The SSI and SPDIF has dual fifos, enhance P2P for these
case with using the sdma_peripheral_config struct
Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/fsl/fsl_asrc_dma.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 5038faf035cb..aaf7993935b7 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -129,6 +129,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
struct snd_pcm_hw_params *params)
{
enum dma_slave_buswidth buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ enum sdma_peripheral_type be_peripheral_type = IMX_DMATYPE_SSI;
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
struct snd_dmaengine_dai_dma_data *dma_params_fe = NULL;
@@ -139,6 +140,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
struct snd_soc_component *component_be = NULL;
struct fsl_asrc *asrc = pair->asrc;
struct dma_slave_config config_fe, config_be;
+ struct sdma_peripheral_config audio_config;
enum asrc_pair_index index = pair->index;
struct device *dev = component->dev;
struct device_node *of_dma_node;
@@ -221,6 +223,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
/* Get DMA request of Back-End */
tmp_data = tmp_chan->private;
pair->dma_data.dma_request = tmp_data->dma_request;
+ be_peripheral_type = tmp_data->peripheral_type;
if (!be_chan)
dma_release_channel(tmp_chan);
@@ -268,6 +271,17 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
config_be.dst_addr_width = buswidth;
config_be.dst_maxburst = dma_params_be->maxburst;
+ memset(&audio_config, 0, sizeof(audio_config));
+ config_be.peripheral_config = &audio_config;
+ config_be.peripheral_size = sizeof(audio_config);
+
+ if (tx && (be_peripheral_type == IMX_DMATYPE_SSI_DUAL ||
+ be_peripheral_type == IMX_DMATYPE_SPDIF))
+ audio_config.n_fifos_dst = 2;
+ if (!tx && (be_peripheral_type == IMX_DMATYPE_SSI_DUAL ||
+ be_peripheral_type == IMX_DMATYPE_SPDIF))
+ audio_config.n_fifos_src = 2;
+
if (tx) {
config_be.src_addr = asrc->paddr + asrc->get_fifo_addr(OUT, index);
config_be.dst_addr = dma_params_be->addr;
--
2.17.1
On Fri, 20 May 2022 11:06:00 +0800, Shengjiu Wang wrote:
> The SSI and SPDIF has dual fifos, enhance P2P for these
> case with using the sdma_peripheral_config struct
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: fsl_asrc_dma: enable dual fifo for ASRC P2P
commit: 6398b004cfcce38626f3ba6fa5853177a3501aae
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark