From: Justin Chen <[email protected]>
We should be disabling clocks when wake from USB is not needed. Since
this wasn't done, we had a clock imbalance since clocks were always
being enabled on resume.
Fixes: ae532b2b7aa5 ("usb: Add "wake on" functionality for newer Synopsis XHCI controllers")
Fixes: b0c0b66c0b43 ("phy: usb: Add support for wake and USB low power mode for 7211 S2/S5")
Signed-off-by: Justin Chen <[email protected]>
---
drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 2 --
drivers/phy/broadcom/phy-brcm-usb-init.h | 1 -
drivers/phy/broadcom/phy-brcm-usb.c | 8 +++++---
3 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
index f78cff2..76cf428 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
@@ -430,7 +430,6 @@ void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
params->family_name = "7216";
params->ops = &bcm7216_ops;
- params->suspend_with_clocks = true;
}
void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
@@ -440,5 +439,4 @@ void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
params->family_name = "7211";
params->ops = &bcm7211b0_ops;
- params->suspend_with_clocks = true;
}
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h
index bedf2b8..f9fbf8f 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.h
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -62,7 +62,6 @@ struct brcm_usb_init_params {
const struct brcm_usb_init_ops *ops;
struct regmap *syscon_piarbctl;
bool wake_enabled;
- bool suspend_with_clocks;
};
void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params);
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index d97fa58..aafba4a 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -602,7 +602,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
* and newer XHCI->2.0-clks/3.0-clks.
*/
- if (!priv->ini.suspend_with_clocks) {
+ if (!priv->ini.wake_enabled) {
if (priv->phys[BRCM_USB_PHY_3_0].inited)
clk_disable_unprepare(priv->usb_30_clk);
if (priv->phys[BRCM_USB_PHY_2_0].inited ||
@@ -619,8 +619,10 @@ static int brcm_usb_phy_resume(struct device *dev)
{
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
- clk_prepare_enable(priv->usb_20_clk);
- clk_prepare_enable(priv->usb_30_clk);
+ if (!priv->ini.wake_enabled) {
+ clk_prepare_enable(priv->usb_20_clk);
+ clk_prepare_enable(priv->usb_30_clk);
+ }
brcm_usb_init_ipp(&priv->ini);
/*
--
2.7.4
On 10/5/2022 2:30 PM, [email protected] wrote:
> From: Justin Chen <[email protected]>
>
> We should be disabling clocks when wake from USB is not needed. Since
> this wasn't done, we had a clock imbalance since clocks were always
> being enabled on resume.
>
> Fixes: ae532b2b7aa5 ("usb: Add "wake on" functionality for newer Synopsis XHCI controllers")
> Fixes: b0c0b66c0b43 ("phy: usb: Add support for wake and USB low power mode for 7211 S2/S5")
> Signed-off-by: Justin Chen <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian