If the MLE kernel is being powered off, rebooted or halted,
then SEXIT must be called. Note that the SEXIT GETSEC leaf
can only be called after a machine_shutdown() has been done on
these paths. The machine_shutdown() is not called on a few paths
like when poweroff action does not have a poweroff callback (into
ACPI code) or when an emergency reset is done. In these cases,
just the TXT registers are finalized but SEXIT is skipped.
Signed-off-by: Ross Philipson <[email protected]>
---
arch/x86/kernel/reboot.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index b29657b..796cbfb 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -12,6 +12,7 @@
#include <linux/delay.h>
#include <linux/objtool.h>
#include <linux/pgtable.h>
+#include <linux/slaunch.h>
#include <acpi/reboot.h>
#include <asm/io.h>
#include <asm/apic.h>
@@ -731,6 +732,7 @@ static void native_machine_restart(char *__unused)
if (!reboot_force)
machine_shutdown();
+ slaunch_finalize(!reboot_force);
__machine_emergency_restart(0);
}
@@ -741,6 +743,9 @@ static void native_machine_halt(void)
tboot_shutdown(TB_SHUTDOWN_HALT);
+ /* SEXIT done after machine_shutdown() to meet TXT requirements */
+ slaunch_finalize(1);
+
stop_this_cpu(NULL);
}
@@ -749,8 +754,12 @@ static void native_machine_power_off(void)
if (pm_power_off) {
if (!reboot_force)
machine_shutdown();
+ slaunch_finalize(!reboot_force);
pm_power_off();
+ } else {
+ slaunch_finalize(0);
}
+
/* A fallback in case there is no PM info available */
tboot_shutdown(TB_SHUTDOWN_HALT);
}
@@ -778,6 +787,7 @@ void machine_shutdown(void)
void machine_emergency_restart(void)
{
+ slaunch_finalize(0);
__machine_emergency_restart(1);
}
--
1.8.3.1