This patch series is to split lpass variant common pin control
functions and SoC specific functions and to add lpass sc7280 pincontrol support.
It also Adds dt-bindings for lpass sc7280 lpass lpi pincontrol.
Changes Since V3:
-- Update separate Kconfig fields for sm8250 and sc7280.
-- Update module license and description.
-- Move static variables to corresponding .c files from header file.
Changes Since V2:
-- Add new dt-bindings for sc7280 lpi driver.
-- Make clock voting change as separate patch.
-- Split existing pincontrol driver and make common functions
as part of separate file.
-- Rename lpass pincontrol lpi dt-bindings to sm8250 specific dt-bindings
Changes Since V1:
-- Make lpi pinctrl variant data structure as constant
-- Add appropriate commit message
-- Change signedoff by sequence.
Srinivasa Rao Mandadapu (5):
dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific
dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings
pinctrl: qcom: Move chip specific functions to right files
pinctrl: qcom: Update clock voting as optional
pinctrl: qcom: Add SC7280 lpass pin configuration
.../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 -----------
.../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 ++++++++++
.../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++
drivers/pinctrl/qcom/Kconfig | 16 ++
drivers/pinctrl/qcom/Makefile | 2 +
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 252 +--------------------
drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 98 ++++++++
drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 169 ++++++++++++++
drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 166 ++++++++++++++
9 files changed, 704 insertions(+), 374 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Change generic lpass lpi pincotrol bindings file to SoC specific file,
to distinguish and accomadate other SoC specific dt bindings.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
.../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 ---------------------
.../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++++++++++++
2 files changed, 130 insertions(+), 130 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
deleted file mode 100644
index e47ebf9..0000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
- Low Power Island (LPI) TLMM block
-
-maintainers:
- - Srinivas Kandagatla <[email protected]>
-
-description: |
- This binding describes the Top Level Mode Multiplexer block found in the
- LPASS LPI IP on most Qualcomm SoCs
-
-properties:
- compatible:
- const: qcom,sm8250-lpass-lpi-pinctrl
-
- reg:
- minItems: 2
- maxItems: 2
-
- clocks:
- items:
- - description: LPASS Core voting clock
- - description: LPASS Audio voting clock
-
- clock-names:
- items:
- - const: core
- - const: audio
-
- gpio-controller: true
-
- '#gpio-cells':
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
-#PIN CONFIGURATION NODES
-patternProperties:
- '-pins$':
- type: object
- description:
- Pinctrl node's client devices use subnodes for desired pin configuration.
- Client device subnodes use below standard properties.
- $ref: "/schemas/pinctrl/pincfg-node.yaml"
-
- properties:
- pins:
- description:
- List of gpio pins affected by the properties specified in this
- subnode.
- items:
- oneOf:
- - pattern: "^gpio([0-9]|[1-9][0-9])$"
- minItems: 1
- maxItems: 14
-
- function:
- enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
- qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
- dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
- i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
- dmic3_data, i2s2_data ]
- description:
- Specify the alternative function to be configured for the specified
- pins.
-
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-pull-down: true
-
- bias-pull-up: true
-
- bias-disable: true
-
- output-high: true
-
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - gpio-controller
- - '#gpio-cells'
- - gpio-ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/sound/qcom,q6afe.h>
- lpi_tlmm: pinctrl@33c0000 {
- compatible = "qcom,sm8250-lpass-lpi-pinctrl";
- reg = <0x33c0000 0x20000>,
- <0x3550000 0x10000>;
- clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- clock-names = "core", "audio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&lpi_tlmm 0 0 14>;
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000..e47ebf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+ Low Power Island (LPI) TLMM block
+
+maintainers:
+ - Srinivas Kandagatla <[email protected]>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+ compatible:
+ const: qcom,sm8250-lpass-lpi-pinctrl
+
+ reg:
+ minItems: 2
+ maxItems: 2
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9])$"
+ minItems: 1
+ maxItems: 14
+
+ function:
+ enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+ qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+ dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+ i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+ dmic3_data, i2s2_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ lpi_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+ reg = <0x33c0000 0x20000>,
+ <0x3550000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 14>;
+ };
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
From: Srinivasa Rao Mandadapu <[email protected]>
Add device tree binding Documentation details for Qualcomm SC7280
LPASS LPI pinctrl driver.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
.../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 +++++++++++++++++++++
1 file changed, 115 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000..62babb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+ Low Power Island (LPI) TLMM block
+
+maintainers:
+ - Srinivasa Rao Mandadapu <[email protected]>
+ - Srinivas Kandagatla <[email protected]>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+ compatible:
+ const: qcom,sc7280-lpass-lpi-pinctrl
+
+ reg:
+ minItems: 2
+ maxItems: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9])$"
+ minItems: 1
+ maxItems: 15
+
+ function:
+ enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+ qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+ dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+ i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+ dmic3_data, i2s2_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ lpass_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+ reg = <0x33c0000 0x20000>,
+ <0x3550000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 15>;
+ };
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
From: Srinivasa Rao Mandadapu <[email protected]>
Update lpass lpi pin control driver to accommodate new lpass variant
SoC specific drivers.
Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file
and common declarations to pinctrl-lpass-lpi.h header file.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
drivers/pinctrl/qcom/Kconfig | 8 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 250 +-----------------------
drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 98 ++++++++++
drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 166 ++++++++++++++++
5 files changed, 280 insertions(+), 243 deletions(-)
create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 5ff4207..e750e10 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -320,4 +320,12 @@ config PINCTRL_LPASS_LPI
Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
(Low Power Island) found on the Qualcomm Technologies Inc SoCs.
+config PINCTRL_SM8250_LPASS_LPI
+ tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
+ depends on PINCTRL_LPASS_LPI
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
+ (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
+
endif
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 7a12e8c..8bc877e 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
+obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 2f19ab4..bcc12f6 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -4,237 +4,16 @@
* Copyright (c) 2020 Linaro Ltd.
*/
-#include <linux/bitops.h>
-#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/gpio/driver.h>
-#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
-#include <linux/of.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
#include "../core.h"
#include "../pinctrl-utils.h"
-
-#define LPI_SLEW_RATE_CTL_REG 0xa000
-#define LPI_TLMM_REG_OFFSET 0x1000
-#define LPI_SLEW_RATE_MAX 0x03
-#define LPI_SLEW_BITS_SIZE 0x02
-#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
-#define LPI_GPIO_CFG_REG 0x00
-#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
-#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
-#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
-#define LPI_GPIO_OE_MASK BIT(9)
-#define LPI_GPIO_VALUE_REG 0x04
-#define LPI_GPIO_VALUE_IN_MASK BIT(0)
-#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
-
-#define LPI_GPIO_BIAS_DISABLE 0x0
-#define LPI_GPIO_PULL_DOWN 0x1
-#define LPI_GPIO_KEEPER 0x2
-#define LPI_GPIO_PULL_UP 0x3
-#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
-#define NO_SLEW -1
-
-#define LPI_FUNCTION(fname) \
- [LPI_MUX_##fname] = { \
- .name = #fname, \
- .groups = fname##_groups, \
- .ngroups = ARRAY_SIZE(fname##_groups), \
- }
-
-#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
- { \
- .name = "gpio" #id, \
- .pins = gpio##id##_pins, \
- .pin = id, \
- .slew_offset = soff, \
- .npins = ARRAY_SIZE(gpio##id##_pins), \
- .funcs = (int[]){ \
- LPI_MUX_gpio, \
- LPI_MUX_##f1, \
- LPI_MUX_##f2, \
- LPI_MUX_##f3, \
- LPI_MUX_##f4, \
- }, \
- .nfuncs = 5, \
- }
-
-struct lpi_pingroup {
- const char *name;
- const unsigned int *pins;
- unsigned int npins;
- unsigned int pin;
- /* Bit offset in slew register for SoundWire pins only */
- int slew_offset;
- unsigned int *funcs;
- unsigned int nfuncs;
-};
-
-struct lpi_function {
- const char *name;
- const char * const *groups;
- unsigned int ngroups;
-};
-
-struct lpi_pinctrl_variant_data {
- const struct pinctrl_pin_desc *pins;
- int npins;
- const struct lpi_pingroup *groups;
- int ngroups;
- const struct lpi_function *functions;
- int nfunctions;
-};
-
-#define MAX_LPI_NUM_CLKS 2
-
-struct lpi_pinctrl {
- struct device *dev;
- struct pinctrl_dev *ctrl;
- struct gpio_chip chip;
- struct pinctrl_desc desc;
- char __iomem *tlmm_base;
- char __iomem *slew_base;
- struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
- struct mutex slew_access_lock;
- const struct lpi_pinctrl_variant_data *data;
-};
-
-/* sm8250 variant specific data */
-static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
- PINCTRL_PIN(0, "gpio0"),
- PINCTRL_PIN(1, "gpio1"),
- PINCTRL_PIN(2, "gpio2"),
- PINCTRL_PIN(3, "gpio3"),
- PINCTRL_PIN(4, "gpio4"),
- PINCTRL_PIN(5, "gpio5"),
- PINCTRL_PIN(6, "gpio6"),
- PINCTRL_PIN(7, "gpio7"),
- PINCTRL_PIN(8, "gpio8"),
- PINCTRL_PIN(9, "gpio9"),
- PINCTRL_PIN(10, "gpio10"),
- PINCTRL_PIN(11, "gpio11"),
- PINCTRL_PIN(12, "gpio12"),
- PINCTRL_PIN(13, "gpio13"),
-};
-
-enum sm8250_lpi_functions {
- LPI_MUX_dmic1_clk,
- LPI_MUX_dmic1_data,
- LPI_MUX_dmic2_clk,
- LPI_MUX_dmic2_data,
- LPI_MUX_dmic3_clk,
- LPI_MUX_dmic3_data,
- LPI_MUX_i2s1_clk,
- LPI_MUX_i2s1_data,
- LPI_MUX_i2s1_ws,
- LPI_MUX_i2s2_clk,
- LPI_MUX_i2s2_data,
- LPI_MUX_i2s2_ws,
- LPI_MUX_qua_mi2s_data,
- LPI_MUX_qua_mi2s_sclk,
- LPI_MUX_qua_mi2s_ws,
- LPI_MUX_swr_rx_clk,
- LPI_MUX_swr_rx_data,
- LPI_MUX_swr_tx_clk,
- LPI_MUX_swr_tx_data,
- LPI_MUX_wsa_swr_clk,
- LPI_MUX_wsa_swr_data,
- LPI_MUX_gpio,
- LPI_MUX__,
-};
-
-static const unsigned int gpio0_pins[] = { 0 };
-static const unsigned int gpio1_pins[] = { 1 };
-static const unsigned int gpio2_pins[] = { 2 };
-static const unsigned int gpio3_pins[] = { 3 };
-static const unsigned int gpio4_pins[] = { 4 };
-static const unsigned int gpio5_pins[] = { 5 };
-static const unsigned int gpio6_pins[] = { 6 };
-static const unsigned int gpio7_pins[] = { 7 };
-static const unsigned int gpio8_pins[] = { 8 };
-static const unsigned int gpio9_pins[] = { 9 };
-static const unsigned int gpio10_pins[] = { 10 };
-static const unsigned int gpio11_pins[] = { 11 };
-static const unsigned int gpio12_pins[] = { 12 };
-static const unsigned int gpio13_pins[] = { 13 };
-static const char * const swr_tx_clk_groups[] = { "gpio0" };
-static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
-static const char * const swr_rx_clk_groups[] = { "gpio3" };
-static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
-static const char * const dmic1_clk_groups[] = { "gpio6" };
-static const char * const dmic1_data_groups[] = { "gpio7" };
-static const char * const dmic2_clk_groups[] = { "gpio8" };
-static const char * const dmic2_data_groups[] = { "gpio9" };
-static const char * const i2s2_clk_groups[] = { "gpio10" };
-static const char * const i2s2_ws_groups[] = { "gpio11" };
-static const char * const dmic3_clk_groups[] = { "gpio12" };
-static const char * const dmic3_data_groups[] = { "gpio13" };
-static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
-static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
-static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
-static const char * const i2s1_clk_groups[] = { "gpio6" };
-static const char * const i2s1_ws_groups[] = { "gpio7" };
-static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
-static const char * const wsa_swr_clk_groups[] = { "gpio10" };
-static const char * const wsa_swr_data_groups[] = { "gpio11" };
-static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
-
-static const struct lpi_pingroup sm8250_groups[] = {
- LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
- LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
- LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
- LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
- LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
- LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
- LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
- LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
- LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
- LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
- LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
- LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
- LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
- LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
-};
-
-static const struct lpi_function sm8250_functions[] = {
- LPI_FUNCTION(dmic1_clk),
- LPI_FUNCTION(dmic1_data),
- LPI_FUNCTION(dmic2_clk),
- LPI_FUNCTION(dmic2_data),
- LPI_FUNCTION(dmic3_clk),
- LPI_FUNCTION(dmic3_data),
- LPI_FUNCTION(i2s1_clk),
- LPI_FUNCTION(i2s1_data),
- LPI_FUNCTION(i2s1_ws),
- LPI_FUNCTION(i2s2_clk),
- LPI_FUNCTION(i2s2_data),
- LPI_FUNCTION(i2s2_ws),
- LPI_FUNCTION(qua_mi2s_data),
- LPI_FUNCTION(qua_mi2s_sclk),
- LPI_FUNCTION(qua_mi2s_ws),
- LPI_FUNCTION(swr_rx_clk),
- LPI_FUNCTION(swr_rx_data),
- LPI_FUNCTION(swr_tx_clk),
- LPI_FUNCTION(swr_tx_data),
- LPI_FUNCTION(wsa_swr_clk),
- LPI_FUNCTION(wsa_swr_data),
-};
-
-static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
- .pins = sm8250_lpi_pins,
- .npins = ARRAY_SIZE(sm8250_lpi_pins),
- .groups = sm8250_groups,
- .ngroups = ARRAY_SIZE(sm8250_groups),
- .functions = sm8250_functions,
- .nfunctions = ARRAY_SIZE(sm8250_functions),
-};
+#include "pinctrl-lpass-lpi.h"
static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
unsigned int addr)
@@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = {
.dbg_show = lpi_gpio_dbg_show,
};
-static int lpi_pinctrl_probe(struct platform_device *pdev)
+int lpi_pinctrl_probe(struct platform_device *pdev)
{
const struct lpi_pinctrl_variant_data *data;
struct device *dev = &pdev->dev;
@@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
return ret;
}
+EXPORT_SYMBOL(lpi_pinctrl_probe);
-static int lpi_pinctrl_remove(struct platform_device *pdev)
+
+int lpi_pinctrl_remove(struct platform_device *pdev)
{
struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
@@ -671,25 +452,8 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
return 0;
}
+EXPORT_SYMBOL(lpi_pinctrl_remove);
-static const struct of_device_id lpi_pinctrl_of_match[] = {
- {
- .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
- .data = &sm8250_lpi_data,
- },
- { }
-};
-MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
-
-static struct platform_driver lpi_pinctrl_driver = {
- .driver = {
- .name = "qcom-lpass-lpi-pinctrl",
- .of_match_table = lpi_pinctrl_of_match,
- },
- .probe = lpi_pinctrl_probe,
- .remove = lpi_pinctrl_remove,
-};
-
-module_platform_driver(lpi_pinctrl_driver);
MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
MODULE_LICENSE("GPL");
+
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
new file mode 100644
index 0000000..ad84565
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020 Linaro Ltd.
+ */
+#ifndef __PINCTRL_LPASS_LPI_H__
+#define __PINCTRL_LPASS_LPI_H__
+
+#define LPI_SLEW_RATE_CTL_REG 0xa000
+#define LPI_TLMM_REG_OFFSET 0x1000
+#define LPI_SLEW_RATE_MAX 0x03
+#define LPI_SLEW_BITS_SIZE 0x02
+#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
+#define LPI_GPIO_CFG_REG 0x00
+#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
+#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
+#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
+#define LPI_GPIO_OE_MASK BIT(9)
+#define LPI_GPIO_VALUE_REG 0x04
+#define LPI_GPIO_VALUE_IN_MASK BIT(0)
+#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
+
+#define LPI_GPIO_BIAS_DISABLE 0x0
+#define LPI_GPIO_PULL_DOWN 0x1
+#define LPI_GPIO_KEEPER 0x2
+#define LPI_GPIO_PULL_UP 0x3
+#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
+#define NO_SLEW -1
+
+#define LPI_FUNCTION(fname) \
+ [LPI_MUX_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .pin = id, \
+ .slew_offset = soff, \
+ .npins = ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ LPI_MUX_gpio, \
+ LPI_MUX_##f1, \
+ LPI_MUX_##f2, \
+ LPI_MUX_##f3, \
+ LPI_MUX_##f4, \
+ }, \
+ .nfuncs = 5, \
+ }
+
+struct lpi_pingroup {
+ const char *name;
+ const unsigned int *pins;
+ unsigned int npins;
+ unsigned int pin;
+ /* Bit offset in slew register for SoundWire pins only */
+ int slew_offset;
+ unsigned int *funcs;
+ unsigned int nfuncs;
+};
+
+struct lpi_function {
+ const char *name;
+ const char * const *groups;
+ unsigned int ngroups;
+};
+
+struct lpi_pinctrl_variant_data {
+ const struct pinctrl_pin_desc *pins;
+ int npins;
+ const struct lpi_pingroup *groups;
+ int ngroups;
+ const struct lpi_function *functions;
+ int nfunctions;
+};
+
+#define MAX_LPI_NUM_CLKS 2
+
+struct lpi_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *ctrl;
+ struct gpio_chip chip;
+ struct pinctrl_desc desc;
+ char __iomem *tlmm_base;
+ char __iomem *slew_base;
+ struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
+ struct mutex slew_access_lock;
+ const struct lpi_pinctrl_variant_data *data;
+};
+
+int lpi_pinctrl_probe(struct platform_device *pdev);
+int lpi_pinctrl_remove(struct platform_device *pdev);
+
+#endif /*__PINCTRL_LPASS_LPI_H__*/
+
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
new file mode 100644
index 0000000..9a5db15
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020 Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lpass-lpi.h"
+
+enum lpass_lpi_functions {
+ LPI_MUX_dmic1_clk,
+ LPI_MUX_dmic1_data,
+ LPI_MUX_dmic2_clk,
+ LPI_MUX_dmic2_data,
+ LPI_MUX_dmic3_clk,
+ LPI_MUX_dmic3_data,
+ LPI_MUX_i2s1_clk,
+ LPI_MUX_i2s1_data,
+ LPI_MUX_i2s1_ws,
+ LPI_MUX_i2s2_clk,
+ LPI_MUX_i2s2_data,
+ LPI_MUX_i2s2_ws,
+ LPI_MUX_qua_mi2s_data,
+ LPI_MUX_qua_mi2s_sclk,
+ LPI_MUX_qua_mi2s_ws,
+ LPI_MUX_swr_rx_clk,
+ LPI_MUX_swr_rx_data,
+ LPI_MUX_swr_tx_clk,
+ LPI_MUX_swr_tx_data,
+ LPI_MUX_wsa_swr_clk,
+ LPI_MUX_wsa_swr_data,
+ LPI_MUX_gpio,
+ LPI_MUX__,
+};
+
+static const unsigned int gpio0_pins[] = { 0 };
+static const unsigned int gpio1_pins[] = { 1 };
+static const unsigned int gpio2_pins[] = { 2 };
+static const unsigned int gpio3_pins[] = { 3 };
+static const unsigned int gpio4_pins[] = { 4 };
+static const unsigned int gpio5_pins[] = { 5 };
+static const unsigned int gpio6_pins[] = { 6 };
+static const unsigned int gpio7_pins[] = { 7 };
+static const unsigned int gpio8_pins[] = { 8 };
+static const unsigned int gpio9_pins[] = { 9 };
+static const unsigned int gpio10_pins[] = { 10 };
+static const unsigned int gpio11_pins[] = { 11 };
+static const unsigned int gpio12_pins[] = { 12 };
+static const unsigned int gpio13_pins[] = { 13 };
+
+/* sm8250 variant specific data */
+static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+};
+
+static const char * const swr_tx_clk_groups[] = { "gpio0" };
+static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
+static const char * const swr_rx_clk_groups[] = { "gpio3" };
+static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
+static const char * const dmic1_clk_groups[] = { "gpio6" };
+static const char * const dmic1_data_groups[] = { "gpio7" };
+static const char * const dmic2_clk_groups[] = { "gpio8" };
+static const char * const dmic2_data_groups[] = { "gpio9" };
+static const char * const i2s2_clk_groups[] = { "gpio10" };
+static const char * const i2s2_ws_groups[] = { "gpio11" };
+static const char * const dmic3_clk_groups[] = { "gpio12" };
+static const char * const dmic3_data_groups[] = { "gpio13" };
+static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
+static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
+static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
+static const char * const i2s1_clk_groups[] = { "gpio6" };
+static const char * const i2s1_ws_groups[] = { "gpio7" };
+static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
+static const char * const wsa_swr_clk_groups[] = { "gpio10" };
+static const char * const wsa_swr_data_groups[] = { "gpio11" };
+static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
+
+static const struct lpi_pingroup sm8250_groups[] = {
+ LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
+ LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
+ LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
+ LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
+ LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
+ LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
+ LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
+ LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
+ LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
+ LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
+ LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
+ LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
+ LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
+ LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
+};
+
+static const struct lpi_function sm8250_functions[] = {
+ LPI_FUNCTION(dmic1_clk),
+ LPI_FUNCTION(dmic1_data),
+ LPI_FUNCTION(dmic2_clk),
+ LPI_FUNCTION(dmic2_data),
+ LPI_FUNCTION(dmic3_clk),
+ LPI_FUNCTION(dmic3_data),
+ LPI_FUNCTION(i2s1_clk),
+ LPI_FUNCTION(i2s1_data),
+ LPI_FUNCTION(i2s1_ws),
+ LPI_FUNCTION(i2s2_clk),
+ LPI_FUNCTION(i2s2_data),
+ LPI_FUNCTION(i2s2_ws),
+ LPI_FUNCTION(qua_mi2s_data),
+ LPI_FUNCTION(qua_mi2s_sclk),
+ LPI_FUNCTION(qua_mi2s_ws),
+ LPI_FUNCTION(swr_rx_clk),
+ LPI_FUNCTION(swr_rx_data),
+ LPI_FUNCTION(swr_tx_clk),
+ LPI_FUNCTION(swr_tx_data),
+ LPI_FUNCTION(wsa_swr_clk),
+ LPI_FUNCTION(wsa_swr_data),
+};
+
+static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
+ .pins = sm8250_lpi_pins,
+ .npins = ARRAY_SIZE(sm8250_lpi_pins),
+ .groups = sm8250_groups,
+ .ngroups = ARRAY_SIZE(sm8250_groups),
+ .functions = sm8250_functions,
+ .nfunctions = ARRAY_SIZE(sm8250_functions),
+};
+
+static const struct of_device_id lpi_pinctrl_of_match[] = {
+ {
+ .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
+ .data = &sm8250_lpi_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+
+static struct platform_driver lpi_pinctrl_driver = {
+ .driver = {
+ .name = "qcom-sm8250-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ },
+ .probe = lpi_pinctrl_probe,
+ .remove = lpi_pinctrl_remove,
+};
+
+module_platform_driver(lpi_pinctrl_driver);
+MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver");
+MODULE_LICENSE("GPL");
+
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
From: Srinivasa Rao Mandadapu <[email protected]>
Update bulk clock voting to optional voting as ADSP bypass platform doesn't
need macro and decodec clocks, these are maintained as power domains and
operated from lpass audio core cc.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index bcc12f6..c2a1110 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -394,7 +394,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
"Slew resource not provided\n");
- ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
+ ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
if (ret)
return dev_err_probe(dev, ret, "Can't get clocks\n");
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
From: Srinivasa Rao Mandadapu <[email protected]>
Add pin control support for SC7280 LPASS LPI.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
drivers/pinctrl/qcom/Kconfig | 8 ++
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 169 ++++++++++++++++++++++++
3 files changed, 178 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index e750e10..37fe868 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -328,4 +328,12 @@ config PINCTRL_SM8250_LPASS_LPI
Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
(Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
+config PINCTRL_SC7280_LPASS_LPI
+ tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
+ depends on PINCTRL_LPASS_LPI
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
+ (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
+
endif
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 8bc877e..6c3ddaf 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
+obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
new file mode 100644
index 0000000..94bec15
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ * ALSA SoC platform-machine driver for QTi LPASS
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lpass-lpi.h"
+
+enum lpass_lpi_functions {
+ LPI_MUX_dmic1_clk,
+ LPI_MUX_dmic1_data,
+ LPI_MUX_dmic2_clk,
+ LPI_MUX_dmic2_data,
+ LPI_MUX_dmic3_clk,
+ LPI_MUX_dmic3_data,
+ LPI_MUX_i2s1_clk,
+ LPI_MUX_i2s1_data,
+ LPI_MUX_i2s1_ws,
+ LPI_MUX_i2s2_clk,
+ LPI_MUX_i2s2_data,
+ LPI_MUX_i2s2_ws,
+ LPI_MUX_qua_mi2s_data,
+ LPI_MUX_qua_mi2s_sclk,
+ LPI_MUX_qua_mi2s_ws,
+ LPI_MUX_swr_rx_clk,
+ LPI_MUX_swr_rx_data,
+ LPI_MUX_swr_tx_clk,
+ LPI_MUX_swr_tx_data,
+ LPI_MUX_wsa_swr_clk,
+ LPI_MUX_wsa_swr_data,
+ LPI_MUX_gpio,
+ LPI_MUX__,
+};
+
+static const unsigned int gpio0_pins[] = { 0 };
+static const unsigned int gpio1_pins[] = { 1 };
+static const unsigned int gpio2_pins[] = { 2 };
+static const unsigned int gpio3_pins[] = { 3 };
+static const unsigned int gpio4_pins[] = { 4 };
+static const unsigned int gpio5_pins[] = { 5 };
+static const unsigned int gpio6_pins[] = { 6 };
+static const unsigned int gpio7_pins[] = { 7 };
+static const unsigned int gpio8_pins[] = { 8 };
+static const unsigned int gpio9_pins[] = { 9 };
+static const unsigned int gpio10_pins[] = { 10 };
+static const unsigned int gpio11_pins[] = { 11 };
+static const unsigned int gpio12_pins[] = { 12 };
+static const unsigned int gpio13_pins[] = { 13 };
+static const unsigned int gpio14_pins[] = { 14 };
+
+/* sc7280 variant specific data */
+static const struct pinctrl_pin_desc sc7280_lpi_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+};
+
+static const char * const swr_tx_clk_groups[] = { "gpio0" };
+static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" };
+static const char * const swr_rx_clk_groups[] = { "gpio3" };
+static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
+static const char * const dmic1_clk_groups[] = { "gpio6" };
+static const char * const dmic1_data_groups[] = { "gpio7" };
+static const char * const dmic2_clk_groups[] = { "gpio8" };
+static const char * const dmic2_data_groups[] = { "gpio9" };
+static const char * const i2s2_clk_groups[] = { "gpio10" };
+static const char * const i2s2_ws_groups[] = { "gpio11" };
+static const char * const dmic3_clk_groups[] = { "gpio12" };
+static const char * const dmic3_data_groups[] = { "gpio13" };
+static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
+static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
+static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
+static const char * const i2s1_clk_groups[] = { "gpio6" };
+static const char * const i2s1_ws_groups[] = { "gpio7" };
+static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
+static const char * const wsa_swr_clk_groups[] = { "gpio10" };
+static const char * const wsa_swr_data_groups[] = { "gpio11" };
+static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" };
+
+static const struct lpi_pingroup sc7280_groups[] = {
+ LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
+ LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
+ LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
+ LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
+ LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
+ LPI_PINGROUP(5, 12, swr_rx_data, _, _, _),
+ LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
+ LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
+ LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
+ LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
+ LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
+ LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
+ LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
+ LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
+ LPI_PINGROUP(14, 6, swr_tx_data, _, _, _),
+};
+
+static const struct lpi_function sc7280_functions[] = {
+ LPI_FUNCTION(dmic1_clk),
+ LPI_FUNCTION(dmic1_data),
+ LPI_FUNCTION(dmic2_clk),
+ LPI_FUNCTION(dmic2_data),
+ LPI_FUNCTION(dmic3_clk),
+ LPI_FUNCTION(dmic3_data),
+ LPI_FUNCTION(i2s1_clk),
+ LPI_FUNCTION(i2s1_data),
+ LPI_FUNCTION(i2s1_ws),
+ LPI_FUNCTION(i2s2_clk),
+ LPI_FUNCTION(i2s2_data),
+ LPI_FUNCTION(i2s2_ws),
+ LPI_FUNCTION(qua_mi2s_data),
+ LPI_FUNCTION(qua_mi2s_sclk),
+ LPI_FUNCTION(qua_mi2s_ws),
+ LPI_FUNCTION(swr_rx_clk),
+ LPI_FUNCTION(swr_rx_data),
+ LPI_FUNCTION(swr_tx_clk),
+ LPI_FUNCTION(swr_tx_data),
+ LPI_FUNCTION(wsa_swr_clk),
+ LPI_FUNCTION(wsa_swr_data),
+};
+
+static const struct lpi_pinctrl_variant_data sc7280_lpi_data = {
+ .pins = sc7280_lpi_pins,
+ .npins = ARRAY_SIZE(sc7280_lpi_pins),
+ .groups = sc7280_groups,
+ .ngroups = ARRAY_SIZE(sc7280_groups),
+ .functions = sc7280_functions,
+ .nfunctions = ARRAY_SIZE(sc7280_functions),
+};
+
+static const struct of_device_id lpi_pinctrl_of_match[] = {
+ {
+ .compatible = "qcom,sc7280-lpass-lpi-pinctrl",
+ .data = &sc7280_lpi_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+
+static struct platform_driver lpi_pinctrl_driver = {
+ .driver = {
+ .name = "qcom-sc7280-lpass-lpi-pinctrl",
+ .of_match_table = lpi_pinctrl_of_match,
+ },
+ .probe = lpi_pinctrl_probe,
+ .remove = lpi_pinctrl_remove,
+};
+
+module_platform_driver(lpi_pinctrl_driver);
+MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver");
+MODULE_LICENSE("GPL");
+
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
On Fri, 03 Dec 2021 17:02:17 +0530, Srinivasa Rao Mandadapu wrote:
> From: Srinivasa Rao Mandadapu <[email protected]>
>
> Add device tree binding Documentation details for Qualcomm SC7280
> LPASS LPI pinctrl driver.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 +++++++++++++++++++++
> 1 file changed, 115 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml: duplicate '$id' value 'http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#'
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1563187
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On Fri, 03 Dec 2021 17:02:16 +0530, Srinivasa Rao Mandadapu wrote:
> Change generic lpass lpi pincotrol bindings file to SoC specific file,
> to distinguish and accomadate other SoC specific dt bindings.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 ---------------------
> .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++++++++++++
> 2 files changed, 130 insertions(+), 130 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1563181
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On Fri 03 Dec 03:32 PST 2021, Srinivasa Rao Mandadapu wrote:
> From: Srinivasa Rao Mandadapu <[email protected]>
>
> Update bulk clock voting to optional voting as ADSP bypass platform doesn't
> need macro and decodec clocks, these are maintained as power domains and
> operated from lpass audio core cc.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> index bcc12f6..c2a1110 100644
> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> @@ -394,7 +394,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
> return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
> "Slew resource not provided\n");
>
> - ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
> + ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
If some platforms requires this clock and others doesn't have one, then
please make this statement conditional on the compatible, rather than
making it optional on both.
Thanks,
Bjorn
> if (ret)
> return dev_err_probe(dev, ret, "Can't get clocks\n");
>
> --
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>
On Fri 03 Dec 05:32 CST 2021, Srinivasa Rao Mandadapu wrote:
> From: Srinivasa Rao Mandadapu <[email protected]>
>
> Add pin control support for SC7280 LPASS LPI.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> drivers/pinctrl/qcom/Kconfig | 8 ++
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 169 ++++++++++++++++++++++++
> 3 files changed, 178 insertions(+)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
>
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index e750e10..37fe868 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -328,4 +328,12 @@ config PINCTRL_SM8250_LPASS_LPI
> Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
>
> +config PINCTRL_SC7280_LPASS_LPI
> + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
You misspelled SC7280 here.
> + depends on PINCTRL_LPASS_LPI
> + help
> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> + (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
> +
> endif
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 8bc877e..6c3ddaf 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -38,3 +38,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
> obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
> +obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o
Please keep these entries sorted alphabetically, same with Kconfig.
Regards,
Bjorn
> diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
> new file mode 100644
> index 0000000..94bec15
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
> + * ALSA SoC platform-machine driver for QTi LPASS
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-lpass-lpi.h"
> +
> +enum lpass_lpi_functions {
> + LPI_MUX_dmic1_clk,
> + LPI_MUX_dmic1_data,
> + LPI_MUX_dmic2_clk,
> + LPI_MUX_dmic2_data,
> + LPI_MUX_dmic3_clk,
> + LPI_MUX_dmic3_data,
> + LPI_MUX_i2s1_clk,
> + LPI_MUX_i2s1_data,
> + LPI_MUX_i2s1_ws,
> + LPI_MUX_i2s2_clk,
> + LPI_MUX_i2s2_data,
> + LPI_MUX_i2s2_ws,
> + LPI_MUX_qua_mi2s_data,
> + LPI_MUX_qua_mi2s_sclk,
> + LPI_MUX_qua_mi2s_ws,
> + LPI_MUX_swr_rx_clk,
> + LPI_MUX_swr_rx_data,
> + LPI_MUX_swr_tx_clk,
> + LPI_MUX_swr_tx_data,
> + LPI_MUX_wsa_swr_clk,
> + LPI_MUX_wsa_swr_data,
> + LPI_MUX_gpio,
> + LPI_MUX__,
> +};
> +
> +static const unsigned int gpio0_pins[] = { 0 };
> +static const unsigned int gpio1_pins[] = { 1 };
> +static const unsigned int gpio2_pins[] = { 2 };
> +static const unsigned int gpio3_pins[] = { 3 };
> +static const unsigned int gpio4_pins[] = { 4 };
> +static const unsigned int gpio5_pins[] = { 5 };
> +static const unsigned int gpio6_pins[] = { 6 };
> +static const unsigned int gpio7_pins[] = { 7 };
> +static const unsigned int gpio8_pins[] = { 8 };
> +static const unsigned int gpio9_pins[] = { 9 };
> +static const unsigned int gpio10_pins[] = { 10 };
> +static const unsigned int gpio11_pins[] = { 11 };
> +static const unsigned int gpio12_pins[] = { 12 };
> +static const unsigned int gpio13_pins[] = { 13 };
> +static const unsigned int gpio14_pins[] = { 14 };
> +
> +/* sc7280 variant specific data */
> +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = {
> + PINCTRL_PIN(0, "gpio0"),
> + PINCTRL_PIN(1, "gpio1"),
> + PINCTRL_PIN(2, "gpio2"),
> + PINCTRL_PIN(3, "gpio3"),
> + PINCTRL_PIN(4, "gpio4"),
> + PINCTRL_PIN(5, "gpio5"),
> + PINCTRL_PIN(6, "gpio6"),
> + PINCTRL_PIN(7, "gpio7"),
> + PINCTRL_PIN(8, "gpio8"),
> + PINCTRL_PIN(9, "gpio9"),
> + PINCTRL_PIN(10, "gpio10"),
> + PINCTRL_PIN(11, "gpio11"),
> + PINCTRL_PIN(12, "gpio12"),
> + PINCTRL_PIN(13, "gpio13"),
> + PINCTRL_PIN(14, "gpio14"),
> +};
> +
> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" };
> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> +static const char * const dmic1_clk_groups[] = { "gpio6" };
> +static const char * const dmic1_data_groups[] = { "gpio7" };
> +static const char * const dmic2_clk_groups[] = { "gpio8" };
> +static const char * const dmic2_data_groups[] = { "gpio9" };
> +static const char * const i2s2_clk_groups[] = { "gpio10" };
> +static const char * const i2s2_ws_groups[] = { "gpio11" };
> +static const char * const dmic3_clk_groups[] = { "gpio12" };
> +static const char * const dmic3_data_groups[] = { "gpio13" };
> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> +static const char * const i2s1_clk_groups[] = { "gpio6" };
> +static const char * const i2s1_ws_groups[] = { "gpio7" };
> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" };
> +
> +static const struct lpi_pingroup sc7280_groups[] = {
> + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(5, 12, swr_rx_data, _, _, _),
> + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
> + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
> + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
> + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
> + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
> + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
> + LPI_PINGROUP(14, 6, swr_tx_data, _, _, _),
> +};
> +
> +static const struct lpi_function sc7280_functions[] = {
> + LPI_FUNCTION(dmic1_clk),
> + LPI_FUNCTION(dmic1_data),
> + LPI_FUNCTION(dmic2_clk),
> + LPI_FUNCTION(dmic2_data),
> + LPI_FUNCTION(dmic3_clk),
> + LPI_FUNCTION(dmic3_data),
> + LPI_FUNCTION(i2s1_clk),
> + LPI_FUNCTION(i2s1_data),
> + LPI_FUNCTION(i2s1_ws),
> + LPI_FUNCTION(i2s2_clk),
> + LPI_FUNCTION(i2s2_data),
> + LPI_FUNCTION(i2s2_ws),
> + LPI_FUNCTION(qua_mi2s_data),
> + LPI_FUNCTION(qua_mi2s_sclk),
> + LPI_FUNCTION(qua_mi2s_ws),
> + LPI_FUNCTION(swr_rx_clk),
> + LPI_FUNCTION(swr_rx_data),
> + LPI_FUNCTION(swr_tx_clk),
> + LPI_FUNCTION(swr_tx_data),
> + LPI_FUNCTION(wsa_swr_clk),
> + LPI_FUNCTION(wsa_swr_data),
> +};
> +
> +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = {
> + .pins = sc7280_lpi_pins,
> + .npins = ARRAY_SIZE(sc7280_lpi_pins),
> + .groups = sc7280_groups,
> + .ngroups = ARRAY_SIZE(sc7280_groups),
> + .functions = sc7280_functions,
> + .nfunctions = ARRAY_SIZE(sc7280_functions),
> +};
> +
> +static const struct of_device_id lpi_pinctrl_of_match[] = {
> + {
> + .compatible = "qcom,sc7280-lpass-lpi-pinctrl",
> + .data = &sc7280_lpi_data,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> +
> +static struct platform_driver lpi_pinctrl_driver = {
> + .driver = {
> + .name = "qcom-sc7280-lpass-lpi-pinctrl",
> + .of_match_table = lpi_pinctrl_of_match,
> + },
> + .probe = lpi_pinctrl_probe,
> + .remove = lpi_pinctrl_remove,
> +};
> +
> +module_platform_driver(lpi_pinctrl_driver);
> +MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver");
> +MODULE_LICENSE("GPL");
> +
> --
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>
On Fri 03 Dec 05:32 CST 2021, Srinivasa Rao Mandadapu wrote:
I don't see anything _wrong_ with the current filename, so this patch
isn't really moving chip function to the _right_ files.
May I suggest that you make $subject:
"pinctrl: qcom: Extract chip specific LPASS LPI code"
> From: Srinivasa Rao Mandadapu <[email protected]>
>
> Update lpass lpi pin control driver to accommodate new lpass variant
> SoC specific drivers.
I also have a hard time parsing this sentence.
> Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file
> and common declarations to pinctrl-lpass-lpi.h header file.
How about simply:
Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver
to allow reusing the common code in the addition of subsequent
platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> drivers/pinctrl/qcom/Kconfig | 8 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 250 +-----------------------
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 98 ++++++++++
> drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 166 ++++++++++++++++
> 5 files changed, 280 insertions(+), 243 deletions(-)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 5ff4207..e750e10 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -320,4 +320,12 @@ config PINCTRL_LPASS_LPI
> Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> (Low Power Island) found on the Qualcomm Technologies Inc SoCs.
>
> +config PINCTRL_SM8250_LPASS_LPI
> + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
> + depends on PINCTRL_LPASS_LPI
> + help
> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> + (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
> +
> endif
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 7a12e8c..8bc877e 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
> obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
> +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> index 2f19ab4..bcc12f6 100644
> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> @@ -4,237 +4,16 @@
> * Copyright (c) 2020 Linaro Ltd.
> */
>
> -#include <linux/bitops.h>
> -#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/gpio/driver.h>
> -#include <linux/io.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> -#include <linux/of.h>
> #include <linux/pinctrl/pinconf-generic.h>
> #include <linux/pinctrl/pinconf.h>
> #include <linux/pinctrl/pinmux.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/types.h>
> #include "../core.h"
> #include "../pinctrl-utils.h"
> -
> -#define LPI_SLEW_RATE_CTL_REG 0xa000
> -#define LPI_TLMM_REG_OFFSET 0x1000
> -#define LPI_SLEW_RATE_MAX 0x03
> -#define LPI_SLEW_BITS_SIZE 0x02
> -#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
> -#define LPI_GPIO_CFG_REG 0x00
> -#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
> -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
> -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
> -#define LPI_GPIO_OE_MASK BIT(9)
> -#define LPI_GPIO_VALUE_REG 0x04
> -#define LPI_GPIO_VALUE_IN_MASK BIT(0)
> -#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
> -
> -#define LPI_GPIO_BIAS_DISABLE 0x0
> -#define LPI_GPIO_PULL_DOWN 0x1
> -#define LPI_GPIO_KEEPER 0x2
> -#define LPI_GPIO_PULL_UP 0x3
> -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
> -#define NO_SLEW -1
> -
> -#define LPI_FUNCTION(fname) \
> - [LPI_MUX_##fname] = { \
> - .name = #fname, \
> - .groups = fname##_groups, \
> - .ngroups = ARRAY_SIZE(fname##_groups), \
> - }
> -
> -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
> - { \
> - .name = "gpio" #id, \
> - .pins = gpio##id##_pins, \
> - .pin = id, \
> - .slew_offset = soff, \
> - .npins = ARRAY_SIZE(gpio##id##_pins), \
> - .funcs = (int[]){ \
> - LPI_MUX_gpio, \
> - LPI_MUX_##f1, \
> - LPI_MUX_##f2, \
> - LPI_MUX_##f3, \
> - LPI_MUX_##f4, \
> - }, \
> - .nfuncs = 5, \
> - }
> -
> -struct lpi_pingroup {
> - const char *name;
> - const unsigned int *pins;
> - unsigned int npins;
> - unsigned int pin;
> - /* Bit offset in slew register for SoundWire pins only */
> - int slew_offset;
> - unsigned int *funcs;
> - unsigned int nfuncs;
> -};
> -
> -struct lpi_function {
> - const char *name;
> - const char * const *groups;
> - unsigned int ngroups;
> -};
> -
> -struct lpi_pinctrl_variant_data {
> - const struct pinctrl_pin_desc *pins;
> - int npins;
> - const struct lpi_pingroup *groups;
> - int ngroups;
> - const struct lpi_function *functions;
> - int nfunctions;
> -};
> -
> -#define MAX_LPI_NUM_CLKS 2
> -
> -struct lpi_pinctrl {
> - struct device *dev;
> - struct pinctrl_dev *ctrl;
> - struct gpio_chip chip;
> - struct pinctrl_desc desc;
> - char __iomem *tlmm_base;
> - char __iomem *slew_base;
> - struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
> - struct mutex slew_access_lock;
> - const struct lpi_pinctrl_variant_data *data;
> -};
> -
> -/* sm8250 variant specific data */
> -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
> - PINCTRL_PIN(0, "gpio0"),
> - PINCTRL_PIN(1, "gpio1"),
> - PINCTRL_PIN(2, "gpio2"),
> - PINCTRL_PIN(3, "gpio3"),
> - PINCTRL_PIN(4, "gpio4"),
> - PINCTRL_PIN(5, "gpio5"),
> - PINCTRL_PIN(6, "gpio6"),
> - PINCTRL_PIN(7, "gpio7"),
> - PINCTRL_PIN(8, "gpio8"),
> - PINCTRL_PIN(9, "gpio9"),
> - PINCTRL_PIN(10, "gpio10"),
> - PINCTRL_PIN(11, "gpio11"),
> - PINCTRL_PIN(12, "gpio12"),
> - PINCTRL_PIN(13, "gpio13"),
> -};
> -
> -enum sm8250_lpi_functions {
> - LPI_MUX_dmic1_clk,
> - LPI_MUX_dmic1_data,
> - LPI_MUX_dmic2_clk,
> - LPI_MUX_dmic2_data,
> - LPI_MUX_dmic3_clk,
> - LPI_MUX_dmic3_data,
> - LPI_MUX_i2s1_clk,
> - LPI_MUX_i2s1_data,
> - LPI_MUX_i2s1_ws,
> - LPI_MUX_i2s2_clk,
> - LPI_MUX_i2s2_data,
> - LPI_MUX_i2s2_ws,
> - LPI_MUX_qua_mi2s_data,
> - LPI_MUX_qua_mi2s_sclk,
> - LPI_MUX_qua_mi2s_ws,
> - LPI_MUX_swr_rx_clk,
> - LPI_MUX_swr_rx_data,
> - LPI_MUX_swr_tx_clk,
> - LPI_MUX_swr_tx_data,
> - LPI_MUX_wsa_swr_clk,
> - LPI_MUX_wsa_swr_data,
> - LPI_MUX_gpio,
> - LPI_MUX__,
> -};
> -
> -static const unsigned int gpio0_pins[] = { 0 };
> -static const unsigned int gpio1_pins[] = { 1 };
> -static const unsigned int gpio2_pins[] = { 2 };
> -static const unsigned int gpio3_pins[] = { 3 };
> -static const unsigned int gpio4_pins[] = { 4 };
> -static const unsigned int gpio5_pins[] = { 5 };
> -static const unsigned int gpio6_pins[] = { 6 };
> -static const unsigned int gpio7_pins[] = { 7 };
> -static const unsigned int gpio8_pins[] = { 8 };
> -static const unsigned int gpio9_pins[] = { 9 };
> -static const unsigned int gpio10_pins[] = { 10 };
> -static const unsigned int gpio11_pins[] = { 11 };
> -static const unsigned int gpio12_pins[] = { 12 };
> -static const unsigned int gpio13_pins[] = { 13 };
> -static const char * const swr_tx_clk_groups[] = { "gpio0" };
> -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
> -static const char * const swr_rx_clk_groups[] = { "gpio3" };
> -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> -static const char * const dmic1_clk_groups[] = { "gpio6" };
> -static const char * const dmic1_data_groups[] = { "gpio7" };
> -static const char * const dmic2_clk_groups[] = { "gpio8" };
> -static const char * const dmic2_data_groups[] = { "gpio9" };
> -static const char * const i2s2_clk_groups[] = { "gpio10" };
> -static const char * const i2s2_ws_groups[] = { "gpio11" };
> -static const char * const dmic3_clk_groups[] = { "gpio12" };
> -static const char * const dmic3_data_groups[] = { "gpio13" };
> -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> -static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> -static const char * const i2s1_clk_groups[] = { "gpio6" };
> -static const char * const i2s1_ws_groups[] = { "gpio7" };
> -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> -static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> -static const char * const wsa_swr_data_groups[] = { "gpio11" };
> -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
> -
> -static const struct lpi_pingroup sm8250_groups[] = {
> - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
> - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
> - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
> - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
> - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
> - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
> - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
> -};
> -
> -static const struct lpi_function sm8250_functions[] = {
> - LPI_FUNCTION(dmic1_clk),
> - LPI_FUNCTION(dmic1_data),
> - LPI_FUNCTION(dmic2_clk),
> - LPI_FUNCTION(dmic2_data),
> - LPI_FUNCTION(dmic3_clk),
> - LPI_FUNCTION(dmic3_data),
> - LPI_FUNCTION(i2s1_clk),
> - LPI_FUNCTION(i2s1_data),
> - LPI_FUNCTION(i2s1_ws),
> - LPI_FUNCTION(i2s2_clk),
> - LPI_FUNCTION(i2s2_data),
> - LPI_FUNCTION(i2s2_ws),
> - LPI_FUNCTION(qua_mi2s_data),
> - LPI_FUNCTION(qua_mi2s_sclk),
> - LPI_FUNCTION(qua_mi2s_ws),
> - LPI_FUNCTION(swr_rx_clk),
> - LPI_FUNCTION(swr_rx_data),
> - LPI_FUNCTION(swr_tx_clk),
> - LPI_FUNCTION(swr_tx_data),
> - LPI_FUNCTION(wsa_swr_clk),
> - LPI_FUNCTION(wsa_swr_data),
> -};
> -
> -static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
> - .pins = sm8250_lpi_pins,
> - .npins = ARRAY_SIZE(sm8250_lpi_pins),
> - .groups = sm8250_groups,
> - .ngroups = ARRAY_SIZE(sm8250_groups),
> - .functions = sm8250_functions,
> - .nfunctions = ARRAY_SIZE(sm8250_functions),
> -};
> +#include "pinctrl-lpass-lpi.h"
>
> static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
> unsigned int addr)
> @@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = {
> .dbg_show = lpi_gpio_dbg_show,
> };
>
> -static int lpi_pinctrl_probe(struct platform_device *pdev)
> +int lpi_pinctrl_probe(struct platform_device *pdev)
> {
> const struct lpi_pinctrl_variant_data *data;
> struct device *dev = &pdev->dev;
> @@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
>
> return ret;
> }
> +EXPORT_SYMBOL(lpi_pinctrl_probe);
>
> -static int lpi_pinctrl_remove(struct platform_device *pdev)
> +
> +int lpi_pinctrl_remove(struct platform_device *pdev)
> {
> struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
>
> @@ -671,25 +452,8 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
>
> return 0;
> }
> +EXPORT_SYMBOL(lpi_pinctrl_remove);
>
> -static const struct of_device_id lpi_pinctrl_of_match[] = {
> - {
> - .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
> - .data = &sm8250_lpi_data,
> - },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> -
> -static struct platform_driver lpi_pinctrl_driver = {
> - .driver = {
> - .name = "qcom-lpass-lpi-pinctrl",
> - .of_match_table = lpi_pinctrl_of_match,
> - },
> - .probe = lpi_pinctrl_probe,
> - .remove = lpi_pinctrl_remove,
> -};
> -
> -module_platform_driver(lpi_pinctrl_driver);
> MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
> MODULE_LICENSE("GPL");
> +
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> new file mode 100644
> index 0000000..ad84565
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> @@ -0,0 +1,98 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020 Linaro Ltd.
> + */
> +#ifndef __PINCTRL_LPASS_LPI_H__
> +#define __PINCTRL_LPASS_LPI_H__
> +
> +#define LPI_SLEW_RATE_CTL_REG 0xa000
> +#define LPI_TLMM_REG_OFFSET 0x1000
> +#define LPI_SLEW_RATE_MAX 0x03
> +#define LPI_SLEW_BITS_SIZE 0x02
> +#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
> +#define LPI_GPIO_CFG_REG 0x00
> +#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
> +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
> +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
> +#define LPI_GPIO_OE_MASK BIT(9)
> +#define LPI_GPIO_VALUE_REG 0x04
> +#define LPI_GPIO_VALUE_IN_MASK BIT(0)
> +#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
> +
> +#define LPI_GPIO_BIAS_DISABLE 0x0
> +#define LPI_GPIO_PULL_DOWN 0x1
> +#define LPI_GPIO_KEEPER 0x2
> +#define LPI_GPIO_PULL_UP 0x3
> +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
> +#define NO_SLEW -1
> +
> +#define LPI_FUNCTION(fname) \
> + [LPI_MUX_##fname] = { \
> + .name = #fname, \
> + .groups = fname##_groups, \
> + .ngroups = ARRAY_SIZE(fname##_groups), \
> + }
> +
> +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
> + { \
> + .name = "gpio" #id, \
> + .pins = gpio##id##_pins, \
> + .pin = id, \
> + .slew_offset = soff, \
> + .npins = ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + LPI_MUX_gpio, \
> + LPI_MUX_##f1, \
> + LPI_MUX_##f2, \
> + LPI_MUX_##f3, \
> + LPI_MUX_##f4, \
> + }, \
> + .nfuncs = 5, \
> + }
> +
> +struct lpi_pingroup {
> + const char *name;
> + const unsigned int *pins;
> + unsigned int npins;
> + unsigned int pin;
> + /* Bit offset in slew register for SoundWire pins only */
> + int slew_offset;
> + unsigned int *funcs;
> + unsigned int nfuncs;
> +};
> +
> +struct lpi_function {
> + const char *name;
> + const char * const *groups;
> + unsigned int ngroups;
> +};
> +
> +struct lpi_pinctrl_variant_data {
> + const struct pinctrl_pin_desc *pins;
> + int npins;
> + const struct lpi_pingroup *groups;
> + int ngroups;
> + const struct lpi_function *functions;
> + int nfunctions;
> +};
> +
> +#define MAX_LPI_NUM_CLKS 2
> +
> +struct lpi_pinctrl {
Afaict this is only used by the common code, if so there's no need to
expose it in the header file.
> + struct device *dev;
> + struct pinctrl_dev *ctrl;
> + struct gpio_chip chip;
> + struct pinctrl_desc desc;
> + char __iomem *tlmm_base;
> + char __iomem *slew_base;
> + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
> + struct mutex slew_access_lock;
> + const struct lpi_pinctrl_variant_data *data;
> +};
> +
> +int lpi_pinctrl_probe(struct platform_device *pdev);
> +int lpi_pinctrl_remove(struct platform_device *pdev);
> +
> +#endif /*__PINCTRL_LPASS_LPI_H__*/
> +
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
> new file mode 100644
> index 0000000..9a5db15
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020 Linaro Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-lpass-lpi.h"
> +
> +enum lpass_lpi_functions {
> + LPI_MUX_dmic1_clk,
> + LPI_MUX_dmic1_data,
> + LPI_MUX_dmic2_clk,
> + LPI_MUX_dmic2_data,
> + LPI_MUX_dmic3_clk,
> + LPI_MUX_dmic3_data,
> + LPI_MUX_i2s1_clk,
> + LPI_MUX_i2s1_data,
> + LPI_MUX_i2s1_ws,
> + LPI_MUX_i2s2_clk,
> + LPI_MUX_i2s2_data,
> + LPI_MUX_i2s2_ws,
> + LPI_MUX_qua_mi2s_data,
> + LPI_MUX_qua_mi2s_sclk,
> + LPI_MUX_qua_mi2s_ws,
> + LPI_MUX_swr_rx_clk,
> + LPI_MUX_swr_rx_data,
> + LPI_MUX_swr_tx_clk,
> + LPI_MUX_swr_tx_data,
> + LPI_MUX_wsa_swr_clk,
> + LPI_MUX_wsa_swr_data,
> + LPI_MUX_gpio,
> + LPI_MUX__,
> +};
> +
> +static const unsigned int gpio0_pins[] = { 0 };
> +static const unsigned int gpio1_pins[] = { 1 };
> +static const unsigned int gpio2_pins[] = { 2 };
> +static const unsigned int gpio3_pins[] = { 3 };
> +static const unsigned int gpio4_pins[] = { 4 };
> +static const unsigned int gpio5_pins[] = { 5 };
> +static const unsigned int gpio6_pins[] = { 6 };
> +static const unsigned int gpio7_pins[] = { 7 };
> +static const unsigned int gpio8_pins[] = { 8 };
> +static const unsigned int gpio9_pins[] = { 9 };
> +static const unsigned int gpio10_pins[] = { 10 };
> +static const unsigned int gpio11_pins[] = { 11 };
> +static const unsigned int gpio12_pins[] = { 12 };
> +static const unsigned int gpio13_pins[] = { 13 };
> +
> +/* sm8250 variant specific data */
> +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
> + PINCTRL_PIN(0, "gpio0"),
> + PINCTRL_PIN(1, "gpio1"),
> + PINCTRL_PIN(2, "gpio2"),
> + PINCTRL_PIN(3, "gpio3"),
> + PINCTRL_PIN(4, "gpio4"),
> + PINCTRL_PIN(5, "gpio5"),
> + PINCTRL_PIN(6, "gpio6"),
> + PINCTRL_PIN(7, "gpio7"),
> + PINCTRL_PIN(8, "gpio8"),
> + PINCTRL_PIN(9, "gpio9"),
> + PINCTRL_PIN(10, "gpio10"),
> + PINCTRL_PIN(11, "gpio11"),
> + PINCTRL_PIN(12, "gpio12"),
> + PINCTRL_PIN(13, "gpio13"),
> +};
> +
> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> +static const char * const dmic1_clk_groups[] = { "gpio6" };
> +static const char * const dmic1_data_groups[] = { "gpio7" };
> +static const char * const dmic2_clk_groups[] = { "gpio8" };
> +static const char * const dmic2_data_groups[] = { "gpio9" };
> +static const char * const i2s2_clk_groups[] = { "gpio10" };
> +static const char * const i2s2_ws_groups[] = { "gpio11" };
> +static const char * const dmic3_clk_groups[] = { "gpio12" };
> +static const char * const dmic3_data_groups[] = { "gpio13" };
> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> +static const char * const i2s1_clk_groups[] = { "gpio6" };
> +static const char * const i2s1_ws_groups[] = { "gpio7" };
> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
> +
> +static const struct lpi_pingroup sm8250_groups[] = {
> + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
> + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
> + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
> + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
> + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
> + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
> + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
> +};
> +
> +static const struct lpi_function sm8250_functions[] = {
> + LPI_FUNCTION(dmic1_clk),
> + LPI_FUNCTION(dmic1_data),
> + LPI_FUNCTION(dmic2_clk),
> + LPI_FUNCTION(dmic2_data),
> + LPI_FUNCTION(dmic3_clk),
> + LPI_FUNCTION(dmic3_data),
> + LPI_FUNCTION(i2s1_clk),
> + LPI_FUNCTION(i2s1_data),
> + LPI_FUNCTION(i2s1_ws),
> + LPI_FUNCTION(i2s2_clk),
> + LPI_FUNCTION(i2s2_data),
> + LPI_FUNCTION(i2s2_ws),
> + LPI_FUNCTION(qua_mi2s_data),
> + LPI_FUNCTION(qua_mi2s_sclk),
> + LPI_FUNCTION(qua_mi2s_ws),
> + LPI_FUNCTION(swr_rx_clk),
> + LPI_FUNCTION(swr_rx_data),
> + LPI_FUNCTION(swr_tx_clk),
> + LPI_FUNCTION(swr_tx_data),
> + LPI_FUNCTION(wsa_swr_clk),
> + LPI_FUNCTION(wsa_swr_data),
> +};
> +
> +static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
> + .pins = sm8250_lpi_pins,
> + .npins = ARRAY_SIZE(sm8250_lpi_pins),
> + .groups = sm8250_groups,
> + .ngroups = ARRAY_SIZE(sm8250_groups),
> + .functions = sm8250_functions,
> + .nfunctions = ARRAY_SIZE(sm8250_functions),
> +};
> +
> +static const struct of_device_id lpi_pinctrl_of_match[] = {
> + {
> + .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
> + .data = &sm8250_lpi_data,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> +
> +static struct platform_driver lpi_pinctrl_driver = {
> + .driver = {
> + .name = "qcom-sm8250-lpass-lpi-pinctrl",
> + .of_match_table = lpi_pinctrl_of_match,
> + },
> + .probe = lpi_pinctrl_probe,
> + .remove = lpi_pinctrl_remove,
> +};
> +
> +module_platform_driver(lpi_pinctrl_driver);
> +MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver");
> +MODULE_LICENSE("GPL");
> +
Unnecessary empty line.
Thanks,
Bjorn
> --
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>
On 12/6/2021 8:05 AM, Bjorn Andersson wrote:
Thanks for Your Time Bjorn!!!
> On Fri 03 Dec 03:32 PST 2021, Srinivasa Rao Mandadapu wrote:
>
>> From: Srinivasa Rao Mandadapu <[email protected]>
>>
>> Update bulk clock voting to optional voting as ADSP bypass platform doesn't
>> need macro and decodec clocks, these are maintained as power domains and
>> operated from lpass audio core cc.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Co-developed-by: Venkata Prasad Potturu <[email protected]>
>> Signed-off-by: Venkata Prasad Potturu <[email protected]>
>> ---
>> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> index bcc12f6..c2a1110 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> @@ -394,7 +394,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev)
>> return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
>> "Slew resource not provided\n");
>>
>> - ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
>> + ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
> If some platforms requires this clock and others doesn't have one, then
> please make this statement conditional on the compatible, rather than
> making it optional on both.
>
> Thanks,
> Bjorn
Okay. will add one flag in lpi_pinctrl_variant_data structure and handle
it accordingly.
>> if (ret)
>> return dev_err_probe(dev, ret, "Can't get clocks\n");
>>
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>>
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
On 12/6/2021 9:55 PM, Bjorn Andersson wrote:
Thanks for your time Bjorn!!
> On Fri 03 Dec 05:32 CST 2021, Srinivasa Rao Mandadapu wrote:
>
>> From: Srinivasa Rao Mandadapu <[email protected]>
>>
>> Add pin control support for SC7280 LPASS LPI.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Co-developed-by: Venkata Prasad Potturu <[email protected]>
>> Signed-off-by: Venkata Prasad Potturu <[email protected]>
>> ---
>> drivers/pinctrl/qcom/Kconfig | 8 ++
>> drivers/pinctrl/qcom/Makefile | 1 +
>> drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 169 ++++++++++++++++++++++++
>> 3 files changed, 178 insertions(+)
>> create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index e750e10..37fe868 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -328,4 +328,12 @@ config PINCTRL_SM8250_LPASS_LPI
>> Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
>>
>> +config PINCTRL_SC7280_LPASS_LPI
>> + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
> You misspelled SC7280 here.
Okay. will address it.
>
>> + depends on PINCTRL_LPASS_LPI
>> + help
>> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> + (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
>> +
>> endif
>> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
>> index 8bc877e..6c3ddaf 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -38,3 +38,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
>> obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
>> +obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o
> Please keep these entries sorted alphabetically, same with Kconfig.
Okay. will address it.
>
> Regards,
> Bjorn
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
>> new file mode 100644
>> index 0000000..94bec15
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
>> @@ -0,0 +1,169 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> + * ALSA SoC platform-machine driver for QTi LPASS
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/gpio/driver.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "pinctrl-lpass-lpi.h"
>> +
>> +enum lpass_lpi_functions {
>> + LPI_MUX_dmic1_clk,
>> + LPI_MUX_dmic1_data,
>> + LPI_MUX_dmic2_clk,
>> + LPI_MUX_dmic2_data,
>> + LPI_MUX_dmic3_clk,
>> + LPI_MUX_dmic3_data,
>> + LPI_MUX_i2s1_clk,
>> + LPI_MUX_i2s1_data,
>> + LPI_MUX_i2s1_ws,
>> + LPI_MUX_i2s2_clk,
>> + LPI_MUX_i2s2_data,
>> + LPI_MUX_i2s2_ws,
>> + LPI_MUX_qua_mi2s_data,
>> + LPI_MUX_qua_mi2s_sclk,
>> + LPI_MUX_qua_mi2s_ws,
>> + LPI_MUX_swr_rx_clk,
>> + LPI_MUX_swr_rx_data,
>> + LPI_MUX_swr_tx_clk,
>> + LPI_MUX_swr_tx_data,
>> + LPI_MUX_wsa_swr_clk,
>> + LPI_MUX_wsa_swr_data,
>> + LPI_MUX_gpio,
>> + LPI_MUX__,
>> +};
>> +
>> +static const unsigned int gpio0_pins[] = { 0 };
>> +static const unsigned int gpio1_pins[] = { 1 };
>> +static const unsigned int gpio2_pins[] = { 2 };
>> +static const unsigned int gpio3_pins[] = { 3 };
>> +static const unsigned int gpio4_pins[] = { 4 };
>> +static const unsigned int gpio5_pins[] = { 5 };
>> +static const unsigned int gpio6_pins[] = { 6 };
>> +static const unsigned int gpio7_pins[] = { 7 };
>> +static const unsigned int gpio8_pins[] = { 8 };
>> +static const unsigned int gpio9_pins[] = { 9 };
>> +static const unsigned int gpio10_pins[] = { 10 };
>> +static const unsigned int gpio11_pins[] = { 11 };
>> +static const unsigned int gpio12_pins[] = { 12 };
>> +static const unsigned int gpio13_pins[] = { 13 };
>> +static const unsigned int gpio14_pins[] = { 14 };
>> +
>> +/* sc7280 variant specific data */
>> +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = {
>> + PINCTRL_PIN(0, "gpio0"),
>> + PINCTRL_PIN(1, "gpio1"),
>> + PINCTRL_PIN(2, "gpio2"),
>> + PINCTRL_PIN(3, "gpio3"),
>> + PINCTRL_PIN(4, "gpio4"),
>> + PINCTRL_PIN(5, "gpio5"),
>> + PINCTRL_PIN(6, "gpio6"),
>> + PINCTRL_PIN(7, "gpio7"),
>> + PINCTRL_PIN(8, "gpio8"),
>> + PINCTRL_PIN(9, "gpio9"),
>> + PINCTRL_PIN(10, "gpio10"),
>> + PINCTRL_PIN(11, "gpio11"),
>> + PINCTRL_PIN(12, "gpio12"),
>> + PINCTRL_PIN(13, "gpio13"),
>> + PINCTRL_PIN(14, "gpio14"),
>> +};
>> +
>> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
>> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" };
>> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
>> +static const char * const dmic1_clk_groups[] = { "gpio6" };
>> +static const char * const dmic1_data_groups[] = { "gpio7" };
>> +static const char * const dmic2_clk_groups[] = { "gpio8" };
>> +static const char * const dmic2_data_groups[] = { "gpio9" };
>> +static const char * const i2s2_clk_groups[] = { "gpio10" };
>> +static const char * const i2s2_ws_groups[] = { "gpio11" };
>> +static const char * const dmic3_clk_groups[] = { "gpio12" };
>> +static const char * const dmic3_data_groups[] = { "gpio13" };
>> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
>> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
>> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
>> +static const char * const i2s1_clk_groups[] = { "gpio6" };
>> +static const char * const i2s1_ws_groups[] = { "gpio7" };
>> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
>> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
>> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
>> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" };
>> +
>> +static const struct lpi_pingroup sc7280_groups[] = {
>> + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
>> + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
>> + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
>> + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
>> + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
>> + LPI_PINGROUP(5, 12, swr_rx_data, _, _, _),
>> + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
>> + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
>> + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
>> + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
>> + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
>> + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
>> + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
>> + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
>> + LPI_PINGROUP(14, 6, swr_tx_data, _, _, _),
>> +};
>> +
>> +static const struct lpi_function sc7280_functions[] = {
>> + LPI_FUNCTION(dmic1_clk),
>> + LPI_FUNCTION(dmic1_data),
>> + LPI_FUNCTION(dmic2_clk),
>> + LPI_FUNCTION(dmic2_data),
>> + LPI_FUNCTION(dmic3_clk),
>> + LPI_FUNCTION(dmic3_data),
>> + LPI_FUNCTION(i2s1_clk),
>> + LPI_FUNCTION(i2s1_data),
>> + LPI_FUNCTION(i2s1_ws),
>> + LPI_FUNCTION(i2s2_clk),
>> + LPI_FUNCTION(i2s2_data),
>> + LPI_FUNCTION(i2s2_ws),
>> + LPI_FUNCTION(qua_mi2s_data),
>> + LPI_FUNCTION(qua_mi2s_sclk),
>> + LPI_FUNCTION(qua_mi2s_ws),
>> + LPI_FUNCTION(swr_rx_clk),
>> + LPI_FUNCTION(swr_rx_data),
>> + LPI_FUNCTION(swr_tx_clk),
>> + LPI_FUNCTION(swr_tx_data),
>> + LPI_FUNCTION(wsa_swr_clk),
>> + LPI_FUNCTION(wsa_swr_data),
>> +};
>> +
>> +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = {
>> + .pins = sc7280_lpi_pins,
>> + .npins = ARRAY_SIZE(sc7280_lpi_pins),
>> + .groups = sc7280_groups,
>> + .ngroups = ARRAY_SIZE(sc7280_groups),
>> + .functions = sc7280_functions,
>> + .nfunctions = ARRAY_SIZE(sc7280_functions),
>> +};
>> +
>> +static const struct of_device_id lpi_pinctrl_of_match[] = {
>> + {
>> + .compatible = "qcom,sc7280-lpass-lpi-pinctrl",
>> + .data = &sc7280_lpi_data,
>> + },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
>> +
>> +static struct platform_driver lpi_pinctrl_driver = {
>> + .driver = {
>> + .name = "qcom-sc7280-lpass-lpi-pinctrl",
>> + .of_match_table = lpi_pinctrl_of_match,
>> + },
>> + .probe = lpi_pinctrl_probe,
>> + .remove = lpi_pinctrl_remove,
>> +};
>> +
>> +module_platform_driver(lpi_pinctrl_driver);
>> +MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver");
>> +MODULE_LICENSE("GPL");
>> +
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>>
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
On 12/6/2021 10:02 PM, Bjorn Andersson wrote:
Thanks for your Valuable inputs Bjorn!!!
> On Fri 03 Dec 05:32 CST 2021, Srinivasa Rao Mandadapu wrote:
>
> I don't see anything _wrong_ with the current filename, so this patch
> isn't really moving chip function to the _right_ files.
>
> May I suggest that you make $subject:
>
> "pinctrl: qcom: Extract chip specific LPASS LPI code"
Okay. Will change accordingly.
>> From: Srinivasa Rao Mandadapu <[email protected]>
>>
>> Update lpass lpi pin control driver to accommodate new lpass variant
>> SoC specific drivers.
> I also have a hard time parsing this sentence.
>
>> Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file
>> and common declarations to pinctrl-lpass-lpi.h header file.
> How about simply:
>
> Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver
> to allow reusing the common code in the addition of subsequent
> platforms.
Okay. Will change accordingly.
>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Co-developed-by: Venkata Prasad Potturu <[email protected]>
>> Signed-off-by: Venkata Prasad Potturu <[email protected]>
>> ---
>> drivers/pinctrl/qcom/Kconfig | 8 +
>> drivers/pinctrl/qcom/Makefile | 1 +
>> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 250 +-----------------------
>> drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 98 ++++++++++
>> drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 166 ++++++++++++++++
>> 5 files changed, 280 insertions(+), 243 deletions(-)
>> create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
>> create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index 5ff4207..e750e10 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -320,4 +320,12 @@ config PINCTRL_LPASS_LPI
>> Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> (Low Power Island) found on the Qualcomm Technologies Inc SoCs.
>>
>> +config PINCTRL_SM8250_LPASS_LPI
>> + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
>> + depends on PINCTRL_LPASS_LPI
>> + help
>> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> + (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
>> +
>> endif
>> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
>> index 7a12e8c..8bc877e 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
>> obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
>> +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> index 2f19ab4..bcc12f6 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> @@ -4,237 +4,16 @@
>> * Copyright (c) 2020 Linaro Ltd.
>> */
>>
>> -#include <linux/bitops.h>
>> -#include <linux/bitfield.h>
>> #include <linux/clk.h>
>> #include <linux/gpio/driver.h>
>> -#include <linux/io.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> -#include <linux/of.h>
>> #include <linux/pinctrl/pinconf-generic.h>
>> #include <linux/pinctrl/pinconf.h>
>> #include <linux/pinctrl/pinmux.h>
>> -#include <linux/platform_device.h>
>> -#include <linux/slab.h>
>> -#include <linux/types.h>
>> #include "../core.h"
>> #include "../pinctrl-utils.h"
>> -
>> -#define LPI_SLEW_RATE_CTL_REG 0xa000
>> -#define LPI_TLMM_REG_OFFSET 0x1000
>> -#define LPI_SLEW_RATE_MAX 0x03
>> -#define LPI_SLEW_BITS_SIZE 0x02
>> -#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
>> -#define LPI_GPIO_CFG_REG 0x00
>> -#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
>> -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
>> -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
>> -#define LPI_GPIO_OE_MASK BIT(9)
>> -#define LPI_GPIO_VALUE_REG 0x04
>> -#define LPI_GPIO_VALUE_IN_MASK BIT(0)
>> -#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
>> -
>> -#define LPI_GPIO_BIAS_DISABLE 0x0
>> -#define LPI_GPIO_PULL_DOWN 0x1
>> -#define LPI_GPIO_KEEPER 0x2
>> -#define LPI_GPIO_PULL_UP 0x3
>> -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
>> -#define NO_SLEW -1
>> -
>> -#define LPI_FUNCTION(fname) \
>> - [LPI_MUX_##fname] = { \
>> - .name = #fname, \
>> - .groups = fname##_groups, \
>> - .ngroups = ARRAY_SIZE(fname##_groups), \
>> - }
>> -
>> -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
>> - { \
>> - .name = "gpio" #id, \
>> - .pins = gpio##id##_pins, \
>> - .pin = id, \
>> - .slew_offset = soff, \
>> - .npins = ARRAY_SIZE(gpio##id##_pins), \
>> - .funcs = (int[]){ \
>> - LPI_MUX_gpio, \
>> - LPI_MUX_##f1, \
>> - LPI_MUX_##f2, \
>> - LPI_MUX_##f3, \
>> - LPI_MUX_##f4, \
>> - }, \
>> - .nfuncs = 5, \
>> - }
>> -
>> -struct lpi_pingroup {
>> - const char *name;
>> - const unsigned int *pins;
>> - unsigned int npins;
>> - unsigned int pin;
>> - /* Bit offset in slew register for SoundWire pins only */
>> - int slew_offset;
>> - unsigned int *funcs;
>> - unsigned int nfuncs;
>> -};
>> -
>> -struct lpi_function {
>> - const char *name;
>> - const char * const *groups;
>> - unsigned int ngroups;
>> -};
>> -
>> -struct lpi_pinctrl_variant_data {
>> - const struct pinctrl_pin_desc *pins;
>> - int npins;
>> - const struct lpi_pingroup *groups;
>> - int ngroups;
>> - const struct lpi_function *functions;
>> - int nfunctions;
>> -};
>> -
>> -#define MAX_LPI_NUM_CLKS 2
>> -
>> -struct lpi_pinctrl {
>> - struct device *dev;
>> - struct pinctrl_dev *ctrl;
>> - struct gpio_chip chip;
>> - struct pinctrl_desc desc;
>> - char __iomem *tlmm_base;
>> - char __iomem *slew_base;
>> - struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
>> - struct mutex slew_access_lock;
>> - const struct lpi_pinctrl_variant_data *data;
>> -};
>> -
>> -/* sm8250 variant specific data */
>> -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
>> - PINCTRL_PIN(0, "gpio0"),
>> - PINCTRL_PIN(1, "gpio1"),
>> - PINCTRL_PIN(2, "gpio2"),
>> - PINCTRL_PIN(3, "gpio3"),
>> - PINCTRL_PIN(4, "gpio4"),
>> - PINCTRL_PIN(5, "gpio5"),
>> - PINCTRL_PIN(6, "gpio6"),
>> - PINCTRL_PIN(7, "gpio7"),
>> - PINCTRL_PIN(8, "gpio8"),
>> - PINCTRL_PIN(9, "gpio9"),
>> - PINCTRL_PIN(10, "gpio10"),
>> - PINCTRL_PIN(11, "gpio11"),
>> - PINCTRL_PIN(12, "gpio12"),
>> - PINCTRL_PIN(13, "gpio13"),
>> -};
>> -
>> -enum sm8250_lpi_functions {
>> - LPI_MUX_dmic1_clk,
>> - LPI_MUX_dmic1_data,
>> - LPI_MUX_dmic2_clk,
>> - LPI_MUX_dmic2_data,
>> - LPI_MUX_dmic3_clk,
>> - LPI_MUX_dmic3_data,
>> - LPI_MUX_i2s1_clk,
>> - LPI_MUX_i2s1_data,
>> - LPI_MUX_i2s1_ws,
>> - LPI_MUX_i2s2_clk,
>> - LPI_MUX_i2s2_data,
>> - LPI_MUX_i2s2_ws,
>> - LPI_MUX_qua_mi2s_data,
>> - LPI_MUX_qua_mi2s_sclk,
>> - LPI_MUX_qua_mi2s_ws,
>> - LPI_MUX_swr_rx_clk,
>> - LPI_MUX_swr_rx_data,
>> - LPI_MUX_swr_tx_clk,
>> - LPI_MUX_swr_tx_data,
>> - LPI_MUX_wsa_swr_clk,
>> - LPI_MUX_wsa_swr_data,
>> - LPI_MUX_gpio,
>> - LPI_MUX__,
>> -};
>> -
>> -static const unsigned int gpio0_pins[] = { 0 };
>> -static const unsigned int gpio1_pins[] = { 1 };
>> -static const unsigned int gpio2_pins[] = { 2 };
>> -static const unsigned int gpio3_pins[] = { 3 };
>> -static const unsigned int gpio4_pins[] = { 4 };
>> -static const unsigned int gpio5_pins[] = { 5 };
>> -static const unsigned int gpio6_pins[] = { 6 };
>> -static const unsigned int gpio7_pins[] = { 7 };
>> -static const unsigned int gpio8_pins[] = { 8 };
>> -static const unsigned int gpio9_pins[] = { 9 };
>> -static const unsigned int gpio10_pins[] = { 10 };
>> -static const unsigned int gpio11_pins[] = { 11 };
>> -static const unsigned int gpio12_pins[] = { 12 };
>> -static const unsigned int gpio13_pins[] = { 13 };
>> -static const char * const swr_tx_clk_groups[] = { "gpio0" };
>> -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
>> -static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
>> -static const char * const dmic1_clk_groups[] = { "gpio6" };
>> -static const char * const dmic1_data_groups[] = { "gpio7" };
>> -static const char * const dmic2_clk_groups[] = { "gpio8" };
>> -static const char * const dmic2_data_groups[] = { "gpio9" };
>> -static const char * const i2s2_clk_groups[] = { "gpio10" };
>> -static const char * const i2s2_ws_groups[] = { "gpio11" };
>> -static const char * const dmic3_clk_groups[] = { "gpio12" };
>> -static const char * const dmic3_data_groups[] = { "gpio13" };
>> -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
>> -static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
>> -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
>> -static const char * const i2s1_clk_groups[] = { "gpio6" };
>> -static const char * const i2s1_ws_groups[] = { "gpio7" };
>> -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
>> -static const char * const wsa_swr_clk_groups[] = { "gpio10" };
>> -static const char * const wsa_swr_data_groups[] = { "gpio11" };
>> -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
>> -
>> -static const struct lpi_pingroup sm8250_groups[] = {
>> - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
>> - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
>> - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
>> - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
>> - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
>> - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
>> - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
>> - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
>> - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
>> - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
>> - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
>> - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
>> - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
>> - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
>> -};
>> -
>> -static const struct lpi_function sm8250_functions[] = {
>> - LPI_FUNCTION(dmic1_clk),
>> - LPI_FUNCTION(dmic1_data),
>> - LPI_FUNCTION(dmic2_clk),
>> - LPI_FUNCTION(dmic2_data),
>> - LPI_FUNCTION(dmic3_clk),
>> - LPI_FUNCTION(dmic3_data),
>> - LPI_FUNCTION(i2s1_clk),
>> - LPI_FUNCTION(i2s1_data),
>> - LPI_FUNCTION(i2s1_ws),
>> - LPI_FUNCTION(i2s2_clk),
>> - LPI_FUNCTION(i2s2_data),
>> - LPI_FUNCTION(i2s2_ws),
>> - LPI_FUNCTION(qua_mi2s_data),
>> - LPI_FUNCTION(qua_mi2s_sclk),
>> - LPI_FUNCTION(qua_mi2s_ws),
>> - LPI_FUNCTION(swr_rx_clk),
>> - LPI_FUNCTION(swr_rx_data),
>> - LPI_FUNCTION(swr_tx_clk),
>> - LPI_FUNCTION(swr_tx_data),
>> - LPI_FUNCTION(wsa_swr_clk),
>> - LPI_FUNCTION(wsa_swr_data),
>> -};
>> -
>> -static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
>> - .pins = sm8250_lpi_pins,
>> - .npins = ARRAY_SIZE(sm8250_lpi_pins),
>> - .groups = sm8250_groups,
>> - .ngroups = ARRAY_SIZE(sm8250_groups),
>> - .functions = sm8250_functions,
>> - .nfunctions = ARRAY_SIZE(sm8250_functions),
>> -};
>> +#include "pinctrl-lpass-lpi.h"
>>
>> static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
>> unsigned int addr)
>> @@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = {
>> .dbg_show = lpi_gpio_dbg_show,
>> };
>>
>> -static int lpi_pinctrl_probe(struct platform_device *pdev)
>> +int lpi_pinctrl_probe(struct platform_device *pdev)
>> {
>> const struct lpi_pinctrl_variant_data *data;
>> struct device *dev = &pdev->dev;
>> @@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
>>
>> return ret;
>> }
>> +EXPORT_SYMBOL(lpi_pinctrl_probe);
>>
>> -static int lpi_pinctrl_remove(struct platform_device *pdev)
>> +
>> +int lpi_pinctrl_remove(struct platform_device *pdev)
>> {
>> struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
>>
>> @@ -671,25 +452,8 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
>>
>> return 0;
>> }
>> +EXPORT_SYMBOL(lpi_pinctrl_remove);
>>
>> -static const struct of_device_id lpi_pinctrl_of_match[] = {
>> - {
>> - .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
>> - .data = &sm8250_lpi_data,
>> - },
>> - { }
>> -};
>> -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
>> -
>> -static struct platform_driver lpi_pinctrl_driver = {
>> - .driver = {
>> - .name = "qcom-lpass-lpi-pinctrl",
>> - .of_match_table = lpi_pinctrl_of_match,
>> - },
>> - .probe = lpi_pinctrl_probe,
>> - .remove = lpi_pinctrl_remove,
>> -};
>> -
>> -module_platform_driver(lpi_pinctrl_driver);
>> MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
>> MODULE_LICENSE("GPL");
>> +
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
>> new file mode 100644
>> index 0000000..ad84565
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
>> @@ -0,0 +1,98 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2020 Linaro Ltd.
>> + */
>> +#ifndef __PINCTRL_LPASS_LPI_H__
>> +#define __PINCTRL_LPASS_LPI_H__
>> +
>> +#define LPI_SLEW_RATE_CTL_REG 0xa000
>> +#define LPI_TLMM_REG_OFFSET 0x1000
>> +#define LPI_SLEW_RATE_MAX 0x03
>> +#define LPI_SLEW_BITS_SIZE 0x02
>> +#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
>> +#define LPI_GPIO_CFG_REG 0x00
>> +#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
>> +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
>> +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
>> +#define LPI_GPIO_OE_MASK BIT(9)
>> +#define LPI_GPIO_VALUE_REG 0x04
>> +#define LPI_GPIO_VALUE_IN_MASK BIT(0)
>> +#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
>> +
>> +#define LPI_GPIO_BIAS_DISABLE 0x0
>> +#define LPI_GPIO_PULL_DOWN 0x1
>> +#define LPI_GPIO_KEEPER 0x2
>> +#define LPI_GPIO_PULL_UP 0x3
>> +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
>> +#define NO_SLEW -1
>> +
>> +#define LPI_FUNCTION(fname) \
>> + [LPI_MUX_##fname] = { \
>> + .name = #fname, \
>> + .groups = fname##_groups, \
>> + .ngroups = ARRAY_SIZE(fname##_groups), \
>> + }
>> +
>> +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
>> + { \
>> + .name = "gpio" #id, \
>> + .pins = gpio##id##_pins, \
>> + .pin = id, \
>> + .slew_offset = soff, \
>> + .npins = ARRAY_SIZE(gpio##id##_pins), \
>> + .funcs = (int[]){ \
>> + LPI_MUX_gpio, \
>> + LPI_MUX_##f1, \
>> + LPI_MUX_##f2, \
>> + LPI_MUX_##f3, \
>> + LPI_MUX_##f4, \
>> + }, \
>> + .nfuncs = 5, \
>> + }
>> +
>> +struct lpi_pingroup {
>> + const char *name;
>> + const unsigned int *pins;
>> + unsigned int npins;
>> + unsigned int pin;
>> + /* Bit offset in slew register for SoundWire pins only */
>> + int slew_offset;
>> + unsigned int *funcs;
>> + unsigned int nfuncs;
>> +};
>> +
>> +struct lpi_function {
>> + const char *name;
>> + const char * const *groups;
>> + unsigned int ngroups;
>> +};
>> +
>> +struct lpi_pinctrl_variant_data {
>> + const struct pinctrl_pin_desc *pins;
>> + int npins;
>> + const struct lpi_pingroup *groups;
>> + int ngroups;
>> + const struct lpi_function *functions;
>> + int nfunctions;
>> +};
>> +
>> +#define MAX_LPI_NUM_CLKS 2
>> +
>> +struct lpi_pinctrl {
> Afaict this is only used by the common code, if so there's no need to
> expose it in the header file.
>
>> + struct device *dev;
>> + struct pinctrl_dev *ctrl;
>> + struct gpio_chip chip;
>> + struct pinctrl_desc desc;
>> + char __iomem *tlmm_base;
>> + char __iomem *slew_base;
>> + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
>> + struct mutex slew_access_lock;
>> + const struct lpi_pinctrl_variant_data *data;
>> +};
>> +
>> +int lpi_pinctrl_probe(struct platform_device *pdev);
>> +int lpi_pinctrl_remove(struct platform_device *pdev);
>> +
>> +#endif /*__PINCTRL_LPASS_LPI_H__*/
>> +
>> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>> new file mode 100644
>> index 0000000..9a5db15
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>> @@ -0,0 +1,166 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2020 Linaro Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/gpio/driver.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "pinctrl-lpass-lpi.h"
>> +
>> +enum lpass_lpi_functions {
>> + LPI_MUX_dmic1_clk,
>> + LPI_MUX_dmic1_data,
>> + LPI_MUX_dmic2_clk,
>> + LPI_MUX_dmic2_data,
>> + LPI_MUX_dmic3_clk,
>> + LPI_MUX_dmic3_data,
>> + LPI_MUX_i2s1_clk,
>> + LPI_MUX_i2s1_data,
>> + LPI_MUX_i2s1_ws,
>> + LPI_MUX_i2s2_clk,
>> + LPI_MUX_i2s2_data,
>> + LPI_MUX_i2s2_ws,
>> + LPI_MUX_qua_mi2s_data,
>> + LPI_MUX_qua_mi2s_sclk,
>> + LPI_MUX_qua_mi2s_ws,
>> + LPI_MUX_swr_rx_clk,
>> + LPI_MUX_swr_rx_data,
>> + LPI_MUX_swr_tx_clk,
>> + LPI_MUX_swr_tx_data,
>> + LPI_MUX_wsa_swr_clk,
>> + LPI_MUX_wsa_swr_data,
>> + LPI_MUX_gpio,
>> + LPI_MUX__,
>> +};
>> +
>> +static const unsigned int gpio0_pins[] = { 0 };
>> +static const unsigned int gpio1_pins[] = { 1 };
>> +static const unsigned int gpio2_pins[] = { 2 };
>> +static const unsigned int gpio3_pins[] = { 3 };
>> +static const unsigned int gpio4_pins[] = { 4 };
>> +static const unsigned int gpio5_pins[] = { 5 };
>> +static const unsigned int gpio6_pins[] = { 6 };
>> +static const unsigned int gpio7_pins[] = { 7 };
>> +static const unsigned int gpio8_pins[] = { 8 };
>> +static const unsigned int gpio9_pins[] = { 9 };
>> +static const unsigned int gpio10_pins[] = { 10 };
>> +static const unsigned int gpio11_pins[] = { 11 };
>> +static const unsigned int gpio12_pins[] = { 12 };
>> +static const unsigned int gpio13_pins[] = { 13 };
>> +
>> +/* sm8250 variant specific data */
>> +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
>> + PINCTRL_PIN(0, "gpio0"),
>> + PINCTRL_PIN(1, "gpio1"),
>> + PINCTRL_PIN(2, "gpio2"),
>> + PINCTRL_PIN(3, "gpio3"),
>> + PINCTRL_PIN(4, "gpio4"),
>> + PINCTRL_PIN(5, "gpio5"),
>> + PINCTRL_PIN(6, "gpio6"),
>> + PINCTRL_PIN(7, "gpio7"),
>> + PINCTRL_PIN(8, "gpio8"),
>> + PINCTRL_PIN(9, "gpio9"),
>> + PINCTRL_PIN(10, "gpio10"),
>> + PINCTRL_PIN(11, "gpio11"),
>> + PINCTRL_PIN(12, "gpio12"),
>> + PINCTRL_PIN(13, "gpio13"),
>> +};
>> +
>> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
>> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
>> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
>> +static const char * const dmic1_clk_groups[] = { "gpio6" };
>> +static const char * const dmic1_data_groups[] = { "gpio7" };
>> +static const char * const dmic2_clk_groups[] = { "gpio8" };
>> +static const char * const dmic2_data_groups[] = { "gpio9" };
>> +static const char * const i2s2_clk_groups[] = { "gpio10" };
>> +static const char * const i2s2_ws_groups[] = { "gpio11" };
>> +static const char * const dmic3_clk_groups[] = { "gpio12" };
>> +static const char * const dmic3_data_groups[] = { "gpio13" };
>> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
>> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
>> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
>> +static const char * const i2s1_clk_groups[] = { "gpio6" };
>> +static const char * const i2s1_ws_groups[] = { "gpio7" };
>> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
>> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
>> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
>> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
>> +
>> +static const struct lpi_pingroup sm8250_groups[] = {
>> + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
>> + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
>> + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
>> + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
>> + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
>> + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
>> + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
>> + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
>> + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
>> + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
>> + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
>> + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
>> + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
>> + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
>> +};
>> +
>> +static const struct lpi_function sm8250_functions[] = {
>> + LPI_FUNCTION(dmic1_clk),
>> + LPI_FUNCTION(dmic1_data),
>> + LPI_FUNCTION(dmic2_clk),
>> + LPI_FUNCTION(dmic2_data),
>> + LPI_FUNCTION(dmic3_clk),
>> + LPI_FUNCTION(dmic3_data),
>> + LPI_FUNCTION(i2s1_clk),
>> + LPI_FUNCTION(i2s1_data),
>> + LPI_FUNCTION(i2s1_ws),
>> + LPI_FUNCTION(i2s2_clk),
>> + LPI_FUNCTION(i2s2_data),
>> + LPI_FUNCTION(i2s2_ws),
>> + LPI_FUNCTION(qua_mi2s_data),
>> + LPI_FUNCTION(qua_mi2s_sclk),
>> + LPI_FUNCTION(qua_mi2s_ws),
>> + LPI_FUNCTION(swr_rx_clk),
>> + LPI_FUNCTION(swr_rx_data),
>> + LPI_FUNCTION(swr_tx_clk),
>> + LPI_FUNCTION(swr_tx_data),
>> + LPI_FUNCTION(wsa_swr_clk),
>> + LPI_FUNCTION(wsa_swr_data),
>> +};
>> +
>> +static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
>> + .pins = sm8250_lpi_pins,
>> + .npins = ARRAY_SIZE(sm8250_lpi_pins),
>> + .groups = sm8250_groups,
>> + .ngroups = ARRAY_SIZE(sm8250_groups),
>> + .functions = sm8250_functions,
>> + .nfunctions = ARRAY_SIZE(sm8250_functions),
>> +};
>> +
>> +static const struct of_device_id lpi_pinctrl_of_match[] = {
>> + {
>> + .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
>> + .data = &sm8250_lpi_data,
>> + },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
>> +
>> +static struct platform_driver lpi_pinctrl_driver = {
>> + .driver = {
>> + .name = "qcom-sm8250-lpass-lpi-pinctrl",
>> + .of_match_table = lpi_pinctrl_of_match,
>> + },
>> + .probe = lpi_pinctrl_probe,
>> + .remove = lpi_pinctrl_remove,
>> +};
>> +
>> +module_platform_driver(lpi_pinctrl_driver);
>> +MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver");
>> +MODULE_LICENSE("GPL");
>> +
> Unnecessary empty line.
>
> Thanks,
> Bjorn
>
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>>
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.