void __iomem *domain_base[L3_DOMAIN_CNT];
unsigned int max_state;
+ bool per_core_dcvs;
unsigned int reg_perf_state;
unsigned long lut_tables[LUT_MAX_ENTRIES];
struct icc_provider provider;
@@ -55,34 +72,41 @@ struct qcom_osm_l3_icc_provider {
* @id: a unique node identifier
* @num_links: the total number of @links
* @buswidth: width of the interconnect between a node and the bus
+ * @domain: clock domain of the cpu node
+ * @cpu: cpu instance within its clock domain
*/
struct qcom_icc_node {
const char *name;
- u16 links[OSM_L3_MAX_LINKS];
+ u16 links[L3_MAX_LINKS];
u16 id;
u16 num_links;
u16 buswidth;
+ u16 domain;
+ int cpu;
};
struct qcom_icc_desc {
const struct qcom_icc_node **nodes;
size_t num_nodes;
+ bool per_core_dcvs;
unsigned int lut_row_size;
unsigned int reg_freq_lut;
unsigned int reg_perf_state;
};
-#define DEFINE_QNODE(_name, _id, _buswidth, ...) \
- static const struct qcom_icc_node _name = { \
- .name = #_name, \
- .id = _id, \
- .buswidth = _buswidth, \
- .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \
- .links = { __VA_ARGS__ }, \
+#define DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, ...) \
+ static const struct qcom_icc_node _name = { \
+ .name = #_name, \
+ .id = _id, \
+ .buswidth = _buswidth, \
+ .domain = _domain, \
+ .cpu = _cpu, \
+ .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \
+ .links = { __VA_ARGS__ }, \
}
-DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3);
-DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16);
+DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, 0, 0, SDM845_SLAVE_OSM_L3);
+DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16, 0, 0);
static const struct qcom_icc_node *sdm845_osm_l3_nodes[] = {
[MASTER_OSM_L3_APPS] = &sdm845_osm_apps_l3,
@@ -97,8 +121,8 @@ static const struct qcom_icc_desc sdm845_icc_osm_l3 = {
.reg_perf_state = OSM_REG_PERF_STATE,
};
-DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, SC7180_SLAVE_OSM_L3);
-DEFINE_QNODE(sc7180_osm_l3, SC7180_SLAVE_OSM_L3, 16);
+DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, 0, 0, SC7180_SLAVE_OSM_L3);
+DEFINE_QNODE(sc7180_osm_l3, SC7180_SLAVE_OSM_L3, 16, 0, 0);
static const struct qcom_icc_node *sc7180_osm_l3_nodes[] = {
[MASTER_OSM_L3_APPS] = &sc7180_osm_apps_l3,
@@ -113,8 +137,8 @@ static const struct qcom_icc_desc sc7180_icc_osm_l3 = {
.reg_perf_state = OSM_REG_PERF_STATE,
};
-DEFINE_QNODE(sm8150_osm_apps_l3, SM8150_MASTER_OSM_L3_APPS, 32, SM8150_SLAVE_OSM_L3);
-DEFINE_QNODE(sm8150_osm_l3, SM8150_SLAVE_OSM_L3, 32);
+DEFINE_QNODE(sm8150_osm_apps_l3, SM8150_MASTER_OSM_L3_APPS, 32, 0, 0, SM8150_SLAVE_OSM_L3);
+DEFINE_QNODE(sm8150_osm_l3, SM8150_SLAVE_OSM_L3, 32, 0, 0);
static const struct qcom_icc_node *sm8150_osm_l3_nodes[] = {
[MASTER_OSM_L3_APPS] = &sm8150_osm_apps_l3,
@@ -129,8 +153,8 @@ static const struct qcom_icc_desc sm8150_icc_osm_l3 = {
.reg_perf_state = OSM_REG_PERF_STATE,
};
-DEFINE_QNODE(sm8250_epss_apps_l3, SM8250_MASTER_EPSS_L3_APPS, 32, SM8250_SLAVE_EPSS_L3);
-DEFINE_QNODE(sm8250_epss_l3, SM8250_SLAVE_EPSS_L3, 32);
+DEFINE_QNODE(sm8250_epss_apps_l3, SM8250_MASTER_EPSS_L3_APPS, 32, 0, 0, SM8250_SLAVE_EPSS_L3);
+DEFINE_QNODE(sm8250_epss_l3, SM8250_SLAVE_EPSS_L3, 32, 0, 0);
static const struct qcom_icc_node *sm8250_epss_l3_nodes[] = {
[MASTER_EPSS_L3_APPS] = &sm8250_epss_apps_l3,
@@ -145,6 +169,39 @@ static const struct qcom_icc_desc sm8250_icc_epss_l3 = {
.reg_perf_state = EPSS_REG_PERF_STATE,
};
+DEFINE_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, 32, 0, 0, SC7280_SLAVE_EPSS_L3_SHARED, SC7280_SLAVE_EPSS_L3_CPU0, SC7280_SLAVE_EPSS_L3_CPU1, SC7280_SLAVE_EPSS_L3_CPU2, SC7280_SLAVE_EPSS_L3_CPU3, SC7280_SLAVE_EPSS_L3_CPU4, SC7280_SLAVE_EPSS_L3_CPU5, SC7280_SLAVE_EPSS_L3_CPU6, SC7280_SLAVE_EPSS_L3_CPU7);
+DEFINE_QNODE(sc7280_epss_l3_shared, SC7280_SLAVE_EPSS_L3_SHARED, 32, 0, 0);
+DEFINE_QNODE(sc7280_epss_l3_cpu0, SC7280_SLAVE_EPSS_L3_CPU0, 32, 1, 0);
+DEFINE_QNODE(sc7280_epss_l3_cpu1, SC7280_SLAVE_EPSS_L3_CPU1, 32, 1, 1);
+DEFINE_QNODE(sc7280_epss_l3_cpu2, SC7280_SLAVE_EPSS_L3_CPU2, 32, 1, 2);
+DEFINE_QNODE(sc7280_epss_l3_cpu3, SC7280_SLAVE_EPSS_L3_CPU3, 32, 1, 3);
+DEFINE_QNODE(sc7280_epss_l3_cpu4, SC7280_SLAVE_EPSS_L3_CPU4, 32, 2, 0);
+DEFINE_QNODE(sc7280_epss_l3_cpu5, SC7280_SLAVE_EPSS_L3_CPU5, 32, 2, 1);
+DEFINE_QNODE(sc7280_epss_l3_cpu6, SC7280_SLAVE_EPSS_L3_CPU6, 32, 2, 2);
+DEFINE_QNODE(sc7280_epss_l3_cpu7, SC7280_SLAVE_EPSS_L3_CPU7, 32, 3, 0);
+
+static const struct qcom_icc_node *sc7280_epss_l3_nodes[] = {
+ [MASTER_EPSS_L3_APPS] = &sc7280_epss_apps_l3,
+ [SLAVE_EPSS_L3_SHARED] = &sc7280_epss_l3_shared,
+ [SLAVE_EPSS_L3_CPU0] = &sc7280_epss_l3_cpu0,
+ [SLAVE_EPSS_L3_CPU1] = &sc7280_epss_l3_cpu1,
+ [SLAVE_EPSS_L3_CPU2] = &sc7280_epss_l3_cpu2,
+ [SLAVE_EPSS_L3_CPU3] = &sc7280_epss_l3_cpu3,
+ [SLAVE_EPSS_L3_CPU4] = &sc7280_epss_l3_cpu4,
+ [SLAVE_EPSS_L3_CPU5] = &sc7280_epss_l3_cpu5,
+ [SLAVE_EPSS_L3_CPU6] = &sc7280_epss_l3_cpu6,
+ [SLAVE_EPSS_L3_CPU7] = &sc7280_epss_l3_cpu7,
+};
+
+static const struct qcom_icc_desc sc7280_icc_epss_l3 = {
+ .nodes = sc7280_epss_l3_nodes,
+ .num_nodes = ARRAY_SIZE(sc7280_epss_l3_nodes),
+ .per_core_dcvs = true,
+ .lut_row_size = EPSS_LUT_ROW_SIZE,
+ .reg_freq_lut = EPSS_REG_FREQ_LUT,
+ .reg_perf_state = EPSS_REG_PERF_STATE,
+};
+
static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
{
struct qcom_osm_l3_icc_provider *qp;
@@ -156,13 +213,18 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
u32 agg_avg = 0;
u64 rate;
- qn = src->data;
+ qn = dst->data;
provider = src->provider;
qp = to_qcom_provider(provider);
- list_for_each_entry(n, &provider->nodes, node_list)
- provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
- &agg_avg, &agg_peak);
+ /* Skip aggregation when per core l3 scaling is enabled */
+ if (qp->per_core_dcvs) {
+ agg_peak = dst->peak_bw;
+ } else {
+ list_for_each_entry(n, &provider->nodes, node_list)
+ provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
+ &agg_avg, &agg_peak);
+ }
rate = max(agg_avg, agg_peak);
rate = icc_units_to_bps(rate);
@@ -173,7 +235,10 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
break;
}
- writel_relaxed(index, qp->base + qp->reg_perf_state);
+ if (qp->per_core_dcvs)
+ writel_relaxed(index, EPSS_L3_VOTE_REG(qp->domain_base[qn->domain], qn->cpu));
+ else
+ writel_relaxed(index, qp->domain_base[qn->domain] + qp->reg_perf_state);
return 0;
}
@@ -194,11 +259,12 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
const struct qcom_icc_desc *desc;
struct icc_onecell_data *data;
struct icc_provider *provider;
+ struct property *prop;
const struct qcom_icc_node **qnodes;
struct icc_node *node;
size_t num_nodes;
struct clk *clk;
- int ret;
+ int ret, index, domain_count;
clk = clk_get(&pdev->dev, "xo");
if (IS_ERR(clk))
@@ -218,12 +284,21 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
if (!qp)
return -ENOMEM;
- qp->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(qp->base))
- return PTR_ERR(qp->base);
+ prop = of_find_property(pdev->dev.of_node, "reg", NULL);
+ if (!prop)
+ return -EINVAL;
+ domain_count = prop->length / (4 * sizeof(prop->length));
+ if (!domain_count)
+ return -EINVAL;
+
+ for (index = 0; index < domain_count ; index++) {
+ qp->domain_base[index] = devm_platform_ioremap_resource(pdev, index);
+ if (IS_ERR(qp->domain_base[index]))
+ return PTR_ERR(qp->domain_base[index]);
+ }
/* HW should be in enabled state to proceed */
- if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) {
+ if (!(readl_relaxed(qp->domain_base[0] + REG_ENABLE) & 0x1)) {
dev_err(&pdev->dev, "error hardware not enabled\n");
return -ENODEV;
}
@@ -235,7 +310,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
qp->reg_perf_state = desc->reg_perf_state;
for (i = 0; i < LUT_MAX_ENTRIES; i++) {
- info = readl_relaxed(qp->base + desc->reg_freq_lut +
+ info = readl_relaxed(qp->domain_base[0] + desc->reg_freq_lut +
i * desc->lut_row_size);
src = FIELD_GET(LUT_SRC, info);
lval = FIELD_GET(LUT_L_VAL, info);
@@ -254,6 +329,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
prev_freq = freq;
}
qp->max_state = i;
+ qp->per_core_dcvs = desc->per_core_dcvs;
qnodes = desc->nodes;
num_nodes = desc->num_nodes;
@@ -309,6 +385,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
static const struct of_device_id osm_l3_of_match[] = {
{ .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 },
+ { .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 },
{ .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 },
{ .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 },
{ .compatible = "qcom,sm8250-epss-l3", .data = &sm8250_icc_epss_l3 },
diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h
index 175e400..5df7600 100644
--- a/drivers/interconnect/qcom/sc7280.h
+++ b/drivers/interconnect/qcom/sc7280.h
@@ -150,5 +150,15 @@
#define SC7280_SLAVE_PCIE_1 139
#define SC7280_SLAVE_QDSS_STM 140
#define SC7280_SLAVE_TCU 141
+#define SC7280_MASTER_EPSS_L3_APPS 142
+#define SC7280_SLAVE_EPSS_L3_SHARED 143
+#define SC7280_SLAVE_EPSS_L3_CPU0 144
+#define SC7280_SLAVE_EPSS_L3_CPU1 145
+#define SC7280_SLAVE_EPSS_L3_CPU2 146
+#define SC7280_SLAVE_EPSS_L3_CPU3 147
+#define SC7280_SLAVE_EPSS_L3_CPU4 148
+#define SC7280_SLAVE_EPSS_L3_CPU5 149
+#define SC7280_SLAVE_EPSS_L3_CPU6 150
+#define SC7280_SLAVE_EPSS_L3_CPU7 151
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On Tue, 18 May 2021 23:04:00 +0530, Odelu Kukatla wrote:
> Add Epoch Subsystem (EPSS) L3 interconnect provider binding on SC7280
> SoCs.
>
> Signed-off-by: Odelu Kukatla <[email protected]>
> ---
> .../devicetree/bindings/interconnect/qcom,osm-l3.yaml | 3 ++-
> include/dt-bindings/interconnect/qcom,osm-l3.h | 10 +++++++++-
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.example.dt.yaml: interconnect@17d41000: reg: [[399773696, 5120]] is too short
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
See https://patchwork.ozlabs.org/patch/1480367
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On 2021-05-19 08:18, Rob Herring wrote:
> On Tue, 18 May 2021 23:04:00 +0530, Odelu Kukatla wrote:
>> Add Epoch Subsystem (EPSS) L3 interconnect provider binding on SC7280
>> SoCs.
>>
>> Signed-off-by: Odelu Kukatla <[email protected]>
>> ---
>> .../devicetree/bindings/interconnect/qcom,osm-l3.yaml | 3
>> ++-
>> include/dt-bindings/interconnect/qcom,osm-l3.h | 10
>> +++++++++-
>> 2 files changed, 11 insertions(+), 2 deletions(-)
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.example.dt.yaml:
> interconnect@17d41000: reg: [[399773696, 5120]] is too short
> From schema:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
>
> See https://patchwork.ozlabs.org/patch/1480367
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
Thanks Rob!.
I will address this in next revision.