2022-09-08 09:00:50

by Krzysztof Kozlowski

Subject: [PATCH 1/3] ARM: dts: qcom: use generic node name "gpio" in SPMI PMIC

GPIO controller nodes are named by convention just "gpio", not "gpios".

Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +-
arch/arm/boot/dts/qcom-pma8084.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 9cd49deb9fa7..1ac477878c67 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -59,7 +59,7 @@ smbb: charger@1000 {
chg_otg: otg-vbus { };
};

- pm8941_gpios: gpios@c000 {
+ pm8941_gpios: gpio@c000 {
compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index e77602e9f95c..0da6c1a5d547 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -27,7 +27,7 @@ pwrkey@800 {
bias-pull-up;
};

- pma8084_gpios: gpios@c000 {
+ pma8084_gpios: gpio@c000 {
compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
--
2.34.1

2022-10-18 03:10:31

by Bjorn Andersson

Subject: Re: (subset) [PATCH 1/3] ARM: dts: qcom: use generic node name "gpio" in SPMI PMIC

On Thu, 8 Sep 2022 10:09:36 +0200, Krzysztof Kozlowski wrote:
> GPIO controller nodes are named by convention just "gpio", not "gpios".
>
>

Applied, thanks!

[2/3] arm64: dts: qcom: use generic node name "gpio" in SPMI PMIC
commit: c95243eeae587c0fbcaaf53bec9233400005c973

Best regards,
--
Bjorn Andersson <[email protected]>