Add Machine driver support for audioreach solution, which uses
ADSP in SC7280 based paltforms.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
---
Changes Since V1:
-- Remove audioreach compatible name.
-- Remove dt-binding patch.
sound/soc/qcom/sc7280.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/sound/soc/qcom/sc7280.c b/sound/soc/qcom/sc7280.c
index 34cdb99..da7469a 100644
--- a/sound/soc/qcom/sc7280.c
+++ b/sound/soc/qcom/sc7280.c
@@ -19,9 +19,11 @@
#include "../codecs/rt5682s.h"
#include "common.h"
#include "lpass.h"
+#include "qdsp6/q6afe.h"
#define DEFAULT_MCLK_RATE 19200000
#define RT5682_PLL_FREQ (48000 * 512)
+#define MI2S_BCLK_RATE 1536000
struct sc7280_snd_data {
struct snd_soc_card card;
@@ -79,6 +81,7 @@ static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
case MI2S_PRIMARY:
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_TX3:
+ case TX_CODEC_DMA_TX_3:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
rval = snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
if (rval != 0 && rval != -ENOTSUPP) {
@@ -164,10 +167,14 @@ static int sc7280_init(struct snd_soc_pcm_runtime *rtd)
switch (cpu_dai->id) {
case MI2S_PRIMARY:
case LPASS_CDC_DMA_TX3:
+ case TX_CODEC_DMA_TX_3:
return sc7280_headset_init(rtd);
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_VA_TX0:
case MI2S_SECONDARY:
+ case RX_CODEC_DMA_RX_0:
+ case SECONDARY_MI2S_RX:
+ case VA_CODEC_DMA_TX_0:
return 0;
case LPASS_DP_RX:
return sc7280_hdmi_init(rtd);
@@ -195,6 +202,10 @@ static int sc7280_snd_hw_params(struct snd_pcm_substream *substream,
switch (cpu_dai->id) {
case LPASS_CDC_DMA_TX3:
case LPASS_CDC_DMA_RX0:
+ case RX_CODEC_DMA_RX_0:
+ case SECONDARY_MI2S_RX:
+ case TX_CODEC_DMA_TX_3:
+ case VA_CODEC_DMA_TX_0:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream);
if (sruntime != ERR_PTR(-ENOTSUPP))
@@ -245,6 +256,9 @@ static int sc7280_snd_prepare(struct snd_pcm_substream *substream)
switch (cpu_dai->id) {
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_TX3:
+ case RX_CODEC_DMA_RX_0:
+ case TX_CODEC_DMA_TX_3:
+ case VA_CODEC_DMA_TX_0:
return sc7280_snd_swr_prepare(substream);
default:
break;
@@ -263,6 +277,9 @@ static int sc7280_snd_hw_free(struct snd_pcm_substream *substream)
switch (cpu_dai->id) {
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_TX3:
+ case RX_CODEC_DMA_RX_0:
+ case TX_CODEC_DMA_TX_3:
+ case VA_CODEC_DMA_TX_0:
if (sruntime && data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
@@ -291,6 +308,10 @@ static void sc7280_snd_shutdown(struct snd_pcm_substream *substream)
SNDRV_PCM_STREAM_PLAYBACK);
}
break;
+ case SECONDARY_MI2S_RX:
+ snd_soc_dai_set_sysclk(cpu_dai, Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT,
+ 0, SNDRV_PCM_STREAM_PLAYBACK);
+ break;
default:
break;
}
@@ -298,14 +319,26 @@ static void sc7280_snd_shutdown(struct snd_pcm_substream *substream)
static int sc7280_snd_startup(struct snd_pcm_substream *substream)
{
+ unsigned int fmt = SND_SOC_DAIFMT_CBS_CFS;
+ unsigned int codec_dai_fmt = SND_SOC_DAIFMT_CBS_CFS;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
int ret = 0;
switch (cpu_dai->id) {
case MI2S_PRIMARY:
ret = sc7280_rt5682_init(rtd);
break;
+ case SECONDARY_MI2S_RX:
+ codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+
+ snd_soc_dai_set_sysclk(cpu_dai, Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT,
+ MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+
+ snd_soc_dai_set_fmt(cpu_dai, fmt);
+ snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+ break;
default:
break;
}
--
2.7.4
On Mon, 27 Jun 2022 16:14:22 +0530, Srinivasa Rao Mandadapu wrote:
> Add Machine driver support for audioreach solution, which uses
> ADSP in SC7280 based paltforms.
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: qcom: Add driver support for audioreach solution
commit: 5f78e1fb7a3ed1acc355145536ddd54f183b635d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark