Add i.MX8MP PCIe PHY binding.
On i.MX8MM, the initialized default value of PERST bit(BIT3) of
SRC_PCIEPHY_RCR is 1b'1.
But i.MX8MP has one inversed default value 1b'0 of PERST bit.
And the PERST bit should be kept 1b'1 after power and clocks are stable.
So add one more PERST explicitly for i.MX8MP PCIe PHY.
Signed-off-by: Richard Zhu <[email protected]>
Tested-by: Marek Vasut <[email protected]>
Tested-by: Richard Leitner <[email protected]>
Tested-by: Alexander Stein <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/phy/fsl,imx8-pcie-phy.yaml | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
index b6421eedece3..692783c7fd69 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -16,6 +16,7 @@ properties:
compatible:
enum:
- fsl,imx8mm-pcie-phy
+ - fsl,imx8mp-pcie-phy
reg:
maxItems: 1
@@ -28,11 +29,16 @@ properties:
- const: ref
resets:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
reset-names:
- items:
- - const: pciephy
+ oneOf:
+ - items: # for iMX8MM
+ - const: pciephy
+ - items: # for IMX8MP
+ - const: pciephy
+ - const: perst
fsl,refclk-pad-mode:
description: |
@@ -60,6 +66,10 @@ properties:
description: A boolean property indicating the CLKREQ# signal is
not supported in the board design (optional)
+ power-domains:
+ description: PCIe PHY power domain (optional).
+ maxItems: 1
+
required:
- "#phy-cells"
- compatible
--
2.25.1