Satya Priya (9):
dt-bindings: mfd: pm8008: Add reset-gpios
dt-bindings: mfd: pm8008: Change the address cells
dt-bindings: mfd: pm8008: Add regulators for pm8008
mfd: pm8008: Add reset-gpios
mfd: pm8008: Remove the regmap member from pm8008_data struct
mfd: pm8008: Use i2c_new_dummy_device() API
regulator: Add a regulator driver for the PM8008 PMIC
arm64: dts: qcom: pm8008: Add base dts file
arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp
.../devicetree/bindings/mfd/qcom,pm8008.yaml | 69 ++++++-
arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 ++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 +++++++
drivers/mfd/qcom-pm8008.c | 57 ++++--
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom-pm8008-regulator.c | 216 +++++++++++++++++++++
include/linux/mfd/qcom_pm8008.h | 8 +
8 files changed, 462 insertions(+), 18 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
create mode 100644 drivers/regulator/qcom-pm8008-regulator.c
create mode 100644 include/linux/mfd/qcom_pm8008.h
--
2.7.4