Convert the UniPhier peripheral glue reset binding to DT schema format.
Signed-off-by: Kunihiko Hayashi <[email protected]>
---
.../reset/socionext,uniphier-glue-reset.yaml | 88 ++++++++++++++++++++++
.../devicetree/bindings/reset/uniphier-reset.txt | 61 ---------------
2 files changed, 88 insertions(+), 61 deletions(-)
create mode 100644 Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
delete mode 100644 Documentation/devicetree/bindings/reset/uniphier-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
new file mode 100644
index 0000000..29e4a90
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral core reset in glue layer
+
+description: |
+ Some peripheral core reset belongs to its own glue layer. Before using
+ this core reset, it is necessary to control the clocks and resets to
+ enable this layer. These clocks and resets should be described in each
+ property.
+
+maintainers:
+ - Kunihiko Hayashi <[email protected]>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro4-usb3-reset
+ - socionext,uniphier-pro5-usb3-reset
+ - socionext,uniphier-pxs2-usb3-reset
+ - socionext,uniphier-ld20-usb3-reset
+ - socionext,uniphier-pxs3-usb3-reset
+ - socionext,uniphier-pro4-ahci-reset
+ - socionext,uniphier-pxs2-ahci-reset
+ - socionext,uniphier-pxs3-ahci-reset
+
+ reg:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items: # for others
+ - const: link
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items: # for others
+ - const: link
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#reset-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ usb-glue@65b00000 {
+ compatible = "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
deleted file mode 100644
index 88e06e5..0000000
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-UniPhier glue reset controller
-
-
-Peripheral core reset in glue layer
------------------------------------
-
-Some peripheral core reset belongs to its own glue layer. Before using
-this core reset, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
- "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
- "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3
- "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
- "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
- "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
- "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
- "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
- "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
-- #reset-cells: Should be 1.
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for the glue layer.
- According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
- "gio", "link" - for Pro4 and Pro5 SoCs
- "link" - for others
-- resets: A list of phandles to the reset control for the glue layer.
- According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
- "gio", "link" - for Pro4 and Pro5 SoCs
- "link" - for others
-
-Example:
-
- usb-glue@65b00000 {
- compatible = "socionext,uniphier-ld20-dwc3-glue",
- "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x65b00000 0x400>;
-
- usb_rst: reset@0 {
- compatible = "socionext,uniphier-ld20-usb3-reset";
- reg = <0x0 0x4>;
- #reset-cells = <1>;
- clock-names = "link";
- clocks = <&sys_clk 14>;
- reset-names = "link";
- resets = <&sys_rst 14>;
- };
-
- regulator {
- ...
- };
-
- phy {
- ...
- };
- ...
- };
--
2.7.4
On Wed, 23 Jun 2021 10:53:28 +0900, Kunihiko Hayashi wrote:
> Convert the UniPhier peripheral glue reset binding to DT schema format.
>
> Signed-off-by: Kunihiko Hayashi <[email protected]>
> ---
> .../reset/socionext,uniphier-glue-reset.yaml | 88 ++++++++++++++++++++++
> .../devicetree/bindings/reset/uniphier-reset.txt | 61 ---------------
> 2 files changed, 88 insertions(+), 61 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
> delete mode 100644 Documentation/devicetree/bindings/reset/uniphier-reset.txt
>
Reviewed-by: Rob Herring <[email protected]>
Hi Kunihiko,
On Wed, 2021-06-23 at 10:53 +0900, Kunihiko Hayashi wrote:
> Convert the UniPhier peripheral glue reset binding to DT schema format.
>
> Signed-off-by: Kunihiko Hayashi <[email protected]>
Thank you, applied to reset/next.
regards
Philipp