From: ChiYuan Huang <[email protected]>
Add bindings for the Richtek RT9471 I2C controlled battery charger.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Co-developed-by: Alina Yu <[email protected]>
Signed-off-by: Alina Yu <[email protected]>
Signed-off-by: ChiYuan Huang <[email protected]>
---
Since v3
- Move unevaluatedProperties line after $ref for binding patch.
- Add Reviewed-by tag for binding patch.
Since v2
- Remove the properties for interrupt controller things in the binding documentation.
- Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
- Add regulator min/max microamp to allow otg vbus current adjustable in example.
- Specify the active-level for charge-enable-gpios in binding example.
---
.../bindings/power/supply/richtek,rt9471.yaml | 73 ++++++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
new file mode 100644
index 00000000..fbb54cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9471.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9471 3A Single Cell Switching Battery charger
+
+maintainers:
+ - Alina Yu <[email protected]>
+ - ChiYuan Huang <[email protected]>
+
+description: |
+ RT9471 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+ portable applications. It supports USB BC1.2 port detection, current and
+ voltage regulations in both charging and boost mode.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RT9471=RT9471D/DS9471D-02.pdf
+
+properties:
+ compatible:
+ const: richtek,rt9471
+
+ reg:
+ maxItems: 1
+
+ charge-enable-gpios:
+ description: GPIO used to turn on and off charging.
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ usb-otg-vbus-regulator:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - wakeup-source
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@53 {
+ compatible = "richtek,rt9471";
+ reg = <0x53>;
+ charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>;
+
+ usb-otg-vbus-regulator {
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4850000>;
+ regulator-max-microvolt = <5300000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <1200000>;
+ };
+ };
+ };
--
2.7.4