2022-02-09 15:43:17

by Srinivasa Rao Mandadapu

[permalink] [raw]
Subject: [RESEND v8 0/3] Machine driver to support LPASS SC7280 sound card registration

This patch set is to add support for SC7280 sound card registration and
to add dt-bindings documentation file.

Srinivasa Rao Mandadapu (3):
ASoC: google: dt-bindings: Add sc7280-herobrine machine bindings
ASoC: qcom: Add macro for lpass DAI id's max limit
ASoC: qcom: SC7280: Add machine driver

Changes Since V7:
-- Create separate patch for dai id's macro.
-- Remove unused dapm widget structure.
-- Move to quicinc domain email id's.
Changes Since V6:
-- Remove redundant headers.
-- Move max ports macro to lpass.h header.
-- Arrange structure alignment.
-- Fix indentation errors.
-- Update module license.
Changes Since V5:
-- Add required properties to dt-bindings
Changes Since V4:
-- Add COMPILE_TEST flag in sc7280 configuration.
-- Remove redundant startup and shutdown callbacks of snd_soc_ops.
-- Fix typo errors.
Changes Since V3:
-- Change audio jack playpause key value.
Changes Since V2:
-- updated required field in bindings
-- updated Return type check with proper enum in sc7280.c
-- Updated Header name and Typos in sc7280.c
Changes Since V1:
-- Indentation changes and typo.

.../bindings/sound/google,sc7280-herobrine.yaml | 171 +++++++++++++
sound/soc/qcom/Kconfig | 14 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/lpass.h | 1 +
sound/soc/qcom/sc7280.c | 284 +++++++++++++++++++++
5 files changed, 472 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
create mode 100644 sound/soc/qcom/sc7280.c

--
2.7.4



2022-02-09 17:02:33

by Srinivasa Rao Mandadapu

[permalink] [raw]
Subject: [RESEND v8 3/3] ASoC: qcom: SC7280: Add machine driver

Add new machine driver to register sound card on sc7280 based targets and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S and soundwire interfaces.
Add support for audio jack detection, soundwire init and MBHC.

Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
---
sound/soc/qcom/Kconfig | 14 +++
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/sc7280.c | 284 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 300 insertions(+)
create mode 100644 sound/soc/qcom/sc7280.c

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index cc7c1de..932b082 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -152,4 +152,18 @@ config SND_SOC_SC7180
SC7180 SoC-based systems.
Say Y if you want to use audio device on this SoCs.

+config SND_SOC_SC7280
+ tristate "SoC Machine driver for SC7280 boards"
+ depends on I2C && SOUNDWIRE || COMPILE_TEST
+ select SND_SOC_QCOM_COMMON
+ select SND_SOC_LPASS_SC7280
+ select SND_SOC_MAX98357A
+ select SND_SOC_WCD938X
+ select SND_SOC_LPASS_RX_MACRO
+ select SND_SOC_LPASS_TX_MACRO
+ help
+ Add support for audio on Qualcomm Technologies Inc.
+ SC7280 SoC-based systems.
+ Say Y or M if you want to use audio device on this SoCs.
+
endif #SND_SOC_QCOM
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 1600ae5..625aec6 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -19,6 +19,7 @@ snd-soc-storm-objs := storm.o
snd-soc-apq8016-sbc-objs := apq8016_sbc.o
snd-soc-apq8096-objs := apq8096.o
snd-soc-sc7180-objs := sc7180.o
+snd-soc-sc7280-objs := sc7280.o
snd-soc-sdm845-objs := sdm845.o
snd-soc-sm8250-objs := sm8250.o
snd-soc-qcom-common-objs := common.o
@@ -27,6 +28,7 @@ obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
+obj-$(CONFIG_SND_SOC_SC7280) += snd-soc-sc7280.o
obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
diff --git a/sound/soc/qcom/sc7280.c b/sound/soc/qcom/sc7280.c
new file mode 100644
index 0000000..c686290
--- /dev/null
+++ b/sound/soc/qcom/sc7280.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+//
+// ALSA SoC Machine driver for sc7280
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
+
+#include "common.h"
+#include "lpass.h"
+
+struct sc7280_snd_data {
+ struct snd_soc_card card;
+ struct sdw_stream_runtime *sruntime[LPASS_MAX_PORTS];
+ struct snd_soc_jack hs_jack;
+ struct snd_soc_jack hdmi_jack;
+ bool jack_setup;
+ bool stream_prepared[LPASS_MAX_PORTS];
+};
+
+static void sc7280_jack_free(struct snd_jack *jack)
+{
+ struct snd_soc_component *component = jack->private_data;
+
+ snd_soc_component_set_jack(component, NULL, NULL);
+}
+
+static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ struct sc7280_snd_data *pdata = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_component *component = codec_dai->component;
+ struct snd_jack *jack;
+ int rval, i;
+
+ if (!pdata->jack_setup) {
+ rval = snd_soc_card_jack_new(card, "Headset Jack",
+ SND_JACK_HEADSET | SND_JACK_LINEOUT |
+ SND_JACK_MECHANICAL |
+ SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+ SND_JACK_BTN_4 | SND_JACK_BTN_5,
+ &pdata->hs_jack, NULL, 0);
+
+ if (rval < 0) {
+ dev_err(card->dev, "Unable to add Headset Jack\n");
+ return rval;
+ }
+
+ jack = pdata->hs_jack.jack;
+
+ snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+ snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+ snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+ snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+ jack->private_data = component;
+ jack->private_free = sc7280_jack_free;
+ pdata->jack_setup = true;
+ }
+ switch (cpu_dai->id) {
+ case LPASS_CDC_DMA_RX0:
+ case LPASS_CDC_DMA_TX3:
+ for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ rval = snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
+ if (rval != 0 && rval != -ENOTSUPP) {
+ dev_err(card->dev, "Failed to set jack: %d\n", rval);
+ return rval;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int sc7280_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ struct sc7280_snd_data *pdata = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+ struct snd_soc_component *component = codec_dai->component;
+ struct snd_jack *jack;
+ int rval;
+
+ rval = snd_soc_card_jack_new(card, "HDMI Jack", SND_JACK_LINEOUT,
+ &pdata->hdmi_jack, NULL, 0);
+
+ if (rval < 0) {
+ dev_err(card->dev, "Unable to add HDMI Jack\n");
+ return rval;
+ }
+
+ jack = pdata->hdmi_jack.jack;
+ jack->private_data = component;
+ jack->private_free = sc7280_jack_free;
+
+ return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
+}
+
+static int sc7280_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+ switch (cpu_dai->id) {
+ case LPASS_CDC_DMA_TX3:
+ return sc7280_headset_init(rtd);
+ case LPASS_CDC_DMA_RX0:
+ case LPASS_CDC_DMA_VA_TX0:
+ case MI2S_SECONDARY:
+ return 0;
+ case LPASS_DP_RX:
+ return sc7280_hdmi_init(rtd);
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
+ }
+
+ return -EINVAL;
+}
+
+static int sc7280_snd_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai;
+ const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct sc7280_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
+ struct sdw_stream_runtime *sruntime;
+ int i;
+
+ snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
+ snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, 48000, 48000);
+
+ switch (cpu_dai->id) {
+ case LPASS_CDC_DMA_TX3:
+ case LPASS_CDC_DMA_RX0:
+ for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ sruntime = snd_soc_dai_get_sdw_stream(codec_dai, substream->stream);
+ if (sruntime != ERR_PTR(-ENOTSUPP))
+ pdata->sruntime[cpu_dai->id] = sruntime;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int sc7280_snd_swr_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct sc7280_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+ int ret;
+
+ if (!sruntime)
+ return 0;
+
+ if (data->stream_prepared[cpu_dai->id]) {
+ sdw_disable_stream(sruntime);
+ sdw_deprepare_stream(sruntime);
+ data->stream_prepared[cpu_dai->id] = false;
+ }
+
+ ret = sdw_prepare_stream(sruntime);
+ if (ret)
+ return ret;
+
+ ret = sdw_enable_stream(sruntime);
+ if (ret) {
+ sdw_deprepare_stream(sruntime);
+ return ret;
+ }
+ data->stream_prepared[cpu_dai->id] = true;
+
+ return ret;
+}
+
+static int sc7280_snd_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+ switch (cpu_dai->id) {
+ case LPASS_CDC_DMA_RX0:
+ case LPASS_CDC_DMA_TX3:
+ return sc7280_snd_swr_prepare(substream);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int sc7280_snd_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sc7280_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+ switch (cpu_dai->id) {
+ case LPASS_CDC_DMA_RX0:
+ case LPASS_CDC_DMA_TX3:
+ if (sruntime && data->stream_prepared[cpu_dai->id]) {
+ sdw_disable_stream(sruntime);
+ sdw_deprepare_stream(sruntime);
+ data->stream_prepared[cpu_dai->id] = false;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static const struct snd_soc_ops sc7280_ops = {
+ .hw_params = sc7280_snd_hw_params,
+ .hw_free = sc7280_snd_hw_free,
+ .prepare = sc7280_snd_prepare,
+};
+
+static int sc7280_snd_platform_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card;
+ struct sc7280_snd_data *data;
+ struct device *dev = &pdev->dev;
+ struct snd_soc_dai_link *link;
+ int ret, i;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ card = &data->card;
+ snd_soc_card_set_drvdata(card, data);
+
+ card->owner = THIS_MODULE;
+ card->driver_name = "SC7280";
+ card->dev = dev;
+
+ ret = qcom_snd_parse_of(card);
+ if (ret)
+ return ret;
+
+ for_each_card_prelinks(card, i, link) {
+ link->init = sc7280_init;
+ link->ops = &sc7280_ops;
+ }
+
+ return devm_snd_soc_register_card(dev, card);
+}
+
+static const struct of_device_id sc7280_snd_device_id[] = {
+ { .compatible = "google,sc7280-herobrine" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sc7280_snd_device_id);
+
+static struct platform_driver sc7280_snd_driver = {
+ .probe = sc7280_snd_platform_probe,
+ .driver = {
+ .name = "msm-snd-sc7280",
+ .of_match_table = sc7280_snd_device_id,
+ .pm = &snd_soc_pm_ops,
+ },
+};
+module_platform_driver(sc7280_snd_driver);
+
+MODULE_DESCRIPTION("sc7280 ASoC Machine Driver");
+MODULE_LICENSE("GPL");
--
2.7.4


2022-02-09 17:28:42

by Mark Brown

[permalink] [raw]
Subject: Re: [RESEND v8 3/3] ASoC: qcom: SC7280: Add machine driver

On Wed, Feb 09, 2022 at 06:56:21PM +0530, Srinivasa Rao Mandadapu wrote:
> Add new machine driver to register sound card on sc7280 based targets and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S and soundwire interfaces.
> Add support for audio jack detection, soundwire init and MBHC.

This breaks an x86 allmodconfig build:

/mnt/kernel/sound/soc/qcom/sc7280.c: In function 'sc7280_snd_hw_params':
/mnt/kernel/sound/soc/qcom/sc7280.c:151:15: error: implicit declaration of function 'snd_soc_dai_get_sdw_stream'; did you mean 'snd_soc_dai_get_pcm_stream'? [-Werror=implicit-function-declaration]
151 | sruntime = snd_soc_dai_get_sdw_stream(codec_dai, substream->stream);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| snd_soc_dai_get_pcm_stream
/mnt/kernel/sound/soc/qcom/sc7280.c:151:13: error: assignment to 'struct sdw_stream_runtime *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
151 | sruntime = snd_soc_dai_get_sdw_stream(codec_dai, substream->stream);
| ^


Attachments:
(No filename) (1.09 kB)
signature.asc (499.00 B)
Download all attachments

2022-02-10 17:02:24

by Mark Brown

[permalink] [raw]
Subject: Re: [RESEND v8 0/3] Machine driver to support LPASS SC7280 sound card registration

On Wed, 9 Feb 2022 18:56:18 +0530, Srinivasa Rao Mandadapu wrote:
> This patch set is to add support for SC7280 sound card registration and
> to add dt-bindings documentation file.
>
> Srinivasa Rao Mandadapu (3):
> ASoC: google: dt-bindings: Add sc7280-herobrine machine bindings
> ASoC: qcom: Add macro for lpass DAI id's max limit
> ASoC: qcom: SC7280: Add machine driver
>
> [...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: google: dt-bindings: Add sc7280-herobrine machine bindings
commit: 7bd431486511482b6e789dd69d07654a1d8c5eba
[2/3] ASoC: qcom: Add macro for lpass DAI id's max limit
commit: 77d0ffef793da818741127f4905a3e3d45d05ac7
[3/3] ASoC: qcom: SC7280: Add machine driver
commit: 57350bd41c3ac01bcae1d94e2c85d47dd90b6a3f

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark