Add device managed action to sync pending queue work, otherwise
the queued work may run after the work is destroyed.
Signed-off-by: Li Jun <[email protected]>
---
- new patch
drivers/extcon/extcon-ptn5150.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 5b9a3cf8df26..2a7874108df8 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -194,6 +194,13 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
return 0;
}
+static void ptn5150_work_sync_and_put(void *data)
+{
+ struct ptn5150_info *info = data;
+
+ cancel_work_sync(&info->irq_work);
+}
+
static int ptn5150_i2c_probe(struct i2c_client *i2c)
{
struct device *dev = &i2c->dev;
@@ -284,6 +291,10 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
if (ret)
return -EINVAL;
+ ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
+ if (ret)
+ return ret;
+
/*
* Update current extcon state if for example OTG connection was there
* before the probe
--
2.25.1