The trc_wait_for_one_reader() function is called at multiple stages
of trace rcu-tasks GP function, rcu_tasks_wait_gp():
- First, it is called as part of per task function -
rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task
processing, this function add the task in the holdout list and if the
task is currently running on a CPU, it sends IPI to the task's CPU.
The IPI handler takes action depending on whether task is in trace
rcu-tasks read side critical section or not:
- a. If the task is in trace rcu-tasks read side critical section
(t->trc_reader_nesting != 0), the IPI handler sets the task's
->trc_reader_special.b.need_qs, so that this task notifies exit
from its outermost read side critical section (by decrementing
trc_n_readers_need_end) to the GP handling function.
trc_wait_for_one_reader() also increments trc_n_readers_need_end,
so that the trace rcu-tasks GP handler function waits for this
task's read side exit notification. The IPI handler also sets
t->trc_reader_checked to true, and no further IPIs are sent for
this task, for this trace rcu-tasks grace period and this
task can be removed from holdout list.
- b. If the task is in the process of exiting its trace rcu-tasks
read side critical section, (t->trc_reader_nesting < 0), defer
this task's processing to future calls to trc_wait_for_one_reader().
- c. If task is not in rcu-task read side critical section,
t->trc_reader_nesting == 0, ->trc_reader_checked is set for this
task, so that, this task is removed from holdout list.
- Second, trc_wait_for_one_reader() is called as part of post scan, in
function rcu_tasks_trace_postscan(), for all idle tasks.
- Third, in function check_all_holdout_tasks_trace(), for each task in
the holdout list, this function is called, if there isn't a pending IPI
for the task (->trc_ipi_to_cpu == -1). This function removed the task
from holdout list, if IPI handler has completed the required work,
to ensure that the current trace rcu-tasks grace period either waits
for this task, or this task is not in a trace rcu-tasks read side
critical section.
Now, considering the scenario where smp_call_function_single() fails in
first case, inside rcu_tasks_trace_pertask(). In this case,
->trc_ipi_to_cpu is set to the current CPU for that task. This will
result in trc_wait_for_one_reader() getting skipped in third case,
inside check_all_holdout_tasks_trace(), for this task. This further
results in ->trc_reader_checked never getting set for this task,
and the task not getting removed from holdout list. This can cause
the current trace rcu-tasks grace period to stall.
Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on
smp_call_function_single() failure, so that future IPI calls can
be send for this task. As all three callers (rcu_tasks_trace_pertask(),
rcu_tasks_trace_postscan(), check_all_holdout_tasks_trace())
of trc_wait_for_one_reader() run with CPU read lock held,
smp_call_function_single() cannot race with CPU hotplug. So,
also add a warning, to report and identify any such failure.
Signed-off-by: Neeraj Upadhyay <[email protected]>
---
Ran rcutorture TRACE01 tree for 10 hrs with below commandline, didn't
observe warning:
Command line: debug_boot_weak_hash panic=-1 selinux=0 initcall_debug debug
console=ttyS0 rcutree.rcu_fanout_leaf=4 nohz_full=1-N rcutorture.onoff_interval=1000
rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15
rcutorture.shutdown_secs=36000 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1
rcutorture.torture_type=tasks-tracing
kernel/rcu/tasks.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index e6f0def..c110fd0 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -1014,9 +1014,11 @@ static void trc_wait_for_one_reader(struct task_struct *t,
if (smp_call_function_single(cpu, trc_read_check_handler, t, 0)) {
// Just in case there is some other reason for
// failure than the target CPU being offline.
+ WARN_ONCE(1, "%s(): smp_call_function_single() failed for CPU: %d\n",
+ __func__, cpu);
rcu_tasks_trace.n_ipis_fails++;
per_cpu(trc_ipi_to_cpu, cpu) = false;
- t->trc_ipi_to_cpu = cpu;
+ t->trc_ipi_to_cpu = -1;
}
}
}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
On Fri, Aug 27, 2021 at 01:43:35PM +0530, Neeraj Upadhyay wrote:
> The trc_wait_for_one_reader() function is called at multiple stages
> of trace rcu-tasks GP function, rcu_tasks_wait_gp():
>
> - First, it is called as part of per task function -
> rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task
> processing, this function add the task in the holdout list and if the
> task is currently running on a CPU, it sends IPI to the task's CPU.
> The IPI handler takes action depending on whether task is in trace
> rcu-tasks read side critical section or not:
>
> - a. If the task is in trace rcu-tasks read side critical section
> (t->trc_reader_nesting != 0), the IPI handler sets the task's
> ->trc_reader_special.b.need_qs, so that this task notifies exit
> from its outermost read side critical section (by decrementing
> trc_n_readers_need_end) to the GP handling function.
> trc_wait_for_one_reader() also increments trc_n_readers_need_end,
> so that the trace rcu-tasks GP handler function waits for this
> task's read side exit notification. The IPI handler also sets
> t->trc_reader_checked to true, and no further IPIs are sent for
> this task, for this trace rcu-tasks grace period and this
> task can be removed from holdout list.
>
> - b. If the task is in the process of exiting its trace rcu-tasks
> read side critical section, (t->trc_reader_nesting < 0), defer
> this task's processing to future calls to trc_wait_for_one_reader().
>
> - c. If task is not in rcu-task read side critical section,
> t->trc_reader_nesting == 0, ->trc_reader_checked is set for this
> task, so that, this task is removed from holdout list.
>
> - Second, trc_wait_for_one_reader() is called as part of post scan, in
> function rcu_tasks_trace_postscan(), for all idle tasks.
>
> - Third, in function check_all_holdout_tasks_trace(), for each task in
> the holdout list, this function is called, if there isn't a pending IPI
> for the task (->trc_ipi_to_cpu == -1). This function removed the task
> from holdout list, if IPI handler has completed the required work,
> to ensure that the current trace rcu-tasks grace period either waits
> for this task, or this task is not in a trace rcu-tasks read side
> critical section.
>
> Now, considering the scenario where smp_call_function_single() fails in
> first case, inside rcu_tasks_trace_pertask(). In this case,
> ->trc_ipi_to_cpu is set to the current CPU for that task. This will
> result in trc_wait_for_one_reader() getting skipped in third case,
> inside check_all_holdout_tasks_trace(), for this task. This further
> results in ->trc_reader_checked never getting set for this task,
> and the task not getting removed from holdout list. This can cause
> the current trace rcu-tasks grace period to stall.
>
> Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on
> smp_call_function_single() failure, so that future IPI calls can
> be send for this task. As all three callers (rcu_tasks_trace_pertask(),
> rcu_tasks_trace_postscan(), check_all_holdout_tasks_trace())
> of trc_wait_for_one_reader() run with CPU read lock held,
> smp_call_function_single() cannot race with CPU hotplug. So,
> also add a warning, to report and identify any such failure.
>
> Signed-off-by: Neeraj Upadhyay <[email protected]>
> ---
>
> Ran rcutorture TRACE01 tree for 10 hrs with below commandline, didn't
> observe warning:
>
> Command line: debug_boot_weak_hash panic=-1 selinux=0 initcall_debug debug
> console=ttyS0 rcutree.rcu_fanout_leaf=4 nohz_full=1-N rcutorture.onoff_interval=1000
> rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15
> rcutorture.shutdown_secs=36000 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1
> rcutorture.torture_type=tasks-tracing
Very good, thank you!
I queued this for v5.16 (not the upcoming merge window, but the one after
that) and for review and further testing. I did a little wordsmithing,
so could you please check to make sure that I didn't mess something up?
Thanx, Paul
------------------------------------------------------------------------
commit 2717b14fb5fc57e5f131cc0bac26c85fc03a0cd2
Author: Neeraj Upadhyay <[email protected]>
Date: Fri Aug 27 13:43:35 2021 +0530
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
The trc_wait_for_one_reader() function is called at multiple stages
of trace rcu-tasks GP function, rcu_tasks_wait_gp():
- First, it is called as part of per task function -
rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task
processing, this function add the task in the holdout list and if the
task is currently running on a CPU, it sends IPI to the task's CPU.
The IPI handler takes action depending on whether task is in trace
rcu-tasks read side critical section or not:
- a. If the task is in trace rcu-tasks read side critical section
(t->trc_reader_nesting != 0), the IPI handler sets the task's
->trc_reader_special.b.need_qs, so that this task notifies exit
from its outermost read side critical section (by decrementing
trc_n_readers_need_end) to the GP handling function.
trc_wait_for_one_reader() also increments trc_n_readers_need_end,
so that the trace rcu-tasks GP handler function waits for this
task's read side exit notification. The IPI handler also sets
t->trc_reader_checked to true, and no further IPIs are sent for
this task, for this trace rcu-tasks grace period and this
task can be removed from holdout list.
- b. If the task is in the process of exiting its trace rcu-tasks
read side critical section, (t->trc_reader_nesting < 0), defer
this task's processing to future calls to trc_wait_for_one_reader().
- c. If task is not in rcu-task read side critical section,
t->trc_reader_nesting == 0, ->trc_reader_checked is set for this
task, so that this task is removed from holdout list.
- Second, trc_wait_for_one_reader() is called as part of post scan, in
function rcu_tasks_trace_postscan(), for all idle tasks.
- Third, in function check_all_holdout_tasks_trace(), this function is
called for each task in the holdout list, but only if there isn't
a pending IPI for the task (->trc_ipi_to_cpu == -1). This function
removed the task from holdout list, if IPI handler has completed the
required work, to ensure that the current trace rcu-tasks grace period
either waits for this task, or this task is not in a trace rcu-tasks
read side critical section.
Now, considering the scenario where smp_call_function_single() fails in
first case, inside rcu_tasks_trace_pertask(). In this case,
->trc_ipi_to_cpu is set to the current CPU for that task. This will
result in trc_wait_for_one_reader() getting skipped in third case,
inside check_all_holdout_tasks_trace(), for this task. This further
results in ->trc_reader_checked never getting set for this task,
and the task not getting removed from holdout list. This can cause
the current trace rcu-tasks grace period to stall.
Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on
smp_call_function_single() failure, so that future IPI calls can
be send for this task.
Note that all three of the trc_wait_for_one_reader() function's
callers (rcu_tasks_trace_pertask(), rcu_tasks_trace_postscan(),
check_all_holdout_tasks_trace()) hold cpu_read_lock(). This means
that smp_call_function_single() cannot race with CPU hotplug, and thus
should never fail. Therefore, also add a warning in order to report
any such failure in case smp_call_function_single() grows some other
reason for failure.
Signed-off-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index e6f0def1cb60..c110fd080c5b 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -1014,9 +1014,11 @@ static void trc_wait_for_one_reader(struct task_struct *t,
if (smp_call_function_single(cpu, trc_read_check_handler, t, 0)) {
// Just in case there is some other reason for
// failure than the target CPU being offline.
+ WARN_ONCE(1, "%s(): smp_call_function_single() failed for CPU: %d\n",
+ __func__, cpu);
rcu_tasks_trace.n_ipis_fails++;
per_cpu(trc_ipi_to_cpu, cpu) = false;
- t->trc_ipi_to_cpu = cpu;
+ t->trc_ipi_to_cpu = -1;
}
}
}