From: Stefan Binding <[email protected]>
Some headsets require very different comparator thresholds for type detection,
as well as longer settling times. In order to detect a larger number of headsets,
use 2 thresholds to give maximum coverage (1.25V and 1.75V), as well as a longer
settling time of 100ms. This will not affect default audotodetect mode
and applies to manual mode type detection only.
Signed-off-by: Stefan Binding <[email protected]>
Signed-off-by: Vitaly Rodionov <[email protected]>
---
sound/soc/codecs/cs42l42.c | 84 +++++++++++++++++++++++++++-----------
sound/soc/codecs/cs42l42.h | 5 +++
2 files changed, 66 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 78f8c89410b6..3f202acd4a8e 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1048,7 +1048,8 @@ static struct snd_soc_dai_driver cs42l42_dai = {
static void cs42l42_manual_hs_type_detect(struct cs42l42_private *cs42l42)
{
unsigned int hs_det_status;
- unsigned int hs_det_comp;
+ unsigned int hs_det_comp1;
+ unsigned int hs_det_comp2;
unsigned int hs_det_sw;
/* Set hs detect to manual, active mode */
@@ -1063,23 +1064,40 @@ static void cs42l42_manual_hs_type_detect(struct cs42l42_private *cs42l42)
(0 << CS42L42_HSBIAS_REF_SHIFT) |
(0 << CS42L42_HSDET_AUTO_TIME_SHIFT));
+ /* Configure HS DET comparator reference levels. */
+ regmap_update_bits(cs42l42->regmap,
+ CS42L42_HSDET_CTL1,
+ CS42L42_HSDET_COMP1_LVL_MASK |
+ CS42L42_HSDET_COMP2_LVL_MASK,
+ (CS42L42_HSDET_COMP1_LVL_VAL << CS42L42_HSDET_COMP1_LVL_SHIFT) |
+ (CS42L42_HSDET_COMP2_LVL_VAL << CS42L42_HSDET_COMP2_LVL_SHIFT));
+
/* Open the SW_HSB_HS3 switch and close SW_HSB_HS4 for a Type 1 headset. */
regmap_write(cs42l42->regmap, CS42L42_HS_SWITCH_CTL, CS42L42_HSDET_SW_COMP1);
+ msleep(100);
+
regmap_read(cs42l42->regmap, CS42L42_HS_DET_STATUS, &hs_det_status);
- hs_det_comp = (hs_det_status & CS42L42_HSDET_COMP1_OUT_MASK) >>
+ hs_det_comp1 = (hs_det_status & CS42L42_HSDET_COMP1_OUT_MASK) >>
CS42L42_HSDET_COMP1_OUT_SHIFT;
+ hs_det_comp2 = (hs_det_status & CS42L42_HSDET_COMP2_OUT_MASK) >>
+ CS42L42_HSDET_COMP2_OUT_SHIFT;
/* Close the SW_HSB_HS3 switch for a Type 2 headset. */
regmap_write(cs42l42->regmap, CS42L42_HS_SWITCH_CTL, CS42L42_HSDET_SW_COMP2);
+ msleep(100);
+
regmap_read(cs42l42->regmap, CS42L42_HS_DET_STATUS, &hs_det_status);
- hs_det_comp |= ((hs_det_status & CS42L42_HSDET_COMP2_OUT_MASK) >>
+ hs_det_comp1 |= ((hs_det_status & CS42L42_HSDET_COMP1_OUT_MASK) >>
+ CS42L42_HSDET_COMP1_OUT_SHIFT) << 1;
+ hs_det_comp2 |= ((hs_det_status & CS42L42_HSDET_COMP2_OUT_MASK) >>
CS42L42_HSDET_COMP2_OUT_SHIFT) << 1;
- switch (hs_det_comp) {
+ /* Use Comparator 1 with 1.25V Threshold. */
+ switch (hs_det_comp1) {
case CS42L42_HSDET_COMP_TYPE1:
cs42l42->hs_type = CS42L42_PLUG_CTIA;
hs_det_sw = CS42L42_HSDET_SW_TYPE1;
@@ -1088,14 +1106,26 @@ static void cs42l42_manual_hs_type_detect(struct cs42l42_private *cs42l42)
cs42l42->hs_type = CS42L42_PLUG_OMTP;
hs_det_sw = CS42L42_HSDET_SW_TYPE2;
break;
- case CS42L42_HSDET_COMP_TYPE3:
- cs42l42->hs_type = CS42L42_PLUG_HEADPHONE;
- hs_det_sw = CS42L42_HSDET_SW_TYPE3;
- break;
default:
- cs42l42->hs_type = CS42L42_PLUG_INVALID;
- hs_det_sw = CS42L42_HSDET_SW_TYPE4;
- break;
+ /* Fallback to Comparator 2 with 1.75V Threshold. */
+ switch (hs_det_comp2) {
+ case CS42L42_HSDET_COMP_TYPE1:
+ cs42l42->hs_type = CS42L42_PLUG_CTIA;
+ hs_det_sw = CS42L42_HSDET_SW_TYPE1;
+ break;
+ case CS42L42_HSDET_COMP_TYPE2:
+ cs42l42->hs_type = CS42L42_PLUG_OMTP;
+ hs_det_sw = CS42L42_HSDET_SW_TYPE2;
+ break;
+ case CS42L42_HSDET_COMP_TYPE3:
+ cs42l42->hs_type = CS42L42_PLUG_HEADPHONE;
+ hs_det_sw = CS42L42_HSDET_SW_TYPE3;
+ break;
+ default:
+ cs42l42->hs_type = CS42L42_PLUG_INVALID;
+ hs_det_sw = CS42L42_HSDET_SW_TYPE4;
+ break;
+ }
}
/* Set Switches */
@@ -1112,6 +1142,14 @@ static void cs42l42_manual_hs_type_detect(struct cs42l42_private *cs42l42)
(0 << CS42L42_HSDET_SET_SHIFT) |
(0 << CS42L42_HSBIAS_REF_SHIFT) |
(0 << CS42L42_HSDET_AUTO_TIME_SHIFT));
+
+ /* Configure HS DET comparator reference levels. */
+ regmap_update_bits(cs42l42->regmap,
+ CS42L42_HSDET_CTL1,
+ CS42L42_HSDET_COMP1_LVL_MASK |
+ CS42L42_HSDET_COMP2_LVL_MASK,
+ (CS42L42_HSDET_COMP1_LVL_DEFAULT << CS42L42_HSDET_COMP1_LVL_SHIFT) |
+ (CS42L42_HSDET_COMP2_LVL_DEFAULT << CS42L42_HSDET_COMP2_LVL_SHIFT));
}
static void cs42l42_process_hs_type_detect(struct cs42l42_private *cs42l42)
@@ -1134,6 +1172,18 @@ static void cs42l42_process_hs_type_detect(struct cs42l42_private *cs42l42)
cs42l42->hs_type = (hs_det_status & CS42L42_HSDET_TYPE_MASK) >>
CS42L42_HSDET_TYPE_SHIFT;
+ /* Set hs detect to automatic, disabled mode */
+ regmap_update_bits(cs42l42->regmap,
+ CS42L42_HSDET_CTL2,
+ CS42L42_HSDET_CTRL_MASK |
+ CS42L42_HSDET_SET_MASK |
+ CS42L42_HSBIAS_REF_MASK |
+ CS42L42_HSDET_AUTO_TIME_MASK,
+ (2 << CS42L42_HSDET_CTRL_SHIFT) |
+ (2 << CS42L42_HSDET_SET_SHIFT) |
+ (0 << CS42L42_HSBIAS_REF_SHIFT) |
+ (3 << CS42L42_HSDET_AUTO_TIME_SHIFT));
+
/* Run Manual detection if auto detect has not found a headset.
* We Re-Run with Manual Detection if the original detection was invalid or headphones,
* to ensure that a headset mic is detected in all cases.
@@ -1142,18 +1192,6 @@ static void cs42l42_process_hs_type_detect(struct cs42l42_private *cs42l42)
cs42l42->hs_type == CS42L42_PLUG_HEADPHONE) {
dev_dbg(cs42l42->component->dev, "Running Manual Detection Fallback\n");
cs42l42_manual_hs_type_detect(cs42l42);
- } else {
- /* Set hs detect to automatic, disabled mode */
- regmap_update_bits(cs42l42->regmap,
- CS42L42_HSDET_CTL2,
- CS42L42_HSDET_CTRL_MASK |
- CS42L42_HSDET_SET_MASK |
- CS42L42_HSBIAS_REF_MASK |
- CS42L42_HSDET_AUTO_TIME_MASK,
- (2 << CS42L42_HSDET_CTRL_SHIFT) |
- (2 << CS42L42_HSDET_SET_SHIFT) |
- (0 << CS42L42_HSBIAS_REF_SHIFT) |
- (3 << CS42L42_HSDET_AUTO_TIME_SHIFT));
}
/* Set up button detection */
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 2aeabba73e05..0704c902475f 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -188,6 +188,11 @@
#define CS42L42_HSDET_COMP2_LVL_SHIFT 4
#define CS42L42_HSDET_COMP2_LVL_MASK (15 << CS42L42_HSDET_COMP2_LVL_SHIFT)
+#define CS42L42_HSDET_COMP1_LVL_VAL 12 /* 1.25V Comparator */
+#define CS42L42_HSDET_COMP2_LVL_VAL 2 /* 1.75V Comparator */
+#define CS42L42_HSDET_COMP1_LVL_DEFAULT 7 /* 1V Comparator */
+#define CS42L42_HSDET_COMP2_LVL_DEFAULT 7 /* 2V Comparator */
+
#define CS42L42_HSDET_CTL2 (CS42L42_PAGE_11 + 0x20)
#define CS42L42_HSDET_AUTO_TIME_SHIFT 0
#define CS42L42_HSDET_AUTO_TIME_MASK (3 << CS42L42_HSDET_AUTO_TIME_SHIFT)
--
2.25.1
On Mon, 27 Sep 2021 12:14:37 +0100, Vitaly Rodionov wrote:
> From: Stefan Binding <[email protected]>
>
> Some headsets require very different comparator thresholds for type detection,
> as well as longer settling times. In order to detect a larger number of headsets,
> use 2 thresholds to give maximum coverage (1.25V and 1.75V), as well as a longer
> settling time of 100ms. This will not affect default audotodetect mode
> and applies to manual mode type detection only.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: cs42l42: Use two thresholds and increased wait time for manual type detection
commit: edd6dffdc6670836909972b32a324dbf6c150757
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark