This series will add eDP controller support for Qualcomm SC7280
platform. These patches are baseline changes with which we can enable
eDP display on sc7280. The sc7280 eDP controller driver can also support
additional features such as no_hpd detection, PSR, etc. which will be
enabled in subsequent patch series.
This is based on Bjorn's changes in the below mentioned series
to support both eDP and DP programming through the same driver:
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=564841
Sankeerth Billakanti (5):
dt-bindings: msm/dp: Add DP compatible strings for sc7280
drm/msm/dp: Add DP controllers for sc7280
drm/dp: Add macro to check max_downspread capability
drm/msm/dp: Enable downspread for supported DP sinks
drm/msm/dp: Enable ASSR for supported DP sinks
.../bindings/display/msm/dp-controller.yaml | 2 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 4 ++--
drivers/gpu/drm/msm/dp/dp_ctrl.c | 23 +++++++++++++++++++---
drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
include/drm/drm_dp_helper.h | 7 +++++++
5 files changed, 40 insertions(+), 5 deletions(-)
--
2.7.4
From: Sankeerth Billakanti <[email protected]>
The Qualcomm SC7280 platform supports one eDP controller
and a DP controller. This change will add the compatible
string for both eDP and DP to msm dp-controller binding.
Signed-off-by: Sankeerth Billakanti <[email protected]>
changes in v3:
- Modify the subject (Doug Anderson)
- Add sc7280-dp also to the list (Stephen Boyd)
changes in v2:
- Sort alphabetically (Stephen Boyd)
- Cleanup residual stale changes in the patch (Matthias Kaehlcke)
- Modify the subject (Doug Anderson)
Reviewed-by: Stephen Boyd <[email protected]>
---
Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 63e585f..5457612 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -17,6 +17,8 @@ properties:
compatible:
enum:
- qcom,sc7180-dp
+ - qcom,sc7280-dp
+ - qcom,sc7280-edp
- qcom,sc8180x-dp
- qcom,sc8180x-edp
--
2.7.4
The eDP controller on SC7280 is similar to the eDP/DP controllers
supported by the current driver implementation.
SC7280 supports one EDP and one DP controller which can operate
concurrently.
This change adds the support for eDP and DP controller on sc7280.
Signed-off-by: Sankeerth Billakanti <[email protected]>
changes in v3:
- Split into patches according to function (Dmitry Baryshkov)
- Use DP_CONTROLLER_1 for eDP controller intf (Dmitry Baryshkov)
- Use DP_CONTROLLER_0 for sc7280-dp (Dmitry Baryshkov)
- Add macro in drm_helper.h for checking ssc capability (Stephen Boyd)
- Use existing macro to check assr capability (Stephen Boyd)
- Add comment for HPD_INIT_SETUP delay (Stephen Boyd)
changes in v2:
- Don't initialize variables to 0 (Stephen Boyd)
- Use const for read-only dpcd (Stephen Boyd)
- Remove zero pixel clock check (Stephen Boyd)
- Sort compatible strings alphabetically (Stephen Boyd)
- Use pwm_bl.c for backlight instead of gpio (Stephen Boyd)
- Change return type for functions returning always 0 (Matthias Kaehlcke)
Reviewed-by: Stephen Boyd <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 4 ++--
drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index ce6f32a..2b4dc9d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = {
};
static const struct dpu_intf_cfg sc7280_intf[] = {
- INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+ INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
- INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
+ INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
};
/*************************************************************
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index aba8aa4..61385d6 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -135,8 +135,17 @@ static const struct msm_dp_config sc7180_dp_cfg = {
.num_descs = 1,
};
+static const struct msm_dp_config sc7280_dp_cfg = {
+ .descs = (const struct msm_dp_desc[]) {
+ [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP },
+ },
+ .num_descs = 2,
+};
+
static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
+ { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
{}
};
--
2.7.4
The sc7280 eDP sink that supports downspread will fail link training
if source does not enable SSC / downspread. This change will set the
downspread bit in the DP sink if supported and indicate SSC support
to the DP PHY driver.
Signed-off-by: Sankeerth Billakanti <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 62e75dc..a40e798 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1228,7 +1228,9 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
int *training_step)
{
int ret = 0;
+ const u8 *dpcd = ctrl->panel->dpcd;
u8 encoding = DP_SET_ANSI_8B10B;
+ u8 ssc;
struct dp_link_info link_info = {0};
dp_ctrl_config_ctrl(ctrl);
@@ -1238,6 +1240,12 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING;
dp_aux_link_configure(ctrl->aux, &link_info);
+
+ if (drm_dp_max_downspread(dpcd)) {
+ ssc = DP_SPREAD_AMP_0_5;
+ drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, 1);
+ }
+
drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
&encoding, 1);
@@ -1312,9 +1320,11 @@ static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
struct dp_io *dp_io = &ctrl->parser->io;
struct phy *phy = dp_io->phy;
struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp;
+ const u8 *dpcd = ctrl->panel->dpcd;
opts_dp->lanes = ctrl->link->link_params.num_lanes;
opts_dp->link_rate = ctrl->link->link_params.rate / 100;
+ opts_dp->ssc = drm_dp_max_downspread(dpcd);
dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link",
ctrl->link->link_params.rate * 1000);
@@ -1406,7 +1416,7 @@ void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
{
- u8 *dpcd = ctrl->panel->dpcd;
+ const u8 *dpcd = ctrl->panel->dpcd;
/*
* For better interop experience, used a fixed NVID=0x8000
--
2.7.4
The eDP sink on sc7280 supports ASSR and dp driver will
enable ASSR in the source hardware. The driver needs to
enable the ASSR field in the DPCD configuration register
to avoid screen corruption. This change will enable ASSR
if supported in the sink device.
Signed-off-by: Sankeerth Billakanti <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index a40e798..c724cb0 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -119,13 +119,13 @@ void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
{
u32 config = 0, tbd;
- u8 *dpcd = ctrl->panel->dpcd;
+ const u8 *dpcd = ctrl->panel->dpcd;
/* Default-> LSCLK DIV: 1/4 LCLK */
config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
/* Scrambler reset enable */
- if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
+ if (drm_dp_alternate_scrambler_reset_cap(dpcd))
config |= DP_CONFIGURATION_CTRL_ASSR;
tbd = dp_link_get_test_bits_depth(ctrl->link,
@@ -1231,6 +1231,7 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
const u8 *dpcd = ctrl->panel->dpcd;
u8 encoding = DP_SET_ANSI_8B10B;
u8 ssc;
+ u8 assr;
struct dp_link_info link_info = {0};
dp_ctrl_config_ctrl(ctrl);
@@ -1249,6 +1250,12 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
&encoding, 1);
+ if (drm_dp_alternate_scrambler_reset_cap(dpcd)) {
+ assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+ drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET,
+ &assr, 1);
+ }
+
ret = dp_ctrl_link_train_1(ctrl, training_step);
if (ret) {
DRM_ERROR("link training #1 failed. ret=%d\n", ret);
--
2.7.4