Remove a series of warnings seen when building with W=1, like:
Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
(also used in node /soc/timers@40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
Fabrice Gasnier (2):
ARM: dts: stm32: remove some timer duplicate unit-address on stm32f4
series
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f4
series
arch/arm/boot/dts/stm32429i-eval.dts | 12 +++++++++
arch/arm/boot/dts/stm32f429-disco.dts | 12 +++++++++
arch/arm/boot/dts/stm32f429.dtsi | 47 -----------------------------------
arch/arm/boot/dts/stm32f469-disco.dts | 12 +++++++++
4 files changed, 36 insertions(+), 47 deletions(-)
--
2.7.4
Several unused "timer" are duplicate nodes of "timers" nodes.
There are two dt-schemas:
- timer/st,stm32-timer.yaml: A timer is needed on STM32F4 series, on all
boards, to act as clockevent.
- mfd/st,stm32-timers.yaml: Timers can be used for other purpose.
By default, timer5 is left enabled to be used as clockevent. Remove all
other timer clockevent nodes that are currently unused and duplicated.
This removes several messages: Warning (unique_unit_address): /soc/timer@..
duplicate unit-address (also used in node /soc/timers@...)
Signed-off-by: Fabrice Gasnier <[email protected]>
---
arch/arm/boot/dts/stm32f429.dtsi | 40 ----------------------------------------
1 file changed, 40 deletions(-)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8748d58..f21b322 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -93,14 +93,6 @@
};
};
- timer2: timer@40000000 {
- compatible = "st,stm32-timer";
- reg = <0x40000000 0x400>;
- interrupts = <28>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
- status = "disabled";
- };
-
timers2: timers@40000000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -123,14 +115,6 @@
};
};
- timer3: timer@40000400 {
- compatible = "st,stm32-timer";
- reg = <0x40000400 0x400>;
- interrupts = <29>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
- status = "disabled";
- };
-
timers3: timers@40000400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -153,14 +137,6 @@
};
};
- timer4: timer@40000800 {
- compatible = "st,stm32-timer";
- reg = <0x40000800 0x400>;
- interrupts = <30>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
- status = "disabled";
- };
-
timers4: timers@40000800 {
#address-cells = <1>;
#size-cells = <0>;
@@ -212,14 +188,6 @@
};
};
- timer6: timer@40001000 {
- compatible = "st,stm32-timer";
- reg = <0x40001000 0x400>;
- interrupts = <54>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
- status = "disabled";
- };
-
timers6: timers@40001000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -236,14 +204,6 @@
};
};
- timer7: timer@40001400 {
- compatible = "st,stm32-timer";
- reg = <0x40001400 0x400>;
- interrupts = <55>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
- status = "disabled";
- };
-
timers7: timers@40001400 {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
Remove the following warnings seen when building with W=1.
Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
(also used in node /soc/timers@40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.
Timer5 is enabled by default on stm32f4 series, to act as clockevent. In
order to get rid of the W=1 warning, and be compliant with dt-schemas
(e.g. dtbs_check):
- In stm32f429.dtsi:
. Keep the more complete timers5 description
. Remove the most simple timer5 node that is duplicate
- In each board:
. adopt "st,stm32-timer" compatible for timers5, also add the interrupt
. use /delete-property/ and /delete-node/ so the it matches the
clockevent bindings
Note: all this is done in one shot (e.g. not split) to keep clockevent
functionality.
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
Signed-off-by: Fabrice Gasnier <[email protected]>
---
arch/arm/boot/dts/stm32429i-eval.dts | 12 ++++++++++++
arch/arm/boot/dts/stm32f429-disco.dts | 12 ++++++++++++
arch/arm/boot/dts/stm32f429.dtsi | 7 -------
arch/arm/boot/dts/stm32f469-disco.dts | 12 ++++++++++++
4 files changed, 36 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326..0d98aca 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -308,6 +308,18 @@
};
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 075ac57..06a7091 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -205,6 +205,18 @@
};
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index f21b322..1723346 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -159,13 +159,6 @@
};
};
- timer5: timer@40000c00 {
- compatible = "st,stm32-timer";
- reg = <0x40000c00 0x400>;
- interrupts = <50>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
- };
-
timers5: timers@40000c00 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 30905ce6..cac3a67 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -224,6 +224,18 @@
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart3 {
pinctrl-0 = <&usart3_pins_a>;
pinctrl-names = "default";
--
2.7.4
Hi Fabrice
On 12/8/21 11:33, Fabrice Gasnier wrote:
> Remove a series of warnings seen when building with W=1, like:
> Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
> (also used in node /soc/timers@40000c00)
>
> This approach is based on some discussions[1], to restructure the dtsi
> and dts files.
> [1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
>
> Fabrice Gasnier (2):
> ARM: dts: stm32: remove some timer duplicate unit-address on stm32f4
> series
> ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f4
> series
>
> arch/arm/boot/dts/stm32429i-eval.dts | 12 +++++++++
> arch/arm/boot/dts/stm32f429-disco.dts | 12 +++++++++
> arch/arm/boot/dts/stm32f429.dtsi | 47 -----------------------------------
> arch/arm/boot/dts/stm32f469-disco.dts | 12 +++++++++
> 4 files changed, 36 insertions(+), 47 deletions(-)
>
Series applied on stm32-next.
Thanks
Alex