Convert soundwire bindings text file to DT schema and update
device tree entries to follow strict dt-bindings.
Changes since V5:
-- Update indentation of few properties description.
-- Update minimum and maximum limit for few properties.
-- Fix Typo errors in commit message.
-- Update commit message with differences from text file.
Changes Since V4:
-- Update interrupt names in example.
-- Fix blank lines.
-- Remove dependecy patch info.
-- Split dtsi patches as per SoC.
Changes Since V3:
-- Remove subnode description and add appropriate pattern properties.
-- Add interrput names in example.
-- update some properties description.
-- Revert minIteams change in previous version.
-- Rebase to latest code base.
-- Update dtsi node names,
-- Remove redundant property in soundwire node.
Srinivasa Rao Mandadapu (4):
arm64: dts: qcom: Update soundwire secondary node names
arm64: dts: qcom: sm8250: Remove redundant soundwire property
arm64: dts: qcom: sc7280: Remove redundant soundwire property
dt-bindings: soundwire: Convert text bindings to DT Schema
.../devicetree/bindings/soundwire/qcom,sdw.txt | 215 ----------------
.../bindings/soundwire/qcom,soundwire.yaml | 270 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 -
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +-
arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 4 +-
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 -
9 files changed, 280 insertions(+), 227 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
--
2.7.4
Remove redundant and undocumented property qcom,port-offset in
soundwire controller nodes.
This patch is required to avoid dtbs_check errors with
qcom,soundwire.yaml
Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Ratna Deepthi Kudaravalli <[email protected]>
Signed-off-by: Ratna Deepthi Kudaravalli <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index eb5a10c..0f430ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2360,7 +2360,6 @@
qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
- qcom,port-offset = <1>;
#sound-dai-cells = <1>;
#address-cells = <2>;
#size-cells = <0>;
--
2.7.4
Convert soundwire text bindings to DT Schema format.
Update interrupt property items as per device tree, as it is not
appropriately described in text file.
Update some of the properties description with minimum and maximum range.
Update secondary node info which is used to describe slave devices.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Ratna Deepthi Kudaravalli <[email protected]>
Signed-off-by: Ratna Deepthi Kudaravalli <[email protected]>
---
Changes since V5:
-- Update indentation of few properties description.
-- Update minimum and maximum limit for few properties.
-- Fix Typo errors in commit message.
-- Update commit message with differences from text file.
Changes since V4:
-- Update interrupt names in example.
-- Fix blank lines.
-- Remove dependecy patch info.
Changes since V3:
-- Remove subnode description and add appropriate pattern properties.
-- Add interrput names in example.
-- update some properties description.
-- Revert minIteams change in previous version.
-- Rebase to latest code base.
Changes since V2:
-- Update commit message.
-- Add child node property.
-- Change file name.
-- Remove minIteams for few properties.
-- Remove redundant required properties.
-- Remove redundant description for wakeup-source property.
-- Update interrupt property items.
Changes since V1:
-- Remove the status field in example.
-- Remove interrupt-names property in the required list.
-- Add the wakeup-source property.
.../devicetree/bindings/soundwire/qcom,sdw.txt | 215 ----------------
.../bindings/soundwire/qcom,soundwire.yaml | 270 +++++++++++++++++++++
2 files changed, 270 insertions(+), 215 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
deleted file mode 100644
index e0faed8..0000000
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ /dev/null
@@ -1,215 +0,0 @@
-Qualcomm SoundWire Controller Bindings
-
-
-This binding describes the Qualcomm SoundWire Controller along with its
-board specific bus parameters.
-
-- compatible:
- Usage: required
- Value type: <stringlist>
- Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
- Example:
- "qcom,soundwire-v1.3.0"
- "qcom,soundwire-v1.5.0"
- "qcom,soundwire-v1.5.1"
- "qcom,soundwire-v1.6.0"
- "qcom,soundwire-v1.7.0"
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of SoundWire controller
- address space.
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the SoundWire Controller core and optional
- wake IRQ
-
-- interrupt-names:
- Usage: Optional
- Value type: boolean
- Value type: <stringlist>
- Definition: should be "core" for core and "wakeup" for wake interrupt.
-
-- wakeup-source:
- Usage: Optional
- Value type: boolean
- Definition: should specify if SoundWire Controller is wake up capable.
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: should be "iface" for SoundWire Controller interface clock
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the SoundWire Controller interface clock
-
-- #sound-dai-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 1 for digital audio interfaces on the controller.
-
-- qcom,dout-ports:
- Usage: required
- Value type: <u32>
- Definition: must be count of data out ports
-
-- qcom,din-ports:
- Usage: required
- Value type: <u32>
- Definition: must be count of data in ports
-
-- qcom,ports-offset1:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify payload transport window offset1 of each
- data port. Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-offset2:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify payload transport window offset2 of each
- data port. Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-sinterval-low:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should be sample interval low of each data port.
- Out ports followed by In ports. Used for Sample Interval
- calculation.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-word-length:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be size of payload channel sample.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-block-pack-mode:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be 0 or 1 to indicate the block packing mode.
- 0 to indicate Blocks are per Channel
- 1 to indicate Blocks are per Port.
- Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-block-group-count:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be in range 1 to 4 to indicate how many sample
- intervals are combined into a payload.
- Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-lane-control:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be in range 0 to 7 to identify which data lane
- the data port uses.
- Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-hstart:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be number identifying lowerst numbered coloum in
- SoundWire Frame, i.e. left edge of the Transport sub-frame
- for each port. Values between 0 and 15 are valid.
- Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-hstop:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be number identifying highest numbered coloum in
- SoundWire Frame, i.e. the right edge of the Transport
- sub-frame for each port. Values between 0 and 15 are valid.
- Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,dports-type:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: should be one of the following types
- 0 for reduced port
- 1 for simple ports
- 2 for full port
- Out ports followed by In ports.
- Value of 0xFF indicates that this option is not implemented
- or applicable for the respective data port.
- More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- reset:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: Should specify the SoundWire audio CSR reset controller interface,
- which is required for SoundWire version 1.6.0 and above.
-
-- reset-names:
- Usage: optional
- Value type: <stringlist>
- Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
- controller interface.
-
-Note:
- More Information on detail of encoding of these fields can be
-found in MIPI Alliance SoundWire 1.0 Specifications.
-
-= SoundWire devices
-Each subnode of the bus represents SoundWire device attached to it.
-The properties of these nodes are defined by the individual bindings.
-
-= EXAMPLE
-The following example represents a SoundWire controller on DB845c board
-which has controller integrated inside WCD934x codec on SDM845 SoC.
-
-soundwire: soundwire@c85 {
- compatible = "qcom,soundwire-v1.3.0";
- reg = <0xc85 0x20>;
- interrupts = <20 IRQ_TYPE_EDGE_RISING>;
- clocks = <&wcc>;
- clock-names = "iface";
- resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
- reset-names = "swr_audio_cgcr";
- #sound-dai-cells = <1>;
- qcom,dports-type = <0>;
- qcom,dout-ports = <6>;
- qcom,din-ports = <2>;
- qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
- qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
- qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
-
- /* Left Speaker */
- left{
- ....
- };
-
- /* Right Speaker */
- right{
- ....
- };
-};
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
new file mode 100644
index 0000000..bcbfa71
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire Controller
+
+maintainers:
+ - Srinivas Kandagatla <[email protected]>
+ - Srinivasa Rao Mandadapu <[email protected]>
+
+description:
+ The Qualcomm SoundWire controller along with its board specific bus parameters.
+
+properties:
+ compatible:
+ enum:
+ - qcom,soundwire-v1.3.0
+ - qcom,soundwire-v1.5.0
+ - qcom,soundwire-v1.5.1
+ - qcom,soundwire-v1.6.0
+ - qcom,soundwire-v1.7.0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: specify the SoundWire controller core.
+ - description: specify the Soundwire controller wake IRQ.
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: wakeup
+
+ clocks:
+ items:
+ - description: iface clock
+
+ clock-names:
+ items:
+ - const: iface
+
+ resets:
+ items:
+ - description: SWR_AUDIO_CGCR RESET
+
+ reset-names:
+ items:
+ - const: swr_audio_cgcr
+
+ '#sound-dai-cells':
+ const: 1
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 0
+
+ wakeup-source: true
+
+ qcom,din-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: count of data in ports
+
+ qcom,dout-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: count of data out ports
+
+ qcom,ports-word-length:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Size of payload channel sample.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 5
+
+ qcom,ports-sinterval-low:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Sample interval low of each data port.
+ Out ports followed by In ports. Used for Sample Interval calculation.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 8
+
+ qcom,ports-offset1:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Payload transport window offset1 of each data port.
+ Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 8
+
+ qcom,ports-offset2:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Payload transport window offset2 of each data port.
+ Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 8
+
+ qcom,ports-lane-control:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Identify which data lane the data port uses.
+ Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 5
+
+ qcom,ports-block-pack-mode:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Indicate the block packing mode.
+ 0 to indicate Blocks are per Channel
+ 1 to indicate Blocks are per Port.
+ Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 8
+ items:
+ oneOf:
+ - minimum: 0
+ maximum: 1
+ - const: 0xff
+
+ qcom,ports-hstart:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Identifying lowerst numbered coloum in SoundWire Frame,
+ i.e. left edge of the Transport sub-frame for each port.
+ Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 5
+ items:
+ oneOf:
+ - minimum: 0
+ maximum: 15
+ - const: 0xff
+
+ qcom,ports-hstop:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Identifying highest numbered coloum in SoundWire Frame,
+ i.e. the right edge of the Transport
+ sub-frame for each port. Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 5
+ items:
+ oneOf:
+ - minimum: 0
+ maximum: 15
+ - const: 0xff
+
+ qcom,ports-block-group-count:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ In range 1 to 4 to indicate how many sample intervals are combined
+ into a payload. Out ports followed by In ports.
+ Value of 0xff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 5
+ items:
+ oneOf:
+ - minimum: 0
+ maximum: 4
+ - const: 0xff
+
+ label:
+ maxItems: 1
+
+patternProperties:
+ "^.*@[0-9a-f],[0-9a-f]$":
+ type: object
+ description:
+ Child nodes for a standalone audio codec or speaker amplifier IC.
+ It has RX and TX Soundwire secondary devices.
+ properties:
+ compatible:
+ pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - '#sound-dai-cells'
+ - '#address-cells'
+ - '#size-cells'
+ - qcom,dout-ports
+ - qcom,din-ports
+ - qcom,ports-sinterval-low
+ - qcom,ports-offset1
+ - qcom,ports-offset2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+
+ soundwire@3210000 {
+ compatible = "qcom,soundwire-v1.6.0";
+ reg = <0x03210000 0x2000>;
+
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "core", "wakeup";
+
+ clocks = <&lpass_rx_macro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <0>;
+ qcom,dout-ports = <5>;
+
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+ reset-names = "swr_audio_cgcr";
+
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+ qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+ };
--
2.7.4
Update soundwire secondary nodes of WSA speaker to match with
dt-bindings pattern properties regular expression.
This modification is required to avoid dtbs-check errors
occurred with qcom,soundwire.yaml.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Ratna Deepthi Kudaravalli <[email protected]>
Signed-off-by: Ratna Deepthi Kudaravalli <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 ++--
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 4 ++--
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 2c08500..4c39cec 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1007,7 +1007,7 @@
};
&swr0 {
- left_spkr: wsa8810-left {
+ left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
@@ -1016,7 +1016,7 @@
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-right {
+ right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
reg = <0 4>;
powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 8ba3188..df61526 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1091,7 +1091,7 @@
vdd-io-supply = <&vreg_s4a_1p8>;
swm: swm@c85 {
- left_spkr: wsa8810-left {
+ left_spkr: speaker@0,1 {
compatible = "sdw10217201000";
reg = <0 1>;
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -1100,7 +1100,7 @@
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-right {
+ right_spkr: speaker@0,2 {
compatible = "sdw10217201000";
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
reg = <0 2>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 0c375ec..f32b744 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -785,7 +785,7 @@
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
swm: swm@c85 {
- left_spkr: wsa8810-left {
+ left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -794,7 +794,7 @@
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-right {
+ right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
reg = <0 4>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index f93d748..aa06a4a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -717,7 +717,7 @@
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
swm: swm@c85 {
- left_spkr: wsa8810-left {
+ left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
@@ -726,7 +726,7 @@
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-right {
+ right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
reg = <0 4>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 9db6136..532a77f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -757,7 +757,7 @@
};
&swr0 {
- left_spkr: wsa8810-right@0,3{
+ left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
@@ -766,7 +766,7 @@
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-left@0,4{
+ right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
reg = <0 4>;
powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
--
2.7.4
Remove redundant and undocumented property qcom,port-offset in
soundwire controller nodes.
This patch is required to avoid dtbs_check errors with
qcom,soundwire.yaml
Fixes: 12ef689f09ab ("arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Ratna Deepthi Kudaravalli <[email protected]>
Signed-off-by: Ratna Deepthi Kudaravalli <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 748eef6..71be873 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2317,7 +2317,6 @@
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>;
- qcom,port-offset = <1>;
#sound-dai-cells = <1>;
#address-cells = <2>;
--
2.7.4
On 08/11/2022 15:46, Srinivasa Rao Mandadapu wrote:
> Convert soundwire text bindings to DT Schema format.
>
> Update interrupt property items as per device tree, as it is not
> appropriately described in text file.
> Update some of the properties description with minimum and maximum range.
> Update secondary node info which is used to describe slave devices.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Ratna Deepthi Kudaravalli <[email protected]>
> Signed-off-by: Ratna Deepthi Kudaravalli <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 08-11-22, 20:16, Srinivasa Rao Mandadapu wrote:
> Convert soundwire text bindings to DT Schema format.
>
> Update interrupt property items as per device tree, as it is not
> appropriately described in text file.
> Update some of the properties description with minimum and maximum range.
> Update secondary node info which is used to describe slave devices.
Applied, thanks
--
~Vinod
On Tue, 8 Nov 2022 20:15:59 +0530, Srinivasa Rao Mandadapu wrote:
> Convert soundwire bindings text file to DT schema and update
> device tree entries to follow strict dt-bindings.
> Changes since V5:
> -- Update indentation of few properties description.
> -- Update minimum and maximum limit for few properties.
> -- Fix Typo errors in commit message.
> -- Update commit message with differences from text file.
> Changes Since V4:
> -- Update interrupt names in example.
> -- Fix blank lines.
> -- Remove dependecy patch info.
> -- Split dtsi patches as per SoC.
> Changes Since V3:
> -- Remove subnode description and add appropriate pattern properties.
> -- Add interrput names in example.
> -- update some properties description.
> -- Revert minIteams change in previous version.
> -- Rebase to latest code base.
> -- Update dtsi node names,
> -- Remove redundant property in soundwire node.
>
> [...]
Applied, thanks!
[1/4] arm64: dts: qcom: Update soundwire secondary node names
commit: bd35f4b0179692cacc8cd80aece56012b3b36c69
[2/4] arm64: dts: qcom: sm8250: Remove redundant soundwire property
commit: 837f597ebc529b2dce6451da27f24d93ebe194c8
[3/4] arm64: dts: qcom: sc7280: Remove redundant soundwire property
commit: 78043031281bbb31f89b66128982f404bcde94e8
Best regards,
--
Bjorn Andersson <[email protected]>