2022-02-17 23:11:43

by Pratyush Yadav

Subject: [PATCH 1/2] arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes

The OSPI flash nodes are missing a space before the opening brace. Fix
that.

Signed-off-by: Pratyush Yadav <[email protected]>
---

Only compile-tested.

arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +-
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index e94ae178b1ae..edf80e277267 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -498,7 +498,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;

- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index a9785bec12df..30b956276060 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -369,7 +369,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;

- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 34724440171a..7d819f0db8df 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -256,7 +256,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;

- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2d7596911b27..2ecc4541f6d8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -482,7 +482,7 @@ &ospi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;

- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 2fee2906183d..990dfcd61018 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -171,7 +171,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;

- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
--
2.34.1

2022-02-22 17:31:26

by Apurva Nandan

Subject: Re: [PATCH 1/2] arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes

On 17/02/22 23:40, Pratyush Yadav wrote:
> The OSPI flash nodes are missing a space before the opening brace. Fix
> that.
>
> Signed-off-by: Pratyush Yadav <[email protected]>

Reviewed-by: Apurva Nandan<[email protected]>

> ---
>
> Only compile-tested.
>
> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +-
> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 2 +-
> arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 2 +-
> arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
> arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
> 5 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index e94ae178b1ae..edf80e277267 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -498,7 +498,7 @@ &ospi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&ospi0_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index a9785bec12df..30b956276060 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -369,7 +369,7 @@ &ospi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&ospi0_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> index 34724440171a..7d819f0db8df 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> @@ -256,7 +256,7 @@ &ospi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index 2d7596911b27..2ecc4541f6d8 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -482,7 +482,7 @@ &ospi1 {
> pinctrl-names = "default";
> pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <1>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> index 2fee2906183d..990dfcd61018 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> @@ -171,7 +171,7 @@ &ospi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> --
> 2.34.1
>

2022-02-23 02:29:46

by Nishanth Menon

Subject: Re: [PATCH 1/2] arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes

Hi Pratyush Yadav,

On Thu, 17 Feb 2022 23:40:24 +0530, Pratyush Yadav wrote:
> The OSPI flash nodes are missing a space before the opening brace. Fix
> that.
>
>

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/2] arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes
commit: 672e89d731c46b1f4118a070366dc117afed0f7c
[2/2] arm64: dts: ti: k3-*: Drop address and size cells from flash nodes
commit: cd9342109a7a901a115227978b86a3db6ee3d7a9

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D