This series contains 2 small fixes around the AAD part of DA7219, particularly
in relation to jack pole detection on certain active headsets, and tidy up
when a jack is removed.
Adam Thomson (2):
ASoC: da7219: Fix pole orientation detection on certain headsets
ASoC: da7219: cancel AAD related work earlier for jack removal
sound/soc/codecs/da7219-aad.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--
2.17.1
To avoid the unlikely possibility of register misalignment for
headphones being ungrounded/driven after a jack has been removed,
move the cancel_work_sync() call to the start of the jack removal
handling in the IRQ thread.
Signed-off-by: Adam Thomson <[email protected]>
---
sound/soc/codecs/da7219-aad.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index e7d8c33e02cc..bba73c44c219 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -434,6 +434,10 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data)
mask |= DA7219_AAD_REPORT_ALL_MASK;
da7219_aad->jack_inserted = false;
+ /* Cancel any pending work */
+ cancel_work_sync(&da7219_aad->btn_det_work);
+ cancel_work_sync(&da7219_aad->hptest_work);
+
/* Un-drive headphones/lineout */
snd_soc_component_update_bits(component, DA7219_HP_R_CTRL,
DA7219_HP_R_AMP_OE_MASK, 0);
@@ -452,10 +456,6 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data)
/* Enable ground switch */
snd_soc_component_update_bits(component, 0xFB, 0x01, 0x01);
-
- /* Cancel any pending work */
- cancel_work_sync(&da7219_aad->btn_det_work);
- cancel_work_sync(&da7219_aad->hptest_work);
}
}
--
2.17.1
It has been recently found that certain 'active' headsets can
be mis-detected as OMTP instead of CTIA, causing obvious issus
with audio quality. This relates to increased resistances which
negatively impacts the pole detection circuitry within the device.
To counter this, ground switches on both headphone channels are
available to enable/disable and these allow for the detection
process to operate as intended, even with active headsets. This
commit adds control of the ground switches to the AAD logic.
Signed-off-by: Adam Thomson <[email protected]>
---
sound/soc/codecs/da7219-aad.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index 7998fdd3b378..e7d8c33e02cc 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -60,6 +60,9 @@ static void da7219_aad_btn_det_work(struct work_struct *work)
bool micbias_up = false;
int retries = 0;
+ /* Disable ground switch */
+ snd_soc_component_update_bits(component, 0xFB, 0x01, 0x00);
+
/* Drive headphones/lineout */
snd_soc_component_update_bits(component, DA7219_HP_L_CTRL,
DA7219_HP_L_AMP_OE_MASK,
@@ -153,6 +156,9 @@ static void da7219_aad_hptest_work(struct work_struct *work)
tonegen_freq_hptest = cpu_to_le16(DA7219_AAD_HPTEST_RAMP_FREQ_INT_OSC);
}
+ /* Disable ground switch */
+ snd_soc_component_update_bits(component, 0xFB, 0x01, 0x00);
+
/* Ensure gain ramping at fastest rate */
gain_ramp_ctrl = snd_soc_component_read(component, DA7219_GAIN_RAMP_CTRL);
snd_soc_component_write(component, DA7219_GAIN_RAMP_CTRL, DA7219_GAIN_RAMP_RATE_X8);
@@ -444,6 +450,9 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data)
snd_soc_dapm_disable_pin(dapm, "Mic Bias");
snd_soc_dapm_sync(dapm);
+ /* Enable ground switch */
+ snd_soc_component_update_bits(component, 0xFB, 0x01, 0x01);
+
/* Cancel any pending work */
cancel_work_sync(&da7219_aad->btn_det_work);
cancel_work_sync(&da7219_aad->hptest_work);
@@ -899,6 +908,9 @@ int da7219_aad_init(struct snd_soc_component *component)
snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_1,
DA7219_BUTTON_CONFIG_MASK, 0);
+ /* Enable ground switch */
+ snd_soc_component_update_bits(component, 0xFB, 0x01, 0x01);
+
INIT_WORK(&da7219_aad->btn_det_work, da7219_aad_btn_det_work);
INIT_WORK(&da7219_aad->hptest_work, da7219_aad_hptest_work);
--
2.17.1
On Mon, 30 May 2022 13:22:21 +0000, Adam Thomson wrote:
> This series contains 2 small fixes around the AAD part of DA7219, particularly
> in relation to jack pole detection on certain active headsets, and tidy up
> when a jack is removed.
>
> Adam Thomson (2):
> ASoC: da7219: Fix pole orientation detection on certain headsets
> ASoC: da7219: cancel AAD related work earlier for jack removal
>
> [...]
Applied to
broonie/sound.git for-linus
Thanks!
[1/2] ASoC: da7219: Fix pole orientation detection on certain headsets
commit: 06f5882122e3faa183d76c4ec2c92f4c38e2c7bb
[2/2] ASoC: da7219: cancel AAD related work earlier for jack removal
commit: 2d969e8f35b1849a43156029a7a6e2943b89d0c0
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark