The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI CSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <[email protected]>
---
.../boot/dts/rockchip/rk3568-rock-3a.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index da2ef705ce29..821f9b96914b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -131,6 +131,22 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
+
+ vcc_cam: vcc-cam {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_cam_en>;
+ regulator-name = "vcc_cam";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
};
&combphy0 {
@@ -454,6 +470,12 @@ rgmii_phy1: ethernet-phy@0 {
};
&pinctrl {
+ cam {
+ vcc_cam_en: vcc_cam_en {
+ rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ethernet {
eth_phy_rst: eth_phy_rst {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.30.2
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI DSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <[email protected]>
---
.../boot/dts/rockchip/rk3568-rock-3a.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 821f9b96914b..33581a36c9c3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -147,6 +147,22 @@ regulator-state-mem {
regulator-off-in-suspend;
};
};
+
+ vcc_mipi: vcc-mipi {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_mipi_en>;
+ regulator-name = "vcc_mipi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
};
&combphy0 {
@@ -476,6 +492,12 @@ vcc_cam_en: vcc_cam_en {
};
};
+ display {
+ vcc_mipi_en: vcc_mipi_en {
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ethernet {
eth_phy_rst: eth_phy_rst {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.30.2
On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI
connector and the M.2/NGFF connector use the non-default pins.
Specify the correct pinctrl but leave the adapters disabled (as
they are supposed to be activated by overlays that describe the
external hardware).
Signed-off-by: Michael Riesch <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 33581a36c9c3..8c533ee0c5c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -468,6 +468,18 @@ codec {
};
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m1_xfer>;
+ status = "disabled";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m1_xfer>;
+ status = "disabled";
+};
+
&i2s1_8ch {
rockchip,trcm-sync-tx-only;
status = "okay";
--
2.30.2
On Tue, 12 Jul 2022 15:32:02 +0200, Michael Riesch wrote:
> The Radxa ROCK3 Model A features a voltage regulator that provides
> a 3V3 supply to the MIPI CSI connector. Add this regulator to the
> device tree of the board.
Applied, thanks!
[1/3] arm64: dts: rockchip: add vcc_cam regulator to rock-3a
commit: 2fd8bd005897436c5a6d2d150d7b1ae2907f8b06
[2/3] arm64: dts: rockchip: add vcc_mipi regulator to rock-3a
commit: 7a3eabdcd0fdc344d31b18e78e4f4b5d94db8df5
[3/3] arm64: dts: rockchip: specify pinctrl for i2c adapters on rock-3a
commit: a233ea1e6268a779d5c8c427eb14a2a89f95f4f9
Best regards,
--
Heiko Stuebner <[email protected]>