From: Mason Zhang <[email protected]>
This patch support tick_delay setting, some users need use
high-speed spi speed, which can use tick_delay to tuning spi clk timing.
Signed-off-by: Mason Zhang <[email protected]>
---
drivers/spi/spi-mt65xx.c | 11 ++++++++++-
include/linux/platform_data/spi-mt65xx.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 097625d7915e..b34fbc913fd6 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -42,8 +42,9 @@
#define SPI_CFG1_CS_IDLE_OFFSET 0
#define SPI_CFG1_PACKET_LOOP_OFFSET 8
#define SPI_CFG1_PACKET_LENGTH_OFFSET 16
-#define SPI_CFG1_GET_TICK_DLY_OFFSET 30
+#define SPI_CFG1_GET_TICK_DLY_OFFSET 29
+#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000
#define SPI_CFG1_CS_IDLE_MASK 0xff
#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
@@ -152,6 +153,7 @@ static const struct mtk_spi_compatible mt6893_compat = {
*/
static const struct mtk_chip_config mtk_default_chip_info = {
.sample_sel = 0,
+ .tick_delay = 0,
};
static const struct of_device_id mtk_spi_of_match[] = {
@@ -275,6 +277,13 @@ static int mtk_spi_prepare_message(struct spi_master *master,
writel(mdata->pad_sel[spi->chip_select],
mdata->base + SPI_PAD_SEL_REG);
+ /* tick delay */
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
+ reg_val |= ((chip_config->tick_delay & 0x7)
+ << SPI_CFG1_GET_TICK_DLY_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+
return 0;
}
diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h
index 65fd5ffd257c..f0db674f07b8 100644
--- a/include/linux/platform_data/spi-mt65xx.h
+++ b/include/linux/platform_data/spi-mt65xx.h
@@ -12,5 +12,6 @@
/* Board specific platform_data */
struct mtk_chip_config {
u32 sample_sel;
+ u32 tick_delay;
};
#endif
--
2.18.0
On Tue, 13 Jul 2021 19:40:49 +0800, Mason Zhang wrote:
> This patch support tick_delay setting, some users need use
> high-speed spi speed, which can use tick_delay to tuning spi clk timing.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/2] spi: mediatek: add tick_delay support
commit: f84d866ab43fcc27b417c86357d6534f157a3d89
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark