Add proxy interconnect bandwidth votes during modem bootup on SC7280 SoCs.
V5:
* Improve phandle-array schemas [Stephen/Rob/Krzysztof]
* Add more details to the firmware-name/memory region string array [Stephen/Rob]
* Drop 'items' from label [Rob]
* Drop the patch 1 since Bjorn picked it up
V4:
* Remove older bindings [Matthias/Krzysztof]
* Convert sc7180/sc7280 to yaml and leave the rest to Sireesh's series
* Rebased on v2 of Krzysztof's bindings cleanups
* Misc. Fixes [Krzysztof]
V3:
* Re-ordered clock list, fixed pdc_sync typo [Rob/Matthias]
V2:
* Dropped patch 3 from version 1 [Sub with Bjorn's patch]
* Add YAML support [Krzysztof]
* Drop interconnect names [Bjorn]
Depends on Krzysztof's remoteproc cleanups and improvements:
https://patchwork.kernel.org/project/linux-arm-msm/cover/[email protected]/
Sibi Sankar (2):
dt-bindings: remoteproc: qcom: Convert SC7280 MSS bindings to YAML
dt-bindings: remoteproc: qcom: Convert SC7180 MSS bindings to YAML
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 47 +---
.../bindings/remoteproc/qcom,sc7180-mss-pil.yaml | 245 +++++++++++++++++++
.../bindings/remoteproc/qcom,sc7280-mss-pil.yaml | 266 +++++++++++++++++++++
3 files changed, 513 insertions(+), 45 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
--
2.7.4
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7280 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <[email protected]>
---
Depends on Krzysztof's remoteproc cleanups and improvements:
https://patchwork.kernel.org/project/linux-arm-msm/cover/[email protected]/
Previous discussions on PAS vs non-PAS bindings:
https://lore.kernel.org/lkml/YUps1JfGtf6JdbCx@ripper/ [Bjorn]
https://lore.kernel.org/lkml/CAE-0n51KBYjZvwGNy06_okmEWjEfRLQO54CYaY6-JnbBk6kOhA@mail.gmail.com/ [Stephen]
v5:
* Improve phandle-array schemas [Stephen/Rob/Krzysztof]
* Add more details to the firmware-name/memory region string array [Stephen/Rob]
* Drop 'items' from label [Rob]
v4:
* Remove older bindings [Matthias/Krzysztof]
* Misc. Fixes [Krzysztof]
* Rebased on v2 of Krzysztof's bindings cleanups
v3:
* Re-ordered clock list, fixed pdc_sync typo [Rob/Matthias]
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 31 +--
.../bindings/remoteproc/qcom,sc7280-mss-pil.yaml | 266 +++++++++++++++++++++
2 files changed, 268 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index b677900b3aae..1ec9093c3a82 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -15,7 +15,6 @@ on the Qualcomm Hexagon core.
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
"qcom,sc7180-mss-pil"
- "qcom,sc7280-mss-pil"
"qcom,sdm845-mss-pil"
- reg:
@@ -48,7 +47,6 @@ on the Qualcomm Hexagon core.
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
qcom,sc7180-mss-pil:
- qcom,sc7280-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -89,8 +87,6 @@ on the Qualcomm Hexagon core.
qcom,sc7180-mss-pil:
must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
"nav"
- qcom,sc7280-mss-pil:
- must be "iface", "xo", "snoc_axi", "offline", "pka"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -102,7 +98,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SC7180, SC7280, SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs
- reset-names:
Usage: required
@@ -111,7 +107,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SC7180, SC7280, SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs
For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
should be referenced as follows:
@@ -178,8 +174,6 @@ For the compatible string below the following supplies are required:
must be "cx", "mx"
qcom,sc7180-mss-pil:
must be "cx", "mx", "mss"
- qcom,sc7280-mss-pil:
- must be "cx", "mss"
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss"
@@ -205,9 +199,6 @@ For the compatible string below the following supplies are required:
Definition: a phandle reference to a syscon representing TCSR followed
by the three offsets within syscon for q6, modem and nc
halt registers.
- a phandle reference to a syscon representing TCSR followed
- by the four offsets within syscon for q6, modem, nc and vq6
- halt registers on SC7280 SoCs.
For the compatible strings below the following phandle references are required:
"qcom,sc7180-mss-pil"
@@ -218,24 +209,6 @@ For the compatible strings below the following phandle references are required:
by the offset within syscon for conn_box_spare0 register
used by the modem sub-system running on SC7180 SoC.
-For the compatible strings below the following phandle references are required:
- "qcom,sc7280-mss-pil"
-- qcom,ext-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: two phandle references to syscons representing TCSR_REG and
- TCSR register space followed by the two offsets within the syscon
- to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
- registers respectively.
-
-- qcom,qaccept-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a phandle reference to a syscon representing TCSR followed
- by the three offsets within syscon for mdm, cx and axi
- qaccept registers used by the modem sub-system running on
- SC7280 SoC.
-
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
on platforms which do not have TrustZone.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
new file mode 100644
index 000000000000..da1a5de3d38b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 MSS Peripheral Image Loader
+
+maintainers:
+ - Sibi Sankar <[email protected]>
+
+description:
+ This document describes the hardware for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-mss-pil
+
+ reg:
+ items:
+ - description: MSS QDSP6 registers
+ - description: RMB registers
+
+ reg-names:
+ items:
+ - const: qdsp6
+ - const: rmb
+
+ iommus:
+ items:
+ - description: MSA Stream 1
+ - description: MSA Stream 2
+
+ interconnects:
+ items:
+ - description: Path leading to system memory
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ clocks:
+ items:
+ - description: GCC MSS IFACE clock
+ - description: GCC MSS OFFLINE clock
+ - description: GCC MSS SNOC_AXI clock
+ - description: RPMH PKA clock
+ - description: RPMH XO clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: offline
+ - const: snoc_axi
+ - const: pka
+ - const: xo
+
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MSS power domain
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mss
+
+ resets:
+ items:
+ - description: AOSS restart
+ - description: PDC reset
+
+ reset-names:
+ items:
+ - const: mss_restart
+ - const: pdc_reset
+
+ memory-region:
+ items:
+ - description: MBA reserved region
+ - description: modem reserved region
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ - description: Name of MBA firmware
+ - description: Name of modem firmware
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Halt registers are used to halt transactions of various sub-components
+ within MSS.
+ items:
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the Q6 halt register
+ - description: offset to the modem halt register
+ - description: offset to the nc halt register
+ - description: offset to the vq6 halt register
+
+ qcom,ext-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: EXT registers are used for various power related functionality
+ items:
+ - items:
+ - description: phandle to TCSR_REG registers
+ - description: offset to the force_clk_en register
+ - description: offset to the rscc_disable register
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the axim1_clk_off register
+ - description: offset to the crypto_clk_off register
+
+ qcom,qaccept-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: QACCEPT registers are used to bring up/down Q-channels
+ items:
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the mdm qaccept register
+ - description: offset to the cx qaccept register
+ - description: offset to the axi qaccept register
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ const: stop
+
+ glink-edge:
+ $ref: qcom,glink-edge.yaml#
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the DSP.
+
+ properties:
+ interrupts:
+ items:
+ - description: IRQ from MSS to GLINK
+
+ mboxes:
+ items:
+ - description: Mailbox for communication between APPS and MSS
+
+ label:
+ const: modem
+
+ apr: false
+ fastrpc: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - iommus
+ - interconnects
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - qcom,ext-regs
+ - qcom,qaccept-regs
+ - memory-region
+ - qcom,qmp
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - glink-edge
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,sc7280.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sc7280-mss-pil";
+ reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+ reg-names = "qdsp6", "rmb";
+
+ iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+
+ interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&rpmhcc RPMH_PKA_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MSS>;
+ power-domain-names = "cx", "mss";
+
+ memory-region = <&mba_mem>, <&mpss_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+ <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+ qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
+ qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ };
+ };
--
2.7.4
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7180 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <[email protected]>
---
Depends on Krzysztof's remoteproc cleanups and improvements:
https://patchwork.kernel.org/project/linux-arm-msm/cover/[email protected]/
Previous discussion on PAS vs non-PAS bindings:
https://lore.kernel.org/lkml/YUps1JfGtf6JdbCx@ripper/ [Bjorn]
https://lore.kernel.org/lkml/CAE-0n51KBYjZvwGNy06_okmEWjEfRLQO54CYaY6-JnbBk6kOhA@mail.gmail.com/ [Stephen]
v5:
* Improve phandle-array schemas [Stephen/Rob/Krzysztof]
* Add more details to the firmware-name/memory region string array [Stephen/Rob]
* Drop 'items' from label [Rob]
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 20 +-
.../bindings/remoteproc/qcom,sc7180-mss-pil.yaml | 245 +++++++++++++++++++++
2 files changed, 247 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 1ec9093c3a82..1a691c1435f3 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -14,7 +14,6 @@ on the Qualcomm Hexagon core.
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
- "qcom,sc7180-mss-pil"
"qcom,sdm845-mss-pil"
- reg:
@@ -46,7 +45,6 @@ on the Qualcomm Hexagon core.
must be "wdog", "fatal", "ready", "handover", "stop-ack"
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
- qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -84,9 +82,6 @@ on the Qualcomm Hexagon core.
qcom,msm8998-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "qdss"
- qcom,sc7180-mss-pil:
- must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
- "nav"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -98,7 +93,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SC7180, SDM845 SoCs
+ sub-system on SDM845 SoCs
- reset-names:
Usage: required
@@ -107,7 +102,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SC7180, SDM845 SoCs
+ sub-system on SDM845 SoCs
For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
should be referenced as follows:
@@ -172,8 +167,6 @@ For the compatible string below the following supplies are required:
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
must be "cx", "mx"
- qcom,sc7180-mss-pil:
- must be "cx", "mx", "mss"
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss"
@@ -200,15 +193,6 @@ For the compatible string below the following supplies are required:
by the three offsets within syscon for q6, modem and nc
halt registers.
-For the compatible strings below the following phandle references are required:
- "qcom,sc7180-mss-pil"
-- qcom,spare-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a phandle reference to a syscon representing TCSR followed
- by the offset within syscon for conn_box_spare0 register
- used by the modem sub-system running on SC7180 SoC.
-
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
on platforms which do not have TrustZone.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
new file mode 100644
index 000000000000..e76c861165dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 MSS Peripheral Image Loader
+
+maintainers:
+ - Sibi Sankar <[email protected]>
+
+description:
+ This document describes the hardware for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7180-mss-pil
+
+ reg:
+ items:
+ - description: MSS QDSP6 registers
+ - description: RMB registers
+
+ reg-names:
+ items:
+ - const: qdsp6
+ - const: rmb
+
+ iommus:
+ items:
+ - description: MSA Stream 1
+ - description: MSA Stream 2
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ clocks:
+ items:
+ - description: GCC MSS IFACE clock
+ - description: GCC MSS BUS clock
+ - description: GCC MSS NAV clock
+ - description: GCC MSS SNOC_AXI clock
+ - description: GCC MSS MFAB_AXIS clock
+ - description: RPMH XO clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nav
+ - const: snoc_axi
+ - const: mnoc_axi
+ - const: xo
+
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MX power domain
+ - description: MSS power domain
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+ - const: mss
+
+ resets:
+ items:
+ - description: AOSS restart
+ - description: PDC reset
+
+ reset-names:
+ items:
+ - const: mss_restart
+ - const: pdc_reset
+
+ memory-region:
+ items:
+ - description: MBA reserved region
+ - description: modem reserved region
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ - description: Name of MBA firmware
+ - description: Name of modem firmware
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Halt registers are used to halt transactions of various sub-components
+ within MSS.
+ items:
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the Q6 halt register
+ - description: offset to the modem halt register
+ - description: offset to the nc halt register
+
+ qcom,spare-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Spare registers are multipurpose registers used for errata
+ handling.
+ items:
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the conn_box_spare0 register
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ const: stop
+
+ glink-edge:
+ $ref: qcom,glink-edge.yaml#
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the DSP.
+
+ properties:
+ interrupts:
+ items:
+ - description: IRQ from MSS to GLINK
+
+ mboxes:
+ items:
+ - description: Mailbox for communication between APPS and MSS
+
+ label:
+ const: modem
+
+ apr: false
+ fastrpc: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - iommus
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - qcom,spare-regs
+ - memory-region
+ - qcom,qmp
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - glink-edge
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sc7180-mss-pil";
+ reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+ reg-names = "qdsp6", "rmb";
+
+ iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <&gcc GCC_MSS_NAV_AXI_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bus", "nav", "snoc_axi",
+ "mnoc_axi", "xo";
+
+ power-domains = <&rpmhpd SC7180_CX>,
+ <&rpmhpd SC7180_MX>,
+ <&rpmhpd SC7180_MSS>;
+ power-domain-names = "cx", "mx", "mss";
+
+ memory-region = <&mba_mem>, <&mpss_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+ <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+ qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 12>;
+ qcom,remote-pid = <1>;
+ label = "modem";
+ };
+ };
--
2.7.4
On Tue, 05 Jul 2022 17:02:00 +0530, Sibi Sankar wrote:
> Add a separate YAML binding to act as a superset of the PAS and non-PAS
> compatible for SC7280 MSS PIL. This also serves as a way to increase
> readability.
>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
>
> Depends on Krzysztof's remoteproc cleanups and improvements:
> https://patchwork.kernel.org/project/linux-arm-msm/cover/[email protected]/
>
> Previous discussions on PAS vs non-PAS bindings:
> https://lore.kernel.org/lkml/YUps1JfGtf6JdbCx@ripper/ [Bjorn]
> https://lore.kernel.org/lkml/CAE-0n51KBYjZvwGNy06_okmEWjEfRLQO54CYaY6-JnbBk6kOhA@mail.gmail.com/ [Stephen]
>
> v5:
> * Improve phandle-array schemas [Stephen/Rob/Krzysztof]
> * Add more details to the firmware-name/memory region string array [Stephen/Rob]
> * Drop 'items' from label [Rob]
>
> v4:
> * Remove older bindings [Matthias/Krzysztof]
> * Misc. Fixes [Krzysztof]
> * Rebased on v2 of Krzysztof's bindings cleanups
>
> v3:
> * Re-ordered clock list, fixed pdc_sync typo [Rob/Matthias]
>
> .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 31 +--
> .../bindings/remoteproc/qcom,sc7280-mss-pil.yaml | 266 +++++++++++++++++++++
> 2 files changed, 268 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.example.dtb: remoteproc@4080000: glink-edge: False schema does not allow {'interrupts-extended': [[4294967295, 2, 0, 1]], 'mboxes': [[4294967295, 2, 0]], 'label': ['modem'], 'qcom,remote-pid': [[1]]}
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On 05/07/2022 13:31, Sibi Sankar wrote:
> Add proxy interconnect bandwidth votes during modem bootup on SC7280 SoCs.
>
> V5:
> * Improve phandle-array schemas [Stephen/Rob/Krzysztof]
> * Add more details to the firmware-name/memory region string array [Stephen/Rob]
> * Drop 'items' from label [Rob]
> * Drop the patch 1 since Bjorn picked it up
Use proper subject prefixes - you miss here PATCH. The easiest is to use
`git format-patch -v5`. You can do it other way as well, but just make
it a correct patch with proper subject elements.
Best regards,
Krzysztof
On Tue, 05 Jul 2022 17:02:00 +0530, Sibi Sankar wrote:
> Add a separate YAML binding to act as a superset of the PAS and non-PAS
> compatible for SC7280 MSS PIL. This also serves as a way to increase
> readability.
>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
>
> Depends on Krzysztof's remoteproc cleanups and improvements:
> https://patchwork.kernel.org/project/linux-arm-msm/cover/[email protected]/
>
> Previous discussions on PAS vs non-PAS bindings:
> https://lore.kernel.org/lkml/YUps1JfGtf6JdbCx@ripper/ [Bjorn]
> https://lore.kernel.org/lkml/CAE-0n51KBYjZvwGNy06_okmEWjEfRLQO54CYaY6-JnbBk6kOhA@mail.gmail.com/ [Stephen]
>
> v5:
> * Improve phandle-array schemas [Stephen/Rob/Krzysztof]
> * Add more details to the firmware-name/memory region string array [Stephen/Rob]
> * Drop 'items' from label [Rob]
>
> v4:
> * Remove older bindings [Matthias/Krzysztof]
> * Misc. Fixes [Krzysztof]
> * Rebased on v2 of Krzysztof's bindings cleanups
>
> v3:
> * Re-ordered clock list, fixed pdc_sync typo [Rob/Matthias]
>
> .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 31 +--
> .../bindings/remoteproc/qcom,sc7280-mss-pil.yaml | 266 +++++++++++++++++++++
> 2 files changed, 268 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On 05/07/2022 13:32, Sibi Sankar wrote:
> Add a separate YAML binding to act as a superset of the PAS and non-PAS
> compatible for SC7180 MSS PIL. This also serves as a way to increase
> readability.
>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
>
> Depends on Krzysztof's remoteproc cleanups and improvements:
> https://patchwork.kernel.org/project/linux-arm-msm/cover/[email protected]/
>
> Previous discussion on PAS vs non-PAS bindings:
> https://lore.kernel.org/lkml/YUps1JfGtf6JdbCx@ripper/ [Bjorn]
> https://lore.kernel.org/lkml/CAE-0n51KBYjZvwGNy06_okmEWjEfRLQO54CYaY6-JnbBk6kOhA@mail.gmail.com/ [Stephen]
>
> v5:
> * Improve phandle-array schemas [Stephen/Rob/Krzysztof]
> * Add more details to the firmware-name/memory region string array [Stephen/Rob]
> * Drop 'items' from label [Rob]
>
Looks good, thanks!
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On Tue, 5 Jul 2022 17:01:59 +0530, Sibi Sankar wrote:
> Add proxy interconnect bandwidth votes during modem bootup on SC7280 SoCs.
>
> V5:
> * Improve phandle-array schemas [Stephen/Rob/Krzysztof]
> * Add more details to the firmware-name/memory region string array [Stephen/Rob]
> * Drop 'items' from label [Rob]
> * Drop the patch 1 since Bjorn picked it up
>
> [...]
Applied, thanks!
[1/2] dt-bindings: remoteproc: qcom: Convert SC7280 MSS bindings to YAML
commit: 3abe6d654288553de0bf41da1491cfeee83777b7
[2/2] dt-bindings: remoteproc: qcom: Convert SC7180 MSS bindings to YAML
commit: 5eb1c7def66349a5c3a80b7d450d0ed1f56141eb
Best regards,
--
Bjorn Andersson <[email protected]>