Clang build fails with
spi-sunplus-sp7021.c:405:2: error: variable 'ret' is used
uninitialized whenever switch default is taken
default:
simplify code
Restore initializing ret. and add return error at default
Fixes: 47e8fe57a66f ("spi: Modify irq request position and modify parameters")
Reported-by: Tom Rix <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Nathan Chancellor <[email protected]>
Reported-by: Mark Brown <[email protected]>
Signed-off-by: Li-hao Kuo <[email protected]>
---
drivers/spi/spi-sunplus-sp7021.c | 38 +++++++++-----------------------------
1 file changed, 9 insertions(+), 29 deletions(-)
diff --git a/drivers/spi/spi-sunplus-sp7021.c b/drivers/spi/spi-sunplus-sp7021.c
index ba5ed9f..ade7a0f 100644
--- a/drivers/spi/spi-sunplus-sp7021.c
+++ b/drivers/spi/spi-sunplus-sp7021.c
@@ -69,12 +69,6 @@
#define SP7021_SPI_DATA_SIZE (255)
#define SP7021_FIFO_DATA_LEN (16)
-enum SP_SPI_MODE {
- SP7021_SLAVE_READ = 0,
- SP7021_SLAVE_WRITE = 1,
- SP7021_SPI_IDLE = 2,
-};
-
enum {
SP7021_MASTER_MODE = 0,
SP7021_SLAVE_MODE = 1,
@@ -375,40 +369,26 @@ static int sp7021_spi_slave_transfer_one(struct spi_controller *ctlr, struct spi
{
struct sp7021_spi_ctlr *pspim = spi_master_get_devdata(ctlr);
struct device *dev = pspim->dev;
- int mode, ret;
+ int ret;
- mode = SP7021_SPI_IDLE;
- if (xfer->tx_buf && xfer->rx_buf) {
- dev_dbg(&ctlr->dev, "%s() wrong command\n", __func__);
- return -EINVAL;
- } else if (xfer->tx_buf) {
+ if (xfer->tx_buf && !xfer->rx_buf) {
xfer->tx_dma = dma_map_single(dev, (void *)xfer->tx_buf,
xfer->len, DMA_TO_DEVICE);
if (dma_mapping_error(dev, xfer->tx_dma))
return -ENOMEM;
- mode = SP7021_SLAVE_WRITE;
- } else if (xfer->rx_buf) {
+ ret = sp7021_spi_slave_tx(spi, xfer);
+ dma_unmap_single(dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE);
+ } else if (xfer->rx_buf && !xfer->tx_buf) {
xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, xfer->len,
DMA_FROM_DEVICE);
if (dma_mapping_error(dev, xfer->rx_dma))
return -ENOMEM;
- mode = SP7021_SLAVE_READ;
- }
-
- switch (mode) {
- case SP7021_SLAVE_WRITE:
- ret = sp7021_spi_slave_tx(spi, xfer);
- break;
- case SP7021_SLAVE_READ:
ret = sp7021_spi_slave_rx(spi, xfer);
- break;
- default:
- break;
- }
- if (xfer->tx_buf)
- dma_unmap_single(dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE);
- if (xfer->rx_buf)
dma_unmap_single(dev, xfer->rx_dma, xfer->len, DMA_FROM_DEVICE);
+ } else {
+ dev_dbg(&ctlr->dev, "%s() wrong command\n", __func__);
+ return -EINVAL;
+ }
spi_finalize_current_transfer(ctlr);
return ret;
--
2.7.4
On Mon, Feb 14, 2022 at 10:20:11AM +0800, Li-hao Kuo wrote:
> Clang build fails with
> spi-sunplus-sp7021.c:405:2: error: variable 'ret' is used
> uninitialized whenever switch default is taken
> default:
>
> simplify code
>
> Restore initializing ret. and add return error at default
This part of the commit message does not really match what the change
does anymore and I think that the "simplify code" part of the message
could be flushed out a little bit more, maybe something like:
"Hoist the calls to sp7021_spi_slave_tx() and sp7021_spi_slave_rx() into
the if statments and rewrite the if statements to explicitly allow only
unidirectional transfers."
?
> Fixes: 47e8fe57a66f ("spi: Modify irq request position and modify parameters")
> Reported-by: Tom Rix <[email protected]>
> Reported-by: kernel test robot <[email protected]>
> Reported-by: Nathan Chancellor <[email protected]>
> Reported-by: Mark Brown <[email protected]>
> Signed-off-by: Li-hao Kuo <[email protected]>
Regardless, the actual change itself looks fine. Feel free to carry
this tag on future revisions:
Reviewed-by: Nathan Chancellor <[email protected]>
> ---
> drivers/spi/spi-sunplus-sp7021.c | 38 +++++++++-----------------------------
> 1 file changed, 9 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/spi/spi-sunplus-sp7021.c b/drivers/spi/spi-sunplus-sp7021.c
> index ba5ed9f..ade7a0f 100644
> --- a/drivers/spi/spi-sunplus-sp7021.c
> +++ b/drivers/spi/spi-sunplus-sp7021.c
> @@ -69,12 +69,6 @@
> #define SP7021_SPI_DATA_SIZE (255)
> #define SP7021_FIFO_DATA_LEN (16)
>
> -enum SP_SPI_MODE {
> - SP7021_SLAVE_READ = 0,
> - SP7021_SLAVE_WRITE = 1,
> - SP7021_SPI_IDLE = 2,
> -};
> -
> enum {
> SP7021_MASTER_MODE = 0,
> SP7021_SLAVE_MODE = 1,
> @@ -375,40 +369,26 @@ static int sp7021_spi_slave_transfer_one(struct spi_controller *ctlr, struct spi
> {
> struct sp7021_spi_ctlr *pspim = spi_master_get_devdata(ctlr);
> struct device *dev = pspim->dev;
> - int mode, ret;
> + int ret;
>
> - mode = SP7021_SPI_IDLE;
> - if (xfer->tx_buf && xfer->rx_buf) {
> - dev_dbg(&ctlr->dev, "%s() wrong command\n", __func__);
> - return -EINVAL;
> - } else if (xfer->tx_buf) {
> + if (xfer->tx_buf && !xfer->rx_buf) {
> xfer->tx_dma = dma_map_single(dev, (void *)xfer->tx_buf,
> xfer->len, DMA_TO_DEVICE);
> if (dma_mapping_error(dev, xfer->tx_dma))
> return -ENOMEM;
> - mode = SP7021_SLAVE_WRITE;
> - } else if (xfer->rx_buf) {
> + ret = sp7021_spi_slave_tx(spi, xfer);
> + dma_unmap_single(dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE);
> + } else if (xfer->rx_buf && !xfer->tx_buf) {
> xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, xfer->len,
> DMA_FROM_DEVICE);
> if (dma_mapping_error(dev, xfer->rx_dma))
> return -ENOMEM;
> - mode = SP7021_SLAVE_READ;
> - }
> -
> - switch (mode) {
> - case SP7021_SLAVE_WRITE:
> - ret = sp7021_spi_slave_tx(spi, xfer);
> - break;
> - case SP7021_SLAVE_READ:
> ret = sp7021_spi_slave_rx(spi, xfer);
> - break;
> - default:
> - break;
> - }
> - if (xfer->tx_buf)
> - dma_unmap_single(dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE);
> - if (xfer->rx_buf)
> dma_unmap_single(dev, xfer->rx_dma, xfer->len, DMA_FROM_DEVICE);
> + } else {
> + dev_dbg(&ctlr->dev, "%s() wrong command\n", __func__);
> + return -EINVAL;
> + }
>
> spi_finalize_current_transfer(ctlr);
> return ret;
> --
> 2.7.4
>
On Mon, 14 Feb 2022 10:20:11 +0800, Li-hao Kuo wrote:
> Clang build fails with
> spi-sunplus-sp7021.c:405:2: error: variable 'ret' is used
> uninitialized whenever switch default is taken
> default:
>
> simplify code
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: Fix warning for Clang build and simplify code
commit: 5790597d7113faabb1714d3d1efa268e36eb4811
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark