Some embedded platform shared PINs between USB and UART.
For example, some phone will use special cable detection in boot loader
to switch USB port function into UART mode. Hence Kernel need to query
the hardware state from PHY registers to confirm the initialzation flow
for PHY and USB driver.
To support this kind of PIN switch, new PHY MODE and query API is
required. Here we introduce a new PHY mode: PHY_MODE_UART.
API phy_get_mode_ext() can be used to query the MODE from hardware
instead of reading it from phy attributes.
Signed-off-by: Macpaul Lin <[email protected]>
---
drivers/phy/phy-core.c | 17 +++++++++++++++++
include/linux/phy/phy.h | 3 +++
2 files changed, 20 insertions(+)
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index ccb575b..b8f6539 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -373,6 +373,23 @@ int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
}
EXPORT_SYMBOL_GPL(phy_set_mode_ext);
+int phy_get_mode_ext(struct phy *phy)
+{
+ int ret;
+
+ if (!phy || !phy->ops->get_mode_ext)
+ return 0;
+
+ mutex_lock(&phy->mutex);
+ ret = phy->ops->get_mode_ext(phy);
+ if (!ret)
+ ret = phy->attrs.mode;
+ mutex_unlock(&phy->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phy_get_mode_ext);
+
int phy_set_media(struct phy *phy, enum phy_media media)
{
int ret;
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 0ed434d..7d32c6b 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -34,6 +34,7 @@ enum phy_mode {
PHY_MODE_USB_DEVICE_HS,
PHY_MODE_USB_DEVICE_SS,
PHY_MODE_USB_OTG,
+ PHY_MODE_UART,
PHY_MODE_UFS_HS_A,
PHY_MODE_UFS_HS_B,
PHY_MODE_PCIE,
@@ -70,6 +71,7 @@ enum phy_media {
* @power_on: powering on the phy
* @power_off: powering off the phy
* @set_mode: set the mode of the phy
+ * @get_mode_ext: get the extented mode of the phy
* @set_media: set the media type of the phy (optional)
* @set_speed: set the speed of the phy (optional)
* @reset: resetting the phy
@@ -83,6 +85,7 @@ struct phy_ops {
int (*power_on)(struct phy *phy);
int (*power_off)(struct phy *phy);
int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+ int (*get_mode_ext)(struct phy *phy);
int (*set_media)(struct phy *phy, enum phy_media media);
int (*set_speed)(struct phy *phy, int speed);
--
1.7.9.5
Some embedded platform shared PINs between USB and UART.
For example, some phone will use special cable detection in boot loader
to switch USB port function into UART mode.
This patch support USB2UART switch function in phy-mtk-tphy.
1. Implement USB2UART switch API support in phy-mtk-tphy.
2. Use PHY_MODE_UART support according to new mode in phy.h.
3. Use mtk_phy_get_mode_ext() to query the current MODE from hardware.
Signed-off-by: Macpaul Lin <[email protected]>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 114 +++++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cdbcc49..a7dfeec 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -68,6 +68,7 @@
#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
#define U3P_U2PHYACR4 0x020
+#define P2C_RG_USB20_DM_100K_EN BIT(17)
#define P2C_RG_USB20_GPIO_CTL BIT(9)
#define P2C_USB20_GPIO_MODE BIT(8)
#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
@@ -76,6 +77,12 @@
#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
#define U3P_U2PHYDTM0 0x068
+#define P2C_RG_UART_MODE GENMASK(31, 30)
+#define P2C_RG_UART_MODE_VAL(x) ((0x3 & (x)) << 30)
+#define P2C_RG_UART_MODE_OFET (30)
+#define P2C_FORCE_UART_I BIT(29)
+#define P2C_FORCE_UART_BIAS_EN BIT(28)
+#define P2C_FORCE_UART_TX_OE BIT(27)
#define P2C_FORCE_UART_EN BIT(26)
#define P2C_FORCE_DATAIN BIT(23)
#define P2C_FORCE_DM_PULLDOWN BIT(21)
@@ -98,6 +105,8 @@
P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
#define U3P_U2PHYDTM1 0x06C
+#define P2C_RG_UART_BIAS_EN BIT(18)
+#define P2C_RG_UART_TX_OE BIT(17)
#define P2C_RG_UART_EN BIT(16)
#define P2C_FORCE_IDDIG BIT(9)
#define P2C_RG_VBUSVALID BIT(5)
@@ -600,6 +609,90 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
}
}
+static void u2_phy_instance_set_mode_2uart(struct u2phy_banks *u2_banks)
+{
+ u32 tmp;
+
+ /* Clear PA6_RG_U2_BC11_SW_EN */
+ tmp = readl(u2_banks->com + U3P_USBPHYACR6);
+ tmp &= ~(PA6_RG_U2_BC11_SW_EN);
+ writel(tmp, u2_banks->com + U3P_USBPHYACR6);
+
+ /* Set P2C_RG_SUSPENDM */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_SUSPENDM */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_SUSPENDM;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Clear and Set P2C_RG_UART_MODE to 2'b01 */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_UART_MODE);
+ tmp |= P2C_RG_UART_MODE_VAL(0x1);
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Clear P2C_FORCE_UART_I */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_FORCE_UART_I);
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_UART_BIAS_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_UART_BIAS_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_UART_TX_OE */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_UART_TX_OE;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_FORCE_UART_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_FORCE_UART_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_UART_BIAS_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_UART_BIAS_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_UART_TX_OE */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_UART_TX_OE;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_UART_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_UART_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+
+ /* Set P2C_RG_USB20_DM_100K_EN */
+ tmp = readl(u2_banks->com + U3P_U2PHYACR4);
+ tmp |= P2C_RG_USB20_DM_100K_EN;
+ writel(tmp, u2_banks->com + U3P_U2PHYACR4);
+
+ /* Clear P2C_RG_DMPULLDOWN, P2C_RG_DPPULLDOWN */
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_DPPULLDOWN | P2C_RG_DMPULLDOWN);
+ writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
+}
+
+static int u2_phy_instance_get_mode_ext(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ u32 tmp;
+
+ tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
+
+ if ((tmp & P2C_RG_UART_MODE) >> P2C_RG_UART_MODE_OFET)
+ return PHY_MODE_UART;
+ else
+ return PHY_MODE_USB_OTG;
+}
+
static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance,
enum phy_mode mode)
@@ -609,6 +702,9 @@ static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
switch (mode) {
+ case PHY_MODE_UART:
+ u2_phy_instance_set_mode_2uart(u2_banks);
+ return;
case PHY_MODE_USB_DEVICE:
tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
break;
@@ -933,6 +1029,10 @@ static int mtk_phy_init(struct phy *phy)
return ret;
}
+ ret = u2_phy_instance_get_mode_ext(tphy, instance);
+ if (ret == PHY_MODE_UART)
+ return 0;
+
switch (instance->type) {
case PHY_TYPE_USB2:
u2_phy_instance_init(tphy, instance);
@@ -996,6 +1096,19 @@ static int mtk_phy_exit(struct phy *phy)
return 0;
}
+static int mtk_phy_get_mode_ext(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ ret = 0;
+ if (instance->type == PHY_TYPE_USB2)
+ ret = u2_phy_instance_get_mode_ext(tphy, instance);
+
+ return ret;
+}
+
static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -1060,6 +1173,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
.power_on = mtk_phy_power_on,
.power_off = mtk_phy_power_off,
.set_mode = mtk_phy_set_mode,
+ .get_mode_ext = mtk_phy_get_mode_ext,
.owner = THIS_MODULE,
};
--
1.7.9.5
On Tue, 2021-07-27 at 18:50 +0800, Macpaul Lin wrote:
> Some embedded platform shared PINs between USB and UART.
>
> For example, some phone will use special cable detection in boot loader
> to switch USB port function into UART mode. Hence Kernel need to query
> the hardware state from PHY registers to confirm the initialzation flow
> for PHY and USB driver.
>
> To support this kind of PIN switch, new PHY MODE and query API is
> required. Here we introduce a new PHY mode: PHY_MODE_UART.
>
> API phy_get_mode_ext() can be used to query the MODE from hardware
> instead of reading it from phy attributes.
>
> Signed-off-by: Macpaul Lin <[email protected]>
> ---
> drivers/phy/phy-core.c | 17 +++++++++++++++++
> include/linux/phy/phy.h | 3 +++
> 2 files changed, 20 insertions(+)
>
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index ccb575b..b8f6539 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -373,6 +373,23 @@ int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
> }
> EXPORT_SYMBOL_GPL(phy_set_mode_ext);
>
> +int phy_get_mode_ext(struct phy *phy)
> +{
> + int ret;
> +
> + if (!phy || !phy->ops->get_mode_ext)
> + return 0;
> +
> + mutex_lock(&phy->mutex);
> + ret = phy->ops->get_mode_ext(phy);
> + if (!ret)
> + ret = phy->attrs.mode;
> + mutex_unlock(&phy->mutex);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(phy_get_mode_ext);
> +
> int phy_set_media(struct phy *phy, enum phy_media media)
> {
> int ret;
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 0ed434d..7d32c6b 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -34,6 +34,7 @@ enum phy_mode {
> PHY_MODE_USB_DEVICE_HS,
> PHY_MODE_USB_DEVICE_SS,
> PHY_MODE_USB_OTG,
> + PHY_MODE_UART,
> PHY_MODE_UFS_HS_A,
> PHY_MODE_UFS_HS_B,
> PHY_MODE_PCIE,
> @@ -70,6 +71,7 @@ enum phy_media {
> * @power_on: powering on the phy
> * @power_off: powering off the phy
> * @set_mode: set the mode of the phy
> + * @get_mode_ext: get the extented mode of the phy
> * @set_media: set the media type of the phy (optional)
> * @set_speed: set the speed of the phy (optional)
> * @reset: resetting the phy
> @@ -83,6 +85,7 @@ struct phy_ops {
> int (*power_on)(struct phy *phy);
> int (*power_off)(struct phy *phy);
> int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
> + int (*get_mode_ext)(struct phy *phy);
> int (*set_media)(struct phy *phy, enum phy_media media);
> int (*set_speed)(struct phy *phy, int speed);
>
add prototype of phy_get_mode_ext(struct phy *phy) for both cases that
CONFIG_GENERIC_PHY is enabled or not in linux/phy/phy.h
On Tue, 2021-07-27 at 18:50 +0800, Macpaul Lin wrote:
> Some embedded platform shared PINs between USB and UART.
> For example, some phone will use special cable detection in boot loader
> to switch USB port function into UART mode.
>
> This patch support USB2UART switch function in phy-mtk-tphy.
> 1. Implement USB2UART switch API support in phy-mtk-tphy.
> 2. Use PHY_MODE_UART support according to new mode in phy.h.
> 3. Use mtk_phy_get_mode_ext() to query the current MODE from hardware.
>
> Signed-off-by: Macpaul Lin <[email protected]>
> ---
> drivers/phy/mediatek/phy-mtk-tphy.c | 114 +++++++++++++++++++++++++++++++++++
> 1 file changed, 114 insertions(+)
>
title: please use "phy: phy-mtk-tphy: ..." as other patches
> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> index cdbcc49..a7dfeec 100644
> --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> @@ -68,6 +68,7 @@
> #define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
>
> #define U3P_U2PHYACR4 0x020
> +#define P2C_RG_USB20_DM_100K_EN BIT(17)
> #define P2C_RG_USB20_GPIO_CTL BIT(9)
> #define P2C_USB20_GPIO_MODE BIT(8)
> #define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> @@ -76,6 +77,12 @@
> #define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
>
> #define U3P_U2PHYDTM0 0x068
> +#define P2C_RG_UART_MODE GENMASK(31, 30)
> +#define P2C_RG_UART_MODE_VAL(x) ((0x3 & (x)) << 30)
> +#define P2C_RG_UART_MODE_OFET (30)
> +#define P2C_FORCE_UART_I BIT(29)
> +#define P2C_FORCE_UART_BIAS_EN BIT(28)
> +#define P2C_FORCE_UART_TX_OE BIT(27)
> #define P2C_FORCE_UART_EN BIT(26)
> #define P2C_FORCE_DATAIN BIT(23)
> #define P2C_FORCE_DM_PULLDOWN BIT(21)
> @@ -98,6 +105,8 @@
> P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
>
> #define U3P_U2PHYDTM1 0x06C
> +#define P2C_RG_UART_BIAS_EN BIT(18)
> +#define P2C_RG_UART_TX_OE BIT(17)
> #define P2C_RG_UART_EN BIT(16)
> #define P2C_FORCE_IDDIG BIT(9)
> #define P2C_RG_VBUSVALID BIT(5)
> @@ -600,6 +609,90 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
> }
> }
>
> +static void u2_phy_instance_set_mode_2uart(struct u2phy_banks *u2_banks)
> +{
> + u32 tmp;
> +
> + /* Clear PA6_RG_U2_BC11_SW_EN */
remove the comments
> + tmp = readl(u2_banks->com + U3P_USBPHYACR6);
> + tmp &= ~(PA6_RG_U2_BC11_SW_EN);
> + writel(tmp, u2_banks->com + U3P_USBPHYACR6);
> +
> + /* Set P2C_RG_SUSPENDM */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_SUSPENDM;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_SUSPENDM */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_SUSPENDM;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Clear and Set P2C_RG_UART_MODE to 2'b01 */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp &= ~(P2C_RG_UART_MODE);
> + tmp |= P2C_RG_UART_MODE_VAL(0x1);
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Clear P2C_FORCE_UART_I */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp &= ~(P2C_FORCE_UART_I);
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_UART_BIAS_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_UART_BIAS_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_UART_TX_OE */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_UART_TX_OE;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_FORCE_UART_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_FORCE_UART_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_UART_BIAS_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_UART_BIAS_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_UART_TX_OE */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_UART_TX_OE;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_UART_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp |= P2C_RG_UART_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +
> + /* Set P2C_RG_USB20_DM_100K_EN */
> + tmp = readl(u2_banks->com + U3P_U2PHYACR4);
> + tmp |= P2C_RG_USB20_DM_100K_EN;
> + writel(tmp, u2_banks->com + U3P_U2PHYACR4);
> +
> + /* Clear P2C_RG_DMPULLDOWN, P2C_RG_DPPULLDOWN */
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> + tmp &= ~(P2C_RG_DPPULLDOWN | P2C_RG_DMPULLDOWN);
> + writel(tmp, u2_banks->com + U3P_U2PHYDTM0);
> +}
> +
> +static int u2_phy_instance_get_mode_ext(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
> +{
> + struct u2phy_banks *u2_banks = &instance->u2_banks;
> + u32 tmp;
> +
> + tmp = readl(u2_banks->com + U3P_U2PHYDTM0);
> +
> + if ((tmp & P2C_RG_UART_MODE) >> P2C_RG_UART_MODE_OFET)
> + return PHY_MODE_UART;
> + else
> + return PHY_MODE_USB_OTG;
> +}
> +
> static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
> struct mtk_phy_instance *instance,
> enum phy_mode mode)
> @@ -609,6 +702,9 @@ static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
>
> tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
> switch (mode) {
> + case PHY_MODE_UART:
> + u2_phy_instance_set_mode_2uart(u2_banks);
How do you use this helper?
Can we switch back to usb phy mode if switching to uart?
When switch to uart mode, if the host supports multi-ports, it will
cause the host can't enter sleep mode anymore.
> + return;
> case PHY_MODE_USB_DEVICE:
> tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
> break;
> @@ -933,6 +1029,10 @@ static int mtk_phy_init(struct phy *phy)
> return ret;
> }
>
> + ret = u2_phy_instance_get_mode_ext(tphy, instance);
> + if (ret == PHY_MODE_UART)
> + return 0;
> +
> switch (instance->type) {
> case PHY_TYPE_USB2:
> u2_phy_instance_init(tphy, instance);
> @@ -996,6 +1096,19 @@ static int mtk_phy_exit(struct phy *phy)
> return 0;
> }
>
> +static int mtk_phy_get_mode_ext(struct phy *phy)
> +{
> + struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
> + int ret;
> +
> + ret = 0;
> + if (instance->type == PHY_TYPE_USB2)
> + ret = u2_phy_instance_get_mode_ext(tphy, instance);
> +
> + return ret;
> +}
> +
> static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> {
> struct mtk_phy_instance *instance = phy_get_drvdata(phy);
> @@ -1060,6 +1173,7 @@ static struct phy *mtk_phy_xlate(struct device *dev,
> .power_on = mtk_phy_power_on,
> .power_off = mtk_phy_power_off,
> .set_mode = mtk_phy_set_mode,
> + .get_mode_ext = mtk_phy_get_mode_ext,
> .owner = THIS_MODULE,
> };
>