From: Peng Li <[email protected]>
Add spaces required before the open parenthesis '('.
Add spaces required after that close brace '}'.
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
---
drivers/net/wan/pc300too.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index ecce999..885dcc5 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -68,7 +68,7 @@ typedef struct {
u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
-}plx9050;
+} plx9050;
typedef struct port_s {
struct napi_struct napi;
@@ -85,7 +85,7 @@ typedef struct port_s {
u16 txlast;
u8 rxs, txs, tmc; /* SCA registers */
u8 chan; /* physical port # - 0 or 1 */
-}port_t;
+} port_t;
typedef struct card_s {
int type; /* RSV, X21, etc. */
@@ -100,7 +100,7 @@ typedef struct card_s {
u8 irq; /* interrupt request level */
port_t ports[2];
-}card_t;
+} card_t;
#define get_port(card, port) ((port) < (card)->n_ports ? \
(&(card)->ports[port]) : (NULL))
@@ -117,7 +117,7 @@ static void pc300_set_iface(port_t *port)
sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
port->card);
- switch(port->settings.clock_type) {
+ switch (port->settings.clock_type) {
case CLOCK_INT:
rxs |= CLK_BRG; /* BRG output */
txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
--
2.8.1