2022-08-29 04:54:51

by Xinlei Lee (李昕磊)

[permalink] [raw]
Subject: [PATCH v4,2/2] drm: mediatek: Adjust the dpi output format to MT8186

From: Xinlei Lee <[email protected]>

Dpi output needs to adjust the output format to dual edge for MT8186.

Co-developed-by: Jitao Shi <[email protected]>
Signed-off-by: Jitao Shi <[email protected]>
Signed-off-by: Xinlei Lee <[email protected]>

---
drivers/gpu/drm/mediatek/mtk_dpi.c | 32 +++++++++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 5 ++++
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
3 files changed, 39 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index fb0b79704636..c23ef7deef26 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -14,6 +14,7 @@
#include <linux/of_graph.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/soc/mediatek/mtk-mmsys.h>
#include <linux/types.h>

#include <video/videomode.h>
@@ -28,6 +29,7 @@
#include "mtk_disp_drv.h"
#include "mtk_dpi_regs.h"
#include "mtk_drm_ddp_comp.h"
+#include "mtk_drm_drv.h"

enum mtk_dpi_out_bit_num {
MTK_DPI_OUT_BIT_NUM_8BITS,
@@ -80,6 +82,7 @@ struct mtk_dpi {
struct pinctrl_state *pins_dpi;
u32 output_fmt;
int refcount;
+ struct device *mmsys_dev;
};

static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
@@ -133,6 +136,8 @@ struct mtk_dpi_yc_limit {
* @yuv422_en_bit: Enable bit of yuv422.
* @csc_enable_bit: Enable bit of CSC.
* @pixels_per_iter: Quantity of transferred pixels per iteration.
+ * @edge_cfg_in_mmsys: If the edge configuration for DPI's output needs to be
+ * set in MMSYS.
*/
struct mtk_dpi_conf {
unsigned int (*cal_factor)(int clock);
@@ -151,6 +156,7 @@ struct mtk_dpi_conf {
u32 yuv422_en_bit;
u32 csc_enable_bit;
u32 pixels_per_iter;
+ bool edge_cfg_in_mmsys;
};

static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -447,6 +453,9 @@ static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE ?
EDGE_SEL : 0, EDGE_SEL);
+ if (dpi->conf->edge_cfg_in_mmsys)
+ mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev, DPI_RGB888_DDR_CON,
+ DPI_FORMAT_MASK, NULL);
} else {
mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, 0);
}
@@ -776,8 +785,10 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
{
struct mtk_dpi *dpi = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
+ struct mtk_drm_private *priv = drm_dev->dev_private;
int ret;

+ dpi->mmsys_dev = priv->mmsys_dev;
ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
DRM_MODE_ENCODER_TMDS);
if (ret) {
@@ -928,6 +939,24 @@ static const struct mtk_dpi_conf mt8183_conf = {
.csc_enable_bit = CSC_ENABLE,
};

+static const struct mtk_dpi_conf mt8186_conf = {
+ .cal_factor = mt8183_calculate_factor,
+ .reg_h_fre_con = 0xe0,
+ .max_clock_khz = 150000,
+ .output_fmts = mt8183_output_fmts,
+ .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
+ .edge_cfg_in_mmsys = true,
+ .pixels_per_iter = 1,
+ .is_ck_de_pol = true,
+ .swap_input_support = true,
+ .support_direct_pin = true,
+ .dimension_mask = HPW_MASK,
+ .hvsize_mask = HSIZE_MASK,
+ .channel_swap_shift = CH_SWAP,
+ .yuv422_en_bit = YUV422_EN,
+ .csc_enable_bit = CSC_ENABLE,
+};
+
static const struct mtk_dpi_conf mt8192_conf = {
.cal_factor = mt8183_calculate_factor,
.reg_h_fre_con = 0xe0,
@@ -1078,6 +1107,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
{ .compatible = "mediatek,mt8183-dpi",
.data = &mt8183_conf,
},
+ { .compatible = "mediatek,mt8186-dpi",
+ .data = &mt8186_conf,
+ },
{ .compatible = "mediatek,mt8192-dpi",
.data = &mt8192_conf,
},
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 62bd4931b344..779e868ffb1a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -235,4 +235,9 @@
#define MATRIX_SEL_RGB_TO_JPEG 0
#define MATRIX_SEL_RGB_TO_BT601 2

+/* Values for DPI configuration in MMSYS address space */
+#define DPI_FORMAT_MASK 0x1
+#define DPI_RGB888_DDR_CON BIT(0)
+#define DPI_RGB565_SDR_CON BIT(1)
+
#endif /* __MTK_DPI_REGS_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 4eba8339188a..e85b9552e45b 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -799,6 +799,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
.data = (void *)MTK_DPI },
{ .compatible = "mediatek,mt8183-dpi",
.data = (void *)MTK_DPI },
+ { .compatible = "mediatek,mt8186-dpi",
+ .data = (void *)MTK_DPI },
{ .compatible = "mediatek,mt8192-dpi",
.data = (void *)MTK_DPI },
{ .compatible = "mediatek,mt8195-dp-intf",
--
2.18.0


Subject: Re: [PATCH v4,2/2] drm: mediatek: Adjust the dpi output format to MT8186

Il 29/08/22 05:21, [email protected] ha scritto:
> From: Xinlei Lee <[email protected]>
>
> Dpi output needs to adjust the output format to dual edge for MT8186.
>
> Co-developed-by: Jitao Shi <[email protected]>
> Signed-off-by: Jitao Shi <[email protected]>
> Signed-off-by: Xinlei Lee <[email protected]>
>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 32 +++++++++++++++++++++++++
> drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 5 ++++
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> 3 files changed, 39 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index fb0b79704636..c23ef7deef26 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -14,6 +14,7 @@
> #include <linux/of_graph.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
> #include <linux/types.h>
>
> #include <video/videomode.h>
> @@ -28,6 +29,7 @@
> #include "mtk_disp_drv.h"
> #include "mtk_dpi_regs.h"
> #include "mtk_drm_ddp_comp.h"
> +#include "mtk_drm_drv.h"
>
> enum mtk_dpi_out_bit_num {
> MTK_DPI_OUT_BIT_NUM_8BITS,
> @@ -80,6 +82,7 @@ struct mtk_dpi {
> struct pinctrl_state *pins_dpi;
> u32 output_fmt;
> int refcount;
> + struct device *mmsys_dev;
> };
>
> static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
> @@ -133,6 +136,8 @@ struct mtk_dpi_yc_limit {
> * @yuv422_en_bit: Enable bit of yuv422.
> * @csc_enable_bit: Enable bit of CSC.
> * @pixels_per_iter: Quantity of transferred pixels per iteration.
> + * @edge_cfg_in_mmsys: If the edge configuration for DPI's output needs to be
> + * set in MMSYS.

* @edge_cfg_in_mmsys: Edge configuration for DPI output has to be set in MMSYS.

fits in one line and it's more immediate to read.

After which...

Reviewed-by: AngeloGioacchino Del Regno <[email protected]>

2022-08-29 14:52:58

by Nícolas F. R. A. Prado

[permalink] [raw]
Subject: Re: [PATCH v4,2/2] drm: mediatek: Adjust the dpi output format to MT8186

On Mon, Aug 29, 2022 at 11:21:48AM +0800, [email protected] wrote:
> From: Xinlei Lee <[email protected]>
>
> Dpi output needs to adjust the output format to dual edge for MT8186.
>
> Co-developed-by: Jitao Shi <[email protected]>
> Signed-off-by: Jitao Shi <[email protected]>
> Signed-off-by: Xinlei Lee <[email protected]>

Reviewed-by: N?colas F. R. A. Prado <[email protected]>

Thanks,
N?colas