This patchset fills in 'otg_caps' of the usb_gadget structure, and
configures it on stm32mp15.
When dwc2 is configured as dual role (OTG), the USB gadget descriptors
(device mode) are configured via configfs. This lead in calling
usb_otg_descriptor_init().
In usb_otg_descriptor_init() (drivers/usb/gadget/config.c):
- If otg caps structure is provided -> use it
- If otg caps structure isn't provided -> HNP and SRP are enabled by default
This could lead to a configuration mismatch beetween:
- OTG controller: HNP and SRP aren't enabled
- gadget descriptors: HNP and SRP are advertised
---
Changes in v3:
- Add dt-bindings patch, as adding properties from usb-drd.yaml is
currently not handled in dwc2.yaml. This lead to have
"make dtbs_check" reports errors like:
...'otg-rev' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /local/home/fgasni00/baseline/linux-stm32/Documentation/devicetree/bindings/usb/dwc2.yaml
- Could/should the dt-bindings be ported to stable ?
(the DT patch for stm32mp151 in v1 got merged already)
Changes in v2:
- replace otg_cap bit field by otg_caps structure.
- Fix build issue when HOST only mode is selected [1]
- DT patch for stm32mp151 merged in v1, so not resent
[1] https://lore.kernel.org/all/[email protected]
Fabrice Gasnier (4):
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
usb: dwc2: add otg_rev and otg_caps information for gadget driver
usb: dwc2: stm32mp15: set otg_rev
Documentation/devicetree/bindings/usb/dwc2.yaml | 16 ++++--
drivers/usb/dwc2/core.h | 19 +++----
drivers/usb/dwc2/debugfs.c | 4 +-
drivers/usb/dwc2/gadget.c | 1 +
drivers/usb/dwc2/hcd.c | 12 ++--
drivers/usb/dwc2/params.c | 75 ++++++++++++++-----------
6 files changed, 70 insertions(+), 57 deletions(-)
--
2.7.4
Currently the dwc2 doesn't fill in the 'otg_caps' of usb_gadget structure.
When registering a gadget device (e.g. via configfs), the
usb_otg_descriptor_init() checks the 'otg_caps' and 'otg_rev'. It defaults
to HNP and SRP bmAttributes if unspecified. There may be a mismatch with
what's being set in dwc2 params structure. This result in the descriptors
to be miss-configured in this case.
So replace 'otg_cap' bit field by 'otg_caps' structure, so hnp, srp and
otg_rev' can be configured directly in the params.
It's then provided to the gadget struct. These parameters can be tuned
for each platform. In case it's not set, it will default to current
behavior.
Also add option to setup these from the device tree by calling
of_usb_update_otg_caps(). This provides support for standard properties
such as "otg-rev", "hnp-disable" and "srp-disable" (see usb-drd.yaml).
Signed-off-by: Fabrice Gasnier <[email protected]>
---
Changes in v2:
- replace otg_cap bit field by otg_caps structure.
- Fix build issue when HOST only configuration
error: 'struct dwc2_hsotg' has no member named 'dw_otg_caps'
(e.g. CONFIG_USB_DWC2_PERIPHERAL / CONFIG_USB_DWC2_DUAL_ROLE aren't set)
otg_caps is now a member of dwc2_core_params
---
drivers/usb/dwc2/core.h | 19 ++++++------
drivers/usb/dwc2/debugfs.c | 4 ++-
drivers/usb/dwc2/gadget.c | 1 +
drivers/usb/dwc2/hcd.c | 12 +++-----
drivers/usb/dwc2/params.c | 73 +++++++++++++++++++++++++---------------------
5 files changed, 57 insertions(+), 52 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index cb9059a..37185eb 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -238,11 +238,14 @@ enum dwc2_ep0_state {
/**
* struct dwc2_core_params - Parameters for configuring the core
*
- * @otg_cap: Specifies the OTG capabilities.
- * 0 - HNP and SRP capable
- * 1 - SRP Only capable
- * 2 - No HNP/SRP capable (always available)
- * Defaults to best available option (0, 1, then 2)
+ * @otg_caps: Specifies the OTG capabilities. OTG caps from the platform parameters,
+ * used to setup the:
+ * - HNP and SRP capable
+ * - SRP Only capable
+ * - No HNP/SRP capable (always available)
+ * Defaults to best available option
+ * - OTG revision number the device is compliant with, in binary-coded
+ * decimal (i.e. 2.0 is 0200H). (see struct usb_otg_caps)
* @host_dma: Specifies whether to use slave or DMA mode for accessing
* the data FIFOs. The driver will automatically detect the
* value for this parameter if none is specified.
@@ -453,11 +456,7 @@ enum dwc2_ep0_state {
* default described above.
*/
struct dwc2_core_params {
- u8 otg_cap;
-#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0
-#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1
-#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-
+ struct usb_otg_caps otg_caps;
u8 phy_type;
#define DWC2_PHY_TYPE_PARAM_FS 0
#define DWC2_PHY_TYPE_PARAM_UTMI 1
diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
index f13eed4..1d72ece 100644
--- a/drivers/usb/dwc2/debugfs.c
+++ b/drivers/usb/dwc2/debugfs.c
@@ -670,7 +670,9 @@ static int params_show(struct seq_file *seq, void *v)
struct dwc2_core_params *p = &hsotg->params;
int i;
- print_param(seq, p, otg_cap);
+ print_param(seq, p, otg_caps.hnp_support);
+ print_param(seq, p, otg_caps.srp_support);
+ print_param(seq, p, otg_caps.otg_rev);
print_param(seq, p, dma_desc_enable);
print_param(seq, p, dma_desc_fs_enable);
print_param(seq, p, speed);
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7cd95bc..8623ddd 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4967,6 +4967,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);
+ hsotg->gadget.otg_caps = &hsotg->params.otg_caps;
hsotg->remote_wakeup_allowed = 0;
if (hsotg->params.lpm)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a215ec9..13c779a 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -138,19 +138,15 @@ static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
switch (hsotg->hw_params.op_mode) {
case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
- if (hsotg->params.otg_cap ==
- DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
+ if (hsotg->params.otg_caps.hnp_support &&
+ hsotg->params.otg_caps.srp_support)
usbcfg |= GUSBCFG_HNPCAP;
- if (hsotg->params.otg_cap !=
- DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_SRPCAP;
- break;
+ fallthrough;
case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
- if (hsotg->params.otg_cap !=
- DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+ if (hsotg->params.otg_caps.srp_support)
usbcfg |= GUSBCFG_SRPCAP;
break;
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 59e1193..99d3b62 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -36,6 +36,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/usb/of.h>
#include "core.h"
@@ -53,7 +54,8 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->speed = DWC2_SPEED_PARAM_HIGH;
p->host_rx_fifo_size = 512;
p->host_nperio_tx_fifo_size = 512;
@@ -84,7 +86,8 @@ static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->host_rx_fifo_size = 525;
p->host_nperio_tx_fifo_size = 128;
p->host_perio_tx_fifo_size = 256;
@@ -97,7 +100,8 @@ static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = 2;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->host_rx_fifo_size = 288;
p->host_nperio_tx_fifo_size = 128;
p->host_perio_tx_fifo_size = 96;
@@ -111,7 +115,8 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->speed = DWC2_SPEED_PARAM_HIGH;
p->host_rx_fifo_size = 512;
p->host_nperio_tx_fifo_size = 500;
@@ -144,7 +149,8 @@ static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->speed = DWC2_SPEED_PARAM_FULL;
p->host_rx_fifo_size = 128;
p->host_nperio_tx_fifo_size = 96;
@@ -168,7 +174,8 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->speed = DWC2_SPEED_PARAM_FULL;
p->host_rx_fifo_size = 128;
p->host_nperio_tx_fifo_size = 96;
@@ -188,7 +195,8 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
p->host_rx_fifo_size = 440;
p->host_nperio_tx_fifo_size = 256;
@@ -241,23 +249,22 @@ MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
{
- u8 val;
-
switch (hsotg->hw_params.op_mode) {
case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
- val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE;
+ hsotg->params.otg_caps.hnp_support = true;
+ hsotg->params.otg_caps.srp_support = true;
break;
case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
- val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE;
+ hsotg->params.otg_caps.hnp_support = false;
+ hsotg->params.otg_caps.srp_support = true;
break;
default:
- val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ hsotg->params.otg_caps.hnp_support = false;
+ hsotg->params.otg_caps.srp_support = false;
break;
}
-
- hsotg->params.otg_cap = val;
}
static void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg)
@@ -463,6 +470,8 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
&p->g_tx_fifo_size[1],
num);
}
+
+ of_usb_update_otg_caps(hsotg->dev->of_node, &p->otg_caps);
}
if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL))
@@ -473,29 +482,27 @@ static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
{
int valid = 1;
- switch (hsotg->params.otg_cap) {
- case DWC2_CAP_PARAM_HNP_SRP_CAPABLE:
+ if (hsotg->params.otg_caps.hnp_support && hsotg->params.otg_caps.srp_support) {
+ /* check HNP && SRP capable */
if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE)
valid = 0;
- break;
- case DWC2_CAP_PARAM_SRP_ONLY_CAPABLE:
- switch (hsotg->hw_params.op_mode) {
- case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
- case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
- case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
- case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
- break;
- default:
- valid = 0;
- break;
+ } else if (!hsotg->params.otg_caps.hnp_support) {
+ /* check SRP only capable */
+ if (hsotg->params.otg_caps.srp_support) {
+ switch (hsotg->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ break;
+ default:
+ valid = 0;
+ break;
+ }
}
- break;
- case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE:
- /* always valid */
- break;
- default:
+ /* else: NO HNP && NO SRP capable: always valid */
+ } else {
valid = 0;
- break;
}
if (!valid)
--
2.7.4