The load state power-domain, used by the co-processors to notify the
Always on Subsystem (AOSS) that a particular co-processor is up/down,
suffers from the side-effect of changing states during suspend/resume.
However the co-processors enter low-power modes independent to that of
the application processor and their states are expected to remain
unaltered across system suspend/resume cycles. To achieve this behavior
let's drop the load state power-domain and replace them with the qmp
property for all SoCs supporting low power mode signalling.
Due to the current broken load state implementation, we can afford the
binding breakage that ensues and the remoteproc functionality will remain
the same when using newer kernels with older dtbs.
Signed-off-by: Sibi Sankar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
---
v7:
* Set "qcom,qmp" property to false for unsupported devices. [Rob]
.../devicetree/bindings/remoteproc/qcom,adsp.yaml | 54 ++++++++++------------
1 file changed, 24 insertions(+), 30 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 0c112f3264a9..ff265aa365de 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -93,6 +93,10 @@ properties:
maxItems: 1
description: Reference to the reserved-memory for the Hexagon core
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
qcom,smem-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: States used by the AP to signal the Hexagon core
@@ -369,13 +373,11 @@ allOf:
properties:
power-domains:
items:
- - description: Load State power domain
- description: CX power domain
- description: MX power domain
- description: MSS power domain
power-domain-names:
items:
- - const: load_state
- const: cx
- const: mx
- const: mss
@@ -391,43 +393,20 @@ allOf:
properties:
power-domains:
items:
- - description: Load State power domain
- description: CX power domain
- power-domain-names:
- items:
- - const: load_state
- - const: cx
- if:
properties:
compatible:
contains:
enum:
+ - qcom,sdx55-mpss-pas
- qcom,sm8150-mpss-pas
- qcom,sm8350-mpss-pas
then:
properties:
power-domains:
items:
- - description: Load State power domain
- - description: CX power domain
- - description: MSS power domain
- power-domain-names:
- items:
- - const: load_state
- - const: cx
- - const: mss
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sdx55-mpss-pas
- then:
- properties:
- power-domains:
- items:
- description: CX power domain
- description: MSS power domain
power-domain-names:
@@ -451,12 +430,10 @@ allOf:
properties:
power-domains:
items:
- - description: Load State power domain
- description: LCX power domain
- description: LMX power domain
power-domain-names:
items:
- - const: load_state
- const: lcx
- const: lmx
@@ -470,12 +447,10 @@ allOf:
properties:
power-domains:
items:
- - description: Load State power domain
- description: CX power domain
- description: MXC power domain
power-domain-names:
items:
- - const: load_state
- const: cx
- const: mxc
@@ -511,6 +486,25 @@ allOf:
- const: mss_restart
- const: pdc_reset
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8974-adsp-pil
+ - qcom,msm8996-adsp-pil
+ - qcom,msm8996-slpi-pil
+ - qcom,msm8998-adsp-pas
+ - qcom,msm8998-slpi-pas
+ - qcom,qcs404-adsp-pas
+ - qcom,qcs404-cdsp-pas
+ - qcom,qcs404-wcss-pas
+ - qcom,sdm660-adsp-pas
+ - qcom,sdx55-mpss-pas
+ then:
+ properties:
+ qcom,qmp: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmcc.h>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On Thu, 16 Sep 2021 19:29:19 +0530, Sibi Sankar wrote:
> The load state power-domain, used by the co-processors to notify the
> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> suffers from the side-effect of changing states during suspend/resume.
> However the co-processors enter low-power modes independent to that of
> the application processor and their states are expected to remain
> unaltered across system suspend/resume cycles. To achieve this behavior
> let's drop the load state power-domain and replace them with the qmp
> property for all SoCs supporting low power mode signalling.
>
> Due to the current broken load state implementation, we can afford the
> binding breakage that ensues and the remoteproc functionality will remain
> the same when using newer kernels with older dtbs.
>
> Signed-off-by: Sibi Sankar <[email protected]>
> Reviewed-by: Stephen Boyd <[email protected]>
> ---
>
> v7:
> * Set "qcom,qmp" property to false for unsupported devices. [Rob]
>
> .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 54 ++++++++++------------
> 1 file changed, 24 insertions(+), 30 deletions(-)
>
Reviewed-by: Rob Herring <[email protected]>
On Thu, 16 Sep 2021 19:29:19 +0530, Sibi Sankar wrote:
> The load state power-domain, used by the co-processors to notify the
> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> suffers from the side-effect of changing states during suspend/resume.
> However the co-processors enter low-power modes independent to that of
> the application processor and their states are expected to remain
> unaltered across system suspend/resume cycles. To achieve this behavior
> let's drop the load state power-domain and replace them with the qmp
> property for all SoCs supporting low power mode signalling.
>
> [...]
Applied, thanks!
[02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
commit: e73c632b18a936b5489068d2418a58ea95b49469
Best regards,
--
Bjorn Andersson <[email protected]>