From: Voon Weifeng <[email protected]>
Implement Wake-on-LAN feature for 88X3310 and 88E2110.
This is done by enabling WoL interrupt and WoL detection and
configuring MAC address into WoL magic packet registers
Signed-off-by: Voon Weifeng <[email protected]>
Signed-off-by: Ling Pei Lee <[email protected]>
---
Change Log:
V3:
(1) Update the commit message which is suggested by Marek.
(2) Change patch title.
(3) Remove MV_V2_WOL_STS register definition where it is not used.
(4) Rename MV_V2_WOL_INTR_EN, MV_V2_WOL_CLEAR_STS and
MV_V2_WOL_MAGIC_PKT_EN.
(5) Move change log to signedoff below.
(6) Fix indention problem in code.
(7) Reorganize newly added register definition in recommeded order.
(8) Change function name from mv2110{get|set}_wol to mv3110{get|set}_wol.
(9) Fix mv3110{get|set}_wol characters exceed 80.
V2:
(1) Reviewer Marek request to rorganize code to readable way.
(2) Reviewer Rusell request to put phy_clear_bits_mmd() outside of if(){}else{}
and modify return ret to return phy_clear_bits_mmd().
(3) Reviewer Rusell request to add return on phy_read_mmd() in set_wol().
(4) Reorganize register layout to be put before MV_V2_TEMP_CTRL.
(5) Add the .{get|set}_wol for 88E3110 too as per feedback from Russell.
drivers/net/phy/marvell10g.c | 89 ++++++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 53a433442803..0b7cae118ad7 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -28,6 +28,7 @@
#include <linux/marvell_phy.h>
#include <linux/phy.h>
#include <linux/sfp.h>
+#include <linux/netdevice.h>
#define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
@@ -104,6 +105,16 @@ enum {
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5,
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6,
MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7,
+ MV_V2_PORT_INTR_STS = 0xf040,
+ MV_V2_PORT_INTR_MASK = 0xf043,
+ MV_V2_PORT_INTR_STS_WOL_EN = BIT(8),
+ MV_V2_MAGIC_PKT_WORD0 = 0xf06b,
+ MV_V2_MAGIC_PKT_WORD1 = 0xf06c,
+ MV_V2_MAGIC_PKT_WORD2 = 0xf06d,
+ /* Wake on LAN registers */
+ MV_V2_WOL_CTRL = 0xf06e,
+ MV_V2_WOL_CTRL_CLEAR_STS = BIT(15),
+ MV_V2_WOL_CTRL_MAGIC_PKT_EN = BIT(0),
/* Temperature control/read registers (88X3310 only) */
MV_V2_TEMP_CTRL = 0xf08a,
MV_V2_TEMP_CTRL_MASK = 0xc000,
@@ -1020,6 +1031,80 @@ static int mv2111_match_phy_device(struct phy_device *phydev)
return mv211x_match_phy_device(phydev, false);
}
+static void mv3110_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ int ret;
+
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_WOL_CTRL);
+ if (ret < 0)
+ return;
+
+ if (ret & MV_V2_WOL_CTRL_MAGIC_PKT_EN)
+ wol->wolopts |= WAKE_MAGIC;
+}
+
+static int mv3110_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ int ret;
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ /* Enable the WOL interrupt */
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_PORT_INTR_MASK,
+ MV_V2_PORT_INTR_STS_WOL_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Store the device address for the magic packet */
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_MAGIC_PKT_WORD2,
+ ((phydev->attached_dev->dev_addr[5] << 8) |
+ phydev->attached_dev->dev_addr[4]));
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_MAGIC_PKT_WORD1,
+ ((phydev->attached_dev->dev_addr[3] << 8) |
+ phydev->attached_dev->dev_addr[2]));
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_MAGIC_PKT_WORD0,
+ ((phydev->attached_dev->dev_addr[1] << 8) |
+ phydev->attached_dev->dev_addr[0]));
+ if (ret < 0)
+ return ret;
+
+ /* Clear WOL status and enable magic packet matching */
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_WOL_CTRL,
+ MV_V2_WOL_CTRL_MAGIC_PKT_EN |
+ MV_V2_WOL_CTRL_CLEAR_STS);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Disable magic packet matching & reset WOL status bit */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_WOL_CTRL,
+ MV_V2_WOL_CTRL_MAGIC_PKT_EN,
+ MV_V2_WOL_CTRL_CLEAR_STS);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Reset the clear WOL status bit as it does not self-clear */
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_WOL_CTRL,
+ MV_V2_WOL_CTRL_CLEAR_STS);
+}
+
static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88X3310,
@@ -1039,6 +1124,8 @@ static struct phy_driver mv3310_drivers[] = {
.set_tunable = mv3310_set_tunable,
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
+ .get_wol = mv3110_get_wol,
+ .set_wol = mv3110_set_wol,
},
{
.phy_id = MARVELL_PHY_ID_88X3310,
@@ -1076,6 +1163,8 @@ static struct phy_driver mv3310_drivers[] = {
.set_tunable = mv3310_set_tunable,
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
+ .get_wol = mv3110_get_wol,
+ .set_wol = mv3110_set_wol,
},
{
.phy_id = MARVELL_PHY_ID_88E2110,
--
2.25.1
Hello:
This patch was applied to netdev/net-next.git (refs/heads/master):
On Fri, 16 Jul 2021 21:46:45 +0800 you wrote:
> From: Voon Weifeng <[email protected]>
>
> Implement Wake-on-LAN feature for 88X3310 and 88E2110.
>
> This is done by enabling WoL interrupt and WoL detection and
> configuring MAC address into WoL magic packet registers
>
> [...]
Here is the summary with links:
- [net-next,resend,V3] net: phy: marvell10g: enable WoL for 88X3310 and 88E2110
https://git.kernel.org/netdev/net-next/c/08041a9af98c
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html