From: ChiYuan Huang <[email protected]>
The RT6190 is a 4-switch Buck-Boost controller designed for USB power delivery
(USB PD). It operates with wide input voltage range from 4.5V to 36V, and the
output voltage can be programmable between 3V and 36V. It implements peak
current mode control mechanism to deliver up to 100W power with the
programmable constant voltage and constant current output. It also has built-in
charge pumps for driving external low-cost N-MOSFETs to control the power path.
Since v3:
- Fix the typo 'upply' to 'supply'.
- Declare 'enable-gpios' maxItems as 1.
- Declare the 'maxItems' for the property 'regulator-allowed-modes'.
Since v2:
- Rename binding filename to 'richtek,rt6190.yaml'
ChiYuan Huang (2):
dt-bindings: regulator: Add bindings for Richtek RT6190 regulator
regulator: rt6190: Add support for Richtek RT6190 regulator
.../bindings/regulator/richtek,rt6190.yaml | 79 ++++
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rt6190-regulator.c | 495 +++++++++++++++++++++
4 files changed, 586 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml
create mode 100644 drivers/regulator/rt6190-regulator.c
--
2.7.4
On Mon, 31 Oct 2022 10:28:52 +0800, cy_huang wrote:
> From: ChiYuan Huang <[email protected]>
>
> The RT6190 is a 4-switch Buck-Boost controller designed for USB power delivery
> (USB PD). It operates with wide input voltage range from 4.5V to 36V, and the
> output voltage can be programmable between 3V and 36V. It implements peak
> current mode control mechanism to deliver up to 100W power with the
> programmable constant voltage and constant current output. It also has built-in
> charge pumps for driving external low-cost N-MOSFETs to control the power path.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] dt-bindings: regulator: Add bindings for Richtek RT6190 regulator
commit: 8facce4349d46fbc2ac4f6da3786130ddd104440
[2/2] regulator: rt6190: Add support for Richtek RT6190 regulator
commit: e6999e7cca7eecd64c27dc72c51d11cb33079a0c
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark