This patch set is to add bolero digital macros, WCD and maxim codecs nodes
for audio on sc7280 based platforms.
This patch set depends on:
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=631506
-- https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/.
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=601249
-- Clock reset control patches
Changes Since V6:
-- Modify link-names and audio routing in a sound node.
-- Move amp_en pin control node to appropriate consumer patch.
-- Split patches as per digital macro codecs and board specific codecs and sort it.
-- Modify label and node names to lpass specific.
Changes Since V5:
-- Move soc specific bolero digital codec nodes to soc specific file.
-- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
-- Change node name and remove redundant status property in sound node.
Changes Since V4:
-- Update nodes in sorting order.
-- Update DTS node names as per dt-bindings.
-- Update Node properties in proper order.
-- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
-- Remove redundant labels.
-- Remove unused size cells and address cells in tx macro node.
-- Keep all same nodes at one place, which are defined in same file.
-- Add max98360a codec node to herobrine board specific targets.
Changes Since V3:
-- Move digital codec macro nodes to board specific dtsi file.
-- Update pin controls in lpass cpu node.
-- Update dependency patch list.
-- Create patches on latest kernel.
Changes Since V2:
-- Add power domains to digital codec macro nodes.
-- Change clock node usage in lpass cpu node.
-- Add codec mem clock to lpass cpu node.
-- Modify the node names to be generic.
-- Move sound and codec nodes to root node.
-- sort dai links as per reg.
-- Fix typo errors.
Changes Since V1:
-- Update the commit message of cpu node patch.
-- Add gpio control property to support Euro headset in wcd938x node.
-- Fix clock properties in lpass cpu and digital codec macro node.
Srinivasa Rao Mandadapu (4):
arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
macro codecs
arm64: dts: qcom: sc7280: Add nodes for wcd9385 and max98360a codec
arm64: dts: qcom: sc7280: Add lpass cpu node
arm64: dts: qcom: sc7280: Add dt nodes for sound card
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 29 ++++
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 215 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 184 +++++++++++++++++++++
4 files changed, 436 insertions(+)
--
2.7.4
SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
external codecs using soundwire masters. Add these nodes for sc7280 based
platforms audio use case.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 122 +++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 50fea0e..c0f127f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1980,6 +1980,128 @@
#clock-cells = <1>;
};
+ lpass_rx_macro: codec@3200000 {
+ compatible = "qcom,sc7280-lpass-rx-macro";
+ reg = <0 0x03200000 0 0x1000>;
+
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_rx_swr>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&lpass_va_macro>;
+ clock-names = "mclk", "npl", "fsgen";
+
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+ <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ power-domain-names ="macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ swr0: soundwire@3210000 {
+ compatible = "qcom,soundwire-v1.6.0";
+ reg = <0 0x03210000 0 0x2000>;
+
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_rx_macro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <0>;
+ qcom,dout-ports = <5>;
+
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+ reset-names = "swr_audio_cgcr";
+
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+ qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ lpass_tx_macro: codec@3220000 {
+ compatible = "qcom,sc7280-lpass-tx-macro";
+ reg = <0 0x03220000 0 0x1000>;
+
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_tx_swr>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&lpass_va_macro>;
+ clock-names = "mclk", "npl", "fsgen";
+
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+ <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ power-domain-names ="macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ swr1: soundwire@3230000 {
+ compatible = "qcom,soundwire-v1.6.0";
+ reg = <0 0x03230000 0 0x2000>;
+
+ interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "swr_master_irq", "swr_wake_irq";
+ clocks = <&lpass_tx_macro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <3>;
+ qcom,dout-ports = <0>;
+
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+ reset-names = "swr_audio_cgcr";
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>;
+ qcom,port-offset = <1>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ lpass_va_macro: codec@3370000 {
+ compatible = "qcom,sc7280-lpass-va-macro";
+ reg = <0 0x03370000 0 0x1000>;
+
+ status = "disabled";
+ pinctrl-0 = <&lpass_dmic01>;
+ pinctrl-names = "default";
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
+ clock-names = "mclk";
+
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+ <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ power-domain-names ="macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
lpass_ag_noc: interconnect@3c40000 {
reg = <0 0x03c40000 0 0xf080>;
compatible = "qcom,sc7280-lpass-ag-noc";
--
2.7.4
Add lpass cpu node for audio on sc7280 based platforms.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 +++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 62 ++++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 6004c08..cf62d06 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -273,6 +273,34 @@
modem-init;
};
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
+
&lpass_rx_macro {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index c0f127f..69cb78f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -19,6 +19,7 @@
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -2102,6 +2103,67 @@
#sound-dai-cells = <1>;
};
+ lpass_cpu: audio@3987000 {
+ compatible = "qcom,sc7280-lpass-cpu";
+
+ reg = <0 0x03987000 0 0x68000>,
+ <0 0x03b00000 0 0x29000>,
+ <0 0x03260000 0 0xc000>,
+ <0 0x03280000 0 0x29000>,
+ <0 0x03340000 0 0x29000>,
+ <0 0x0336c000 0 0x3000>;
+ reg-names = "lpass-hdmiif",
+ "lpass-lpaif",
+ "lpass-rxtx-cdc-dma-lpm",
+ "lpass-rxtx-lpaif",
+ "lpass-va-lpaif",
+ "lpass-va-cdc-dma-lpm";
+
+ iommus = <&apps_smmu 0x1820 0>,
+ <&apps_smmu 0x1821 0>,
+ <&apps_smmu 0x1832 0>;
+
+ power-domains = <&rpmhpd SC7280_LCX>;
+ power-domain-names = "lcx";
+ required-opps = <&rpmhpd_opp_nom>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_EXT_MCLK0_CLK>,
+ <&lpasscore LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+ <&lpasscore LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+ <&lpasscore LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+ <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+ clock-names = "aon_cc_audio_hm_h",
+ "audio_cc_ext_mclk0",
+ "core_cc_sysnoc_mport_core",
+ "core_cc_ext_if0_ibit",
+ "core_cc_ext_if1_ibit",
+ "audio_cc_codec_mem",
+ "audio_cc_codec_mem0",
+ "audio_cc_codec_mem1",
+ "audio_cc_codec_mem2",
+ "aon_cc_va_mem0";
+
+ #sound-dai-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif",
+ "lpass-irq-hdmi",
+ "lpass-irq-vaif",
+ "lpass-irq-rxtxif";
+
+ status = "disabled";
+ };
+
lpass_ag_noc: interconnect@3c40000 {
reg = <0 0x03c40000 0 0xf080>;
compatible = "qcom,sc7280-lpass-ag-noc";
--
2.7.4
Add dt nodes for sound card support, which is using WCD938x headset
playback, capture, I2S speaker playback and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 23 ++++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
2 files changed, 116 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index b944366..1e16854 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -90,6 +90,29 @@ ap_ts_pen_1v8: &i2c13 {
us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
};
+&sound {
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
&tlmm {
tp_int_odl: tp-int-odl {
pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index cf62d06..a7c884a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -84,6 +84,99 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
+
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@1 {
+ link-name = "MAX98360A";
+ reg = <MI2S_SECONDARY>;
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@5 {
+ link-name = "DisplayPort";
+ reg = <LPASS_DP_RX>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@6 {
+ link-name = "WCD9385 Playback";
+ reg = <LPASS_CDC_DMA_RX0>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@19 {
+ link-name = "WCD9385 Capture";
+ reg = <LPASS_CDC_DMA_TX3>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@25 {
+ link-name = "DMIC";
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
};
&apps_rsc {
--
2.7.4
Quoting Srinivasa Rao Mandadapu (2022-04-13 08:21:16)
> Add lpass cpu node for audio on sc7280 based platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
Reviewed-by: Stephen Boyd <[email protected]>