This patch adds device-tree bindings for the Imagis
IST3038C touch screen IC.
Signed-off-by: Markuss Broks <[email protected]>
---
.../input/touchscreen/imagis,ist3038c.yaml | 78 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000000..da1630eb957b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller bindings
+
+maintainers:
+ - Markuss Broks <[email protected]>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ items:
+ - enum:
+ - imagis,ist3038c
+
+ reg:
+ description: I2C address
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Power supply regulator for the chip
+
+ vddio-supply:
+ description: Power supply regulator for the I2C bus
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-fuzz-pressure: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@48 {
+ compatible = "imagis,ist3038c";
+ reg = <0x50>;
+ interrupt-parent = <&gpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ldo1_reg>;
+ vddio-supply = <&ldo2_reg>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ touchscreen-fuzz-x = <10>;
+ touchscreen-fuzz-y = <10>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index cdc851e275f1..9357cdc5aef5 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -551,6 +551,8 @@ patternProperties:
description: Ingenieurburo Fur Ic-Technologie (I/F/I)
"^ilitek,.*":
description: ILI Technology Corporation (ILITEK)
+ "^imagis,.*":
+ description: Imagis Technologies Co., Ltd.
"^img,.*":
description: Imagination Technologies Ltd.
"^imi,.*":
--
2.35.0
On Thu, 10 Feb 2022 18:37:06 +0200, Markuss Broks wrote:
> This patch adds device-tree bindings for the Imagis
> IST3038C touch screen IC.
>
> Signed-off-by: Markuss Broks <[email protected]>
> ---
> .../input/touchscreen/imagis,ist3038c.yaml | 78 +++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> 2 files changed, 80 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.example.dts:23.26-37.13: Warning (i2c_bus_reg): /example-0/i2c/touchscreen@48: I2C bus unit address format error, expected "50"
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1591241
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
Add support for Imagis touchscreens, used on various mobile
devices such as Samsung Galaxy J5 (2015), J3 (2015), J5 (2016).
v2: rebase on top of the correct tree
v3:
- prefix all defines as IST3038C
- use two tabs for all defines
- add missing <linux/regulator/consumer.h> header
- drop ADDR_LEN and DATA_LEN defines; use sizeof(reg_be) instead
- use __be32 type for reg_be
- add a comment about i2c read not being successful on first try
- use "ret" instead of "res" in read_reg function
- don't use the internal __cpu_to_be32 function, use cpu_to_be32 instead
- use "error" instead of "ret" in interrupt handler
- pass the slot state directly, without ternary operator
- drop the dev_err in init_input_dev function
- reorder the functions in _probe so that the chipid command is read as fast
as possible
- don't use imagis_start in probe
- initialize the irq after the chip is powered
- save the return value in imagis_resume
- drop WIDTH_MAJOR since only TOUCH_MAJOR is reported
- the "chip detected" message is now dev_dbg
- reorder headers so they are in alphabetic order
- use GENMASK to generate masks for getting the X and Y coordinates and touch area
- drop *_pressure from device tree bindings since the driver doesn't
support reporting pressure
- fix the typo with i2c address in device treee bindings (48 instead of 50)
- add IRQF_NO_AUTOEN flag to avoid unbalanced irq enable
Markuss Broks (2):
dt-bindings: input/touchscreen: bindings for Imagis
Input: add Imagis touchscreen driver
.../input/touchscreen/imagis,ist3038c.yaml | 78 +++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/imagis.c | 329 ++++++++++++++++++
6 files changed, 426 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
create mode 100644 drivers/input/touchscreen/imagis.c
--
2.35.0
This patch adds device-tree bindings for the Imagis
IST3038C touch screen IC.
Signed-off-by: Markuss Broks <[email protected]>
---
.../input/touchscreen/imagis,ist3038c.yaml | 75 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000000..7b127817e1f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller bindings
+
+maintainers:
+ - Markuss Broks <[email protected]>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ items:
+ - enum:
+ - imagis,ist3038c
+
+ reg:
+ description: I2C address
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Power supply regulator for the chip
+
+ vddio-supply:
+ description: Power supply regulator for the I2C bus
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@50 {
+ compatible = "imagis,ist3038c";
+ reg = <0x50>;
+ interrupt-parent = <&gpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ldo1_reg>;
+ vddio-supply = <&ldo2_reg>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ touchscreen-fuzz-x = <10>;
+ touchscreen-fuzz-y = <10>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index cdc851e275f1..9357cdc5aef5 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -551,6 +551,8 @@ patternProperties:
description: Ingenieurburo Fur Ic-Technologie (I/F/I)
"^ilitek,.*":
description: ILI Technology Corporation (ILITEK)
+ "^imagis,.*":
+ description: Imagis Technologies Co., Ltd.
"^img,.*":
description: Imagination Technologies Ltd.
"^imi,.*":
--
2.35.0
Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.
Signed-off-by: Markuss Broks <[email protected]>
---
MAINTAINERS | 6 +
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/imagis.c | 330 +++++++++++++++++++++++++++++
4 files changed, 347 insertions(+)
create mode 100644 drivers/input/touchscreen/imagis.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a899828a8d4e..f7f717ae926a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9405,6 +9405,12 @@ F: Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml
F: Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
F: drivers/iio/afe/iio-rescale.c
+IMAGIS TOUCHSCREEN DRIVER
+M: Markuss Broks <[email protected]>
+S: Maintained
+F: Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
+F: drivers/input/touchscreen/imagis.c
+
IKANOS/ADI EAGLE ADSL USB DRIVER
M: Matthieu Castet <[email protected]>
M: Stanislaw Gruszka <[email protected]>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 2f6adfb7b938..6810b4b094e8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1367,4 +1367,14 @@ config TOUCHSCREEN_ZINITIX
To compile this driver as a module, choose M here: the
module will be called zinitix.
+config TOUCHSCREEN_IMAGIS
+ tristate "Imagis touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have an Imagis IST30xxC touchscreen.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imagis.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 39a8127cf6a5..989bb1d563d3 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -115,3 +115,4 @@ obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o
+obj-$(CONFIG_TOUCHSCREEN_IMAGIS) += imagis.o
diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
new file mode 100644
index 000000000000..5e2f6425cde8
--- /dev/null
+++ b/drivers/input/touchscreen/imagis.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+#define IST3038C_HIB_ACCESS (0x800B << 16)
+#define IST3038C_DIRECT_ACCESS BIT(31)
+#define IST3038C_REG_CHIPID 0x40001000
+#define IST3038C_REG_HIB_BASE 0x30000100
+#define IST3038C_REG_TOUCH_STATUS (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS)
+#define IST3038C_REG_TOUCH_COORD (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8)
+#define IST3038C_REG_INTR_MESSAGE (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x4)
+#define IST3038C_WHOAMI 0x38c
+#define IST3038C_CHIP_ON_DELAY 60 // ms
+#define IST3038C_I2C_RETRY_COUNT 3
+#define IST3038C_MAX_SUPPORTED_FINGER_NUM 10
+#define IST3038C_X_MASK GENMASK(23, 12)
+#define IST3038C_X_SHIFT 12
+#define IST3038C_Y_MASK GENMASK(11, 0)
+#define IST3038C_AREA_MASK GENMASK(27, 24)
+#define IST3038C_AREA_SHIFT 24
+#define IST3038C_FINGER_COUNT_MASK GENMASK(15, 12)
+#define IST3038C_FINGER_COUNT_SHIFT 12
+#define IST3038C_FINGER_STATUS_MASK GENMASK(9, 0)
+
+struct imagis_ts {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+};
+
+static int imagis_i2c_read_reg(struct imagis_ts *ts,
+ unsigned int reg, unsigned int *buffer)
+{
+ __be32 reg_be = cpu_to_be32(reg);
+ struct i2c_msg msg[] = {
+ {
+ .addr = ts->client->addr,
+ .flags = 0,
+ .buf = (unsigned char *)®_be,
+ .len = sizeof(reg_be),
+ }, {
+ .addr = ts->client->addr,
+ .flags = I2C_M_RD,
+ .buf = (unsigned char *)buffer,
+ .len = sizeof(reg_be),
+ },
+ };
+ int ret, error;
+ int retry = IST3038C_I2C_RETRY_COUNT;
+
+ do { // The controller might need several reads until it returns a value
+ ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret == ARRAY_SIZE(msg)) {
+ *buffer = be32_to_cpu(*buffer);
+ return 0;
+ }
+
+ error = ret < 0 ? ret : -EIO;
+ dev_err(&ts->client->dev,
+ "%s - i2c_transfer failed: %d (%d)\n",
+ __func__, error, ret);
+ } while (--retry);
+
+ return error;
+}
+
+static irqreturn_t imagis_interrupt(int irq, void *dev_id)
+{
+ struct imagis_ts *ts = dev_id;
+ unsigned int finger_status, intr_message;
+ int error, i, finger_count, finger_pressed;
+
+ error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE, &intr_message);
+ if (error) {
+ dev_err(&ts->client->dev, "failed to read the interrupt message\n");
+ return IRQ_HANDLED;
+ }
+
+ finger_count = (intr_message & IST3038C_FINGER_COUNT_MASK) >> IST3038C_FINGER_COUNT_SHIFT;
+ finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK;
+ if (finger_count > IST3038C_MAX_SUPPORTED_FINGER_NUM) {
+ dev_err(&ts->client->dev, "finger count is more than maximum supported\n");
+ return IRQ_HANDLED;
+ }
+
+ for (i = 0; i < finger_count; i++) {
+ error = imagis_i2c_read_reg(ts, IST3038C_REG_TOUCH_COORD + (i * 4), &finger_status);
+ if (error) {
+ dev_err(&ts->client->dev, "failed to read coordinates for finger %d\n", i);
+ return IRQ_HANDLED;
+ }
+ input_mt_slot(ts->input_dev, i);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER,
+ finger_pressed & BIT(i));
+ touchscreen_report_pos(ts->input_dev, &ts->prop,
+ (finger_status & IST3038C_X_MASK) >> IST3038C_X_SHIFT,
+ finger_status & IST3038C_Y_MASK, 1);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR,
+ (finger_status & IST3038C_AREA_MASK) >> IST3038C_AREA_SHIFT);
+ }
+ input_mt_sync_frame(ts->input_dev);
+ input_sync(ts->input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int imagis_start(struct imagis_ts *ts)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to enable regulators: %d\n", error);
+ return error;
+ }
+
+ msleep(IST3038C_CHIP_ON_DELAY);
+
+ enable_irq(ts->client->irq);
+ return 0;
+}
+
+static int imagis_stop(struct imagis_ts *ts)
+{
+ int error = 0;
+
+ disable_irq(ts->client->irq);
+
+ error = regulator_bulk_disable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error)
+ dev_err(&ts->client->dev,
+ "Failed to disable regulators: %d\n", error);
+ return error;
+}
+
+static int imagis_input_open(struct input_dev *dev)
+{
+ struct imagis_ts *ts = input_get_drvdata(dev);
+
+ return imagis_start(ts);
+}
+
+static void imagis_input_close(struct input_dev *dev)
+{
+ struct imagis_ts *ts = input_get_drvdata(dev);
+
+ imagis_stop(ts);
+}
+
+static int imagis_init_input_dev(struct imagis_ts *ts)
+{
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(&ts->client->dev);
+ if (!input_dev)
+ return -ENOMEM;
+
+ ts->input_dev = input_dev;
+
+ input_dev->name = "Imagis capacitive touchscreen";
+ input_dev->phys = "input/ts";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = imagis_input_open;
+ input_dev->close = imagis_input_close;
+
+ input_set_drvdata(input_dev, ts);
+
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ touchscreen_parse_properties(input_dev, true, &ts->prop);
+ if (!ts->prop.max_x || !ts->prop.max_y) {
+ dev_err(&ts->client->dev,
+ "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+ return -EINVAL;
+ }
+
+ error = input_mt_init_slots(input_dev, IST3038C_MAX_SUPPORTED_FINGER_NUM,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to initialize MT slots: %d", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to register input device: %d", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int imagis_init_regulators(struct imagis_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ int error;
+
+ ts->supplies[0].supply = "vdd";
+ ts->supplies[1].supply = "vddio";
+ error = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error < 0) {
+ dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int imagis_probe(struct i2c_client *i2c)
+{
+ struct device *dev;
+ struct imagis_ts *ts;
+ int chip_id, ret;
+
+ dev = &i2c->dev;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = i2c;
+
+ ret = imagis_init_regulators(ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "regulator init error: %d\n", ret);
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable regulators: %d\n", ret);
+
+ msleep(IST3038C_CHIP_ON_DELAY);
+
+ ret = imagis_i2c_read_reg(ts, IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS, &chip_id);
+ if (ret)
+ return dev_err_probe(dev, ret, "chip ID read failure: %d\n", ret);
+
+ if (chip_id == IST3038C_WHOAMI)
+ dev_dbg(dev, "Detected IST3038C chip\n");
+ else
+ return dev_err_probe(dev, -EINVAL, "unknown chip ID: 0x%x\n", chip_id);
+
+ ret = devm_request_threaded_irq(dev, i2c->irq,
+ NULL, imagis_interrupt,
+ IRQF_ONESHOT | IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN,
+ "imagis-touchscreen", ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "IRQ allocation failure: %d\n", ret);
+
+ ret = imagis_init_input_dev(ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "input subsystem init error: %d\n", ret);
+
+ return 0;
+}
+
+static int __maybe_unused imagis_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct imagis_ts *ts = i2c_get_clientdata(client);
+
+ mutex_lock(&ts->input_dev->mutex);
+
+ if (input_device_enabled(ts->input_dev))
+ imagis_stop(ts);
+
+ mutex_unlock(&ts->input_dev->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused imagis_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct imagis_ts *ts = i2c_get_clientdata(client);
+ int ret = 0;
+
+ mutex_lock(&ts->input_dev->mutex);
+
+ if (input_device_enabled(ts->input_dev))
+ ret = imagis_start(ts);
+
+ mutex_unlock(&ts->input_dev->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id imagis_of_match[] = {
+ { .compatible = "imagis,ist3038c", },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, imagis_of_match);
+#endif
+
+static struct i2c_driver imagis_ts_driver = {
+ .driver = {
+ .name = "imagis-touchscreen",
+ .pm = &imagis_pm_ops,
+ .of_match_table = of_match_ptr(imagis_of_match),
+ },
+ .probe_new = imagis_probe,
+};
+
+module_i2c_driver(imagis_ts_driver);
+
+MODULE_DESCRIPTION("Imagis IST3038C Touchscreen Driver");
+MODULE_AUTHOR("Markuss Broks <[email protected]>");
+MODULE_LICENSE("GPL");
--
2.35.0