clang points out that ret in ks8851_read_selftest() is set but unused:
drivers/net/ethernet/micrel/ks8851_common.c:1028:6: warning: variable
'ret' set but not used [-Wunused-but-set-variable]
int ret = 0;
^
1 warning generated.
The return code of this function has never been checked so just remove
ret and make the function return void.
Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver")
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
---
drivers/net/ethernet/micrel/ks8851_common.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
index 13eef6e9bd2d..831518466de2 100644
--- a/drivers/net/ethernet/micrel/ks8851_common.c
+++ b/drivers/net/ethernet/micrel/ks8851_common.c
@@ -1022,30 +1022,23 @@ static int ks8851_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
*
* Read and check the TX/RX memory selftest information.
*/
-static int ks8851_read_selftest(struct ks8851_net *ks)
+static void ks8851_read_selftest(struct ks8851_net *ks)
{
unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
- int ret = 0;
unsigned rd;
rd = ks8851_rdreg16(ks, KS_MBIR);
if ((rd & both_done) != both_done) {
netdev_warn(ks->netdev, "Memory selftest not finished\n");
- return 0;
+ return;
}
- if (rd & MBIR_TXMBFA) {
+ if (rd & MBIR_TXMBFA)
netdev_err(ks->netdev, "TX memory selftest fail\n");
- ret |= 1;
- }
- if (rd & MBIR_RXMBFA) {
+ if (rd & MBIR_RXMBFA)
netdev_err(ks->netdev, "RX memory selftest fail\n");
- ret |= 2;
- }
-
- return 0;
}
/* driver bus management functions */
base-commit: 270d47dc1fc4756a0158778084a236bc83c156d2
--
2.32.0.rc0
On Thu, Jun 03, 2021 at 09:56:13AM -0700, Nathan Chancellor wrote:
> clang points out that ret in ks8851_read_selftest() is set but unused:
>
> drivers/net/ethernet/micrel/ks8851_common.c:1028:6: warning: variable
> 'ret' set but not used [-Wunused-but-set-variable]
> int ret = 0;
> ^
> 1 warning generated.
>
> The return code of this function has never been checked so just remove
> ret and make the function return void.
>
> Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver")
> Suggested-by: Andrew Lunn <[email protected]>
> Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
Hello:
This patch was applied to netdev/net-next.git (refs/heads/master):
On Thu, 3 Jun 2021 09:56:13 -0700 you wrote:
> clang points out that ret in ks8851_read_selftest() is set but unused:
>
> drivers/net/ethernet/micrel/ks8851_common.c:1028:6: warning: variable
> 'ret' set but not used [-Wunused-but-set-variable]
> int ret = 0;
> ^
> 1 warning generated.
>
> [...]
Here is the summary with links:
- [net-next] net: ks8851: Make ks8851_read_selftest() return void
https://git.kernel.org/netdev/net-next/c/819fb78f6955
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html